No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of NQA Configuration Tasks

Summary of NQA Configuration Tasks

Table 7-1 describes the NQA test instance supported by switches.

Table 7-1  NQA Test Instances Supported by the Switches
NQA Test Instances

S1720GFR, S1720GW, S1720GWR, S1720GW-E, S1720GWR-E, S1720X, S1720X-E

S2720EI, S2750EI, S5700LI, S5700S-LI, S5710-X-LI

S5720LI, S5720S-LI, S5720SI, S5720S-SI, S5730SI, S5730S-EI

S6720LI, S6720S-LI, S6720SI, S6720S-SI



S6720EI, S6720S-EI

DNS test, FTP test, HTTP test

ICMP test, ICMP jitter test

SNMP test, trace test, path jitter test

TCP test, UDP test, UDP jitter test

Supported Supported

MAC ping test

Not supported by the S1720GFR Supported

LSP ping test, LSP jitter test, LSP trace test

PWE3 ping test, PWE3 trace test

Not Supported Supported

Configuring Basic NQA Test Functions

You can perform an NQA test by Configuring an NQA Test Instance and Scheduling an NQA Test Instance.

Configuring Extended NQA Test Functions

The following extended NQA functions are optional in NQA configuration:

Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 209485

Downloads: 831

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next