Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the Establishment of an MPLS TE Tunnel
During establishment of an MPLS TE tunnel, specific configurations are required in practice. MPLS TE provides multiple methods to adjust establishment of MPLS TE tunnels.
Pre-configuration Tasks
Before adjusting establishment of an MPLS TE tunnel, complete the following task:
- Configure a dynamic MPLS TE tunnel. For details, see Configuring a Dynamic MPLS TE Tunnel.
- Configuring Loop Detection
- Configuring Route Record and Label Record
- Configuring Re-optimization for CR-LSP
- Configuring Tunnel Reestablishment Parameters
- Configuring the RSVP Signaling Delay-Trigger Function
- Configuring the Tunnel Priority
- Verifying the Configuration of Adjusting the Establishment of an MPLS TE Tunnel
