No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for LLDP

Default Settings for LLDP

Parameter

Default Setting

LLDP

Enabled globally

Interval for sending LLDP packets

30 seconds

Delay in sending LLDP packets

2 seconds

Hold time multiplier of device information on neighbors

4

Delay in initializing interfaces

2 seconds

Delay in sending a notification after neighbor information changes

5 seconds

Type of the type-length-values (TLVs) that an interface can send

All types of TLVs except the Location Identification TLV

Standard with which the 802.3 Power Via MDI TLV sent by the interface complies

802.3 Power Via MDI TLV

Translation
Download
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 208342

Downloads: 825

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next