No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of NQA

Overview of NQA


Network Quality Analysis (NQA) measures network performance and collects statistics on delay, jitter, and packet loss ratio. NQA monitors network quality of service (QoS) in real time and locates and diagnoses network faults.


To visualize the quality of network services and allow users to check whether the quality of network services meets requirements, the following measures must be taken:

  • Collect data on network devices to describe the quality of network services.

  • Deploy probe devices to monitor the quality of network services.

To carry out the preceding measures, devices must provide statistical parameters such as delay, jitter, and packet loss ratio. This requires dedicated probe devices, which increases operation costs.

NQA can precisely test the network operating status and output statistics without using dedicated probe devices, effectively reducing costs.

NQA measures the performance of different protocols running on the network. It allows you to collect network operation indexes on the following in real time:
  • Total HTTP connection delay
  • TCP connection delay
  • DNS resolution delay
  • File transmission speed
  • FTP connection delay
  • DNS resolution error rate
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 208063

Downloads: 825

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next