Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MPLS
Procedure
- Run system-view
The system view is displayed.
- Run mpls
MPLS is enabled globally and the MPLS view is displayed.
By default, no node is enabled with MPLS.
- Run quit
Return to the system view.
- Run interface interface-type interface-number
The interface to participate in MPLS forwarding is specified.
- (Optional) On an Ethernet interface, run undo portswitch
The interface is switched to Layer 3 mode.
By default, an Ethernet interface works in Layer 2 mode.Only the S5720HI, S5720EI, S6720EI, and S6720S-EI support switching between Layer 2 and Layer 3 modes.
- Run mpls
MPLS is enabled on the interface.
By default, no interface is enabled with MPLS.
