Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Static LSP Configuration
Procedure
- Run the display default-parameter mpls management command to check default configurations of the MPLS management module.
- Run the display mpls static-lsp [ lsp-name ] [ { include | exclude } ip-address mask-length ] [ verbose ] command to check the static LSP.
- Run the display mpls label static available [ [ label-from label-index ] label-number label-number ] command to check information about labels available for transmitting static services.
