Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Static BFD for TE Tunnels
Static BFD for TE allows applications such as VPN FRR and VLL FRR to fast switch traffic if the primary tunnel fails, preventing service interruption.
Pre-configuration Tasks
Before configuring static BFD for TE tunnels, complete one of the following tasks:
- Configure a static MPLS TE tunnel. For details, see Configuring a Static MPLS TE Tunnel.
- Configure a dynamic MPLS TE tunnel. For details, see Configuring a Dynamic MPLS TE Tunnel.
- Configure a tunnel protection group. For details, see Configuring a Tunnel Protection Group.
