Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Dynamic BFD for RSVP
Procedure
- Run the display mpls rsvp-te bfd session { all | interface interface-type interface-number | peer ip-address } [ verbose ] command to check information about the BFD for RSVP session.
- Run the display mpls rsvp-te command to check the RSVP-TE configuration.
- Run the display mpls rsvp-te interface [ interface-type interface-number ] command to check the RSVP-TE configuration on the interface.
- Run the display mpls rsvp-te peer [ interface interface-type interface-number ] command to check information about the RSVP neighbor.
- Run the display mpls rsvp-te statistics { global | interface [ interface-type interface-number ] } command to check RSVP-TE statistics.
