No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
1:N Mirroring Specifications

1:N Mirroring Specifications

  • Concept

    1:N mirroring binds one mirrored port to a number (N) of observing ports, as shown in Figure 9-9.

    Figure 9-9  1:N mirroring

    For 1:N port mirroring, a mirrored port can be bound to N observing ports in each direction (inbound and outbound).

    For 1:N traffic mirroring, a traffic mirroring behavior bound to a traffic classifier contains N observing ports that are configured in a batch. That is, to implement 1:N traffic mirroring, the traffic behavior must specify an observing port group.

    For 1:N VLAN mirroring or MAC address mirroring, the observing port group bound to the inbound direction of a VLAN contains N observing ports. That is, to implement 1:N VLAN mirroring or MAC address mirroring, you must bind an observing port group to the inbound direction of a VLAN.

    This section provides the specifications of 1:N port mirroring. The N values of other 1:N mirroring features are the same as those of 1:N port mirroring.

  • Specifications

    Huawei S series fixed switches of V200R003 and earlier versions do not support 1:N mirroring.

    Table 9-5  1:N mirroring specifications in the inbound and outbound directions of different devices in V200R005 and later versions
    Device Number of Observing Ports to Which a Mirrored Port Can Be Bound in the Inbound Direction Number of Observing Ports to Which a Mirrored Port Can Be Bound in the Outbound Direction
    S1720GFR 1 1
    S1720GW, S1720GWR 1 1
    S1720GW-E, S1720GWR-E 1 1
    S1720X, S1720X-E 1 1
    S2720EI 1 1
    S2750EI 1 1
    S5700LI, S5700S-LI, S5720LI, S5720S-LI 1 1
    S5710-X-LI 1 1
    S5700SI 1 1
    S5720SI, S5720S-SI 1 1
    S5730SI 1 1
    S5730S-EI 1 1
    S5700EI 1 1
    S5710EI 4 4
    S5720EI 4 4
    S5700HI 4 4
    S5710HI 4 4
    S5720HI

    A mirrored port can be bound to only one observing port or observing port group, which must be the same in both the inbound and outbound directions. One observing port group contains a maximum of 64 observing ports.

    S6700EI Y (Y ≤ 4) 4-Y (Y ≤ 4)

    S6720LI, S6720S-LI

    1 1
    S6720SI, S6720S-SI 1 1
    S6720EI, S6720S-EI Y (Y ≤ 4) 4-Y (Y ≤ 4)

    In 1:N mirroring, if you bind a mirrored port to multiple observing ports in a batch in either the inbound or outbound direction, the mirrored port cannot be bound to other observing ports in the same direction.

Translation
Download
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 209491

Downloads: 831

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next