No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Configuration Guide - Network Management and Monitoring
S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NetStream Original Flow Statistics Collection on an Interface

Enabling NetStream Original Flow Statistics Collection on an Interface

Context

IPv4 original flow statistics can be exported only if flow statistics collection is enabled on an interface.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the interface interface-type interface-number command to enter the interface view.
  3. Run the ip netstream { inbound | outbound } command to enable the NetStream function on the interface to collect statistics about IPv4 flows.

    By default, NetStream for IPv4 flows is disabled on the interface.

Translation
Download
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 226818

Downloads: 860

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next