Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Importing Traffic to an MPLS TE Tunnel
Procedure
- Run the display current-configuration command to view the configuration for importing traffic to an MPLS TE tunnel.
- Run the display ip routing-table command to view the routes with an MPLS TE tunnel interface as the outbound interface.
- Run the display ospf [ process-id ] traffic-adjustment command to check tunnel information about OSPF processes related to traffic adjustment (IGP shortcut and forwarding adjacency).
