No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Service Diagnosis

Licensing Requirements and Limitations for Service Diagnosis

Involved Network Elements

Other network elements are not required.

Licensing Requirements

Service diagnosis configuration commands are available only after the S1720GW, S1720GWR, and S1720X have the license (WEB management to full management Electronic RTU License) loaded and activated and the switches are restarted. Service diagnosis configuration commands on other models are not under license control.

For details about how to apply for a license, see S Series Switch License Use Guide.

Version Requirements

Table 8-2  Products and versions supporting service diagnosis

Product

Product Model

Software Version

S1700

S1720GFR

V200R006C10, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S1720GW, S1720GWR

V200R010C00, V200R011C00, V200R011C10

S1720GW-E, S1720GWR-E

V200R010C00, V200R011C00, V200R011C10

S1720X, S1720X-E

V200R011C00, V200R011C10

Other S1700 models

Models that cannot be configured using commands. For details about features and versions, see S1700 Documentation Bookshelf.

S2700

S2700SI

Not supported

S2700EI

Not supported

S2710SI

Not supported

S2720EI

V200R006C10, V200R009C00, V200R010C00, V200R011C10

S2750EI

V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S3700

S3700SI

Not supported

S3700EI

Not supported

S3700HI

Not supported

S5700

S5700LI

V200R003(C00&C02&C10), V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S5700S-LI

V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S5710-C-LI

Not supported

S5710-X-LI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S5700SI

V200R003C00, V200R005C00

S5700EI

V200R003C00, V200R005(C00&C01&C02&C03)

S5710EI

V200R003C00, V200R005(C00&C02)

S5720EI

V200R007C00, V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S5720LI, S5720S-LI

V200R010C00, V200R011C00, V200R011C10

S5720SI, S5720S-SI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S5730SI

V200R011C10

S5730S-EI

V200R011C10

S5700HI

V200R003C00, V200R005(C00SPC500&C01&C02)

S5710HI

V200R003C00, V200R005(C00&C02&C03)

S5720HI

V200R006C00, V200R007(C00&C10), V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S6700

S6700EI

V200R003C00, V200R005(C00&C01&C02)

S6720LI, S6720S-LI

V200R011C00, V200R011C10

S6720SI, S6720S-SI

V200R011C00, V200R011C10

S6720EI

V200R008C00, V200R009C00, V200R010C00, V200R011C00, V200R011C10

S6720S-EI

V200R009C00, V200R010C00, V200R011C00, V200R011C10

To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • Service diagnosis affects system performance. Therefore, enable service diagnosis only when fault locating is required. After locating faults, immediately run the undo trace enable command to disable service diagnosis.
  • Users with different services have different attributes. Create diagnosis objects for different services based on different attributes.
    • DHCP service: based on the MAC address.
    • AAA and NAC services: based on the MAC address, IP address, user name, user VLAN ID, access mode, or interface number.
Translation
Download
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 208976

Downloads: 827

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next