No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - IP Service
S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DHCP policy VLAN, DNS, mDNS gateway, mDNS relay, UDP Helper, IP performance optimization, IPv6, DHCPv6, IPv6 DNS, IPv6 over IPv4 tunnel, and IPv4 over IPv6 tunnel.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Static Domain Name Resolution

Configuring the Static Domain Name Resolution


A static domain name resolution table is manually set up, describing the mappings between domain names and IP addresses. Some common domain names are added to the table. Static domain name resolution can be performed based on the static domain name resolution table. To obtain the IP address by resolving a domain name, the client searches the static domain name resolution table for the specified domain name. In this manner, the efficiency of domain name resolution is improved.


  1. Run system-view

    The system view is displayed.

  2. Run ip host host-name ip-address [ vpn-instance vpn-instance-name ]

    A static DNS entry is configured.

    By default, no static DNS entries are configured.

    Each host name can be mapped to only one IP address. When one host name is mapped to multiple IP addresses, only the latest configuration takes effect. If multiple host names need to be resolved, repeat this step.

    A maximum of 50 static DNS entries can be configured on the switch.

Updated: 2020-02-26

Document ID: EDOC1000178170

Views: 276034

Downloads: 1032

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next