No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - Network Management and Monitoring
S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration


The configurations of basic SNMPv2c functions are complete.


  • Run the display snmp-agent community command to check community names.
  • Run the display snmp-agent sys-info version command to check the enabled SNMP version.
  • Run the display acl acl-number command to check ACL rules.
  • Run the display snmp-agent mib-view command to check MIB views.
  • Run the display snmp-agent sys-info contact command to check the administrator's contact information.
  • Run the display snmp-agent sys-info location command to check the location of the switch.
  • Run the display current-configuration | include max-size command to check the maximum size of an SNMP packet.
  • Run the display current-configuration | include trap command to check trap configuration.
  • Run the display snmp-agent trap all command to check current and default status of all traps of all features.
  • Run the display snmp-agent target-host command to check information about the target host.
  • Run the display snmp-agent inform [ address udp-domain ip-address [ vpn-instance vpn-instance-name ] params securityname { security-name | cipher security-name } ] command to check configurations of all or specified target hosts that send informs.
  • Run the display snmp-agent extend error-code status command to check whether the function that the device sends extended error codes to the NMS is enabled.
  • Run the display snmp-agent notification-log command to view the inform logs saved in the inform log buffer.
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 225874

Downloads: 857

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next