Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying Connectivity and Reachability of Seamless MPLS Networks
Context
Run the following commands in any view of a BGP LSP endpoint node to check the connectivity and reachability of a BGP LSP.
Procedure
- Run the ping lsp [ -a source-ip | -c count | -exp exp-value | -h ttl-value | -m interval | -r reply-mode | -s packet-size | -t time-out | -v ] * bgp destination-address mask-length [ ip-address ] command to check BGP LSP connectivity.
- Run the tracert lsp [ -a source-ip | -exp exp-value | -h ttl-value | -r reply-mode | -t time-out ] * bgp destination-address mask-length [ ip-address ] command to perform an LSP tracert operation on a BGP LSP.
