Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Tunnel Policy
Context
In general, VPN traffic is forwarded through an LSP tunnel but not an MPLS TE tunnel. To import VPN traffic to the MPLS TE tunnel, you need to configure a tunnel policy.
Procedure
You can configure either of the
following types of tunnel policies according to service requirements:
- Tunnel type prioritizing policy: Such a policy specifies the sequence in which different types of tunnels are selected by the VPN. For example, you can specify the VPN to select the TE tunnel first.
- Tunnel binding policy: This policy binds a TE tunnel to a specified VPN by binding a specified destination address to the TE tunnel to provide QoS guarantee.
For detailed instructions, see Configuring and Applying a Tunnel Policy in "BGP/MPLS IP VPN Configuration" in the S1720, S2700, S5700, and S6720 V200R011C10 Configuration Guide - VPN.
