No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NQA Transmission Delay Threshold

Configuring the NQA Transmission Delay Threshold

The statistics about the test packets that exceed the threshold are displayed in the NQA test result. This provides a basis for the network administrators to analyze the operating status of the specified service.

Pre-configuration Tasks

Before configuring the NQA transmission threshold and alarm function, complete the following tasks:

  • Ensure that the device is running properly.
  • Create the NQA test instance and configure related parameters.

Configuration Procedure

The configured NQA transmission threshold helps you obtain the statistics about the test packet that exceed the thresholds in the test result. This improves the NQA function and provides an optional configuration for NQA test.

The alarm information can be sent to the NMS only when the routes between the device and NMS are reachable and the related configurations are completed.

Perform the following configurations on the NQA client:

Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 206305

Downloads: 824

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next