No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - IP Service
S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for DNS

Application Scenarios for DNS

Figure 6-2 shows typical networking of a DNS client.

Figure 6-2  Typical networking of a DNS client

As shown in Figure 6-2, the device functions as a DNS client and can dynamically obtain the corresponding IP address of a domain name from a DNS server. This facilitates user communication.

  • If you seldom use domain names to visit other devices or no DNS server is available, configure static DNS on the DNS client. To configure static DNS, you must know the mappings between domain names and IP addresses. If a mapping changes, manually modify the DNS entry on the DNS client.
  • If you want to use domain names to visit many devices and DNS servers are available, you can configure dynamic DNS. Dynamic DNS requires DNS servers.
Updated: 2020-02-26

Document ID: EDOC1000178170

Views: 271451

Downloads: 1026

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next