No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S1720, S2700, S5700, and S6720 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP GR

Configuring BGP GR

Context

BGP restart causes peer relationship reestablishment and traffic interruption. Graceful restart (GR) ensures uninterrupted traffic forwarding in the case of BGP restart.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run graceful-restart

    BGP GR is enabled.

    By default, BGP GR is disabled.

  4. (Optional) Run graceful-restart timer wait-for-rib timer

    The time during which the restarting speaker and receiving speaker wait for End-of-RIB messages is set.

    By default, the time for waiting for End-of-RIB messages is 600 seconds.

  5. (Optional) Run graceful-restart peer-reset

    The device is enabled to reset a BGP session in GR mode.

    By default, a device is not enabled to reset a BGP connection in GR mode.

Verifying the Configuration

  • Run the display bgp peer verbose command to check detailed information about BGP GR.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178171

Views: 334906

Downloads: 1151

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next