No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Stopping an NQA Test Instance

(Optional) Stopping an NQA Test Instance

Context

A running NQA test instance can stop in the following modes:
  • The test stops automatically after all test packets are sent.
  • Stop the NQA test instance at a specified time.
  • Stop the NQA test instance after a delay.
Stop a running NQA test instance using either of the following commands:
  • Run the undo start command to stop the running NQA test instance.
  • Run the stop command to stop the running NQA test instance.

Procedure

  • Run the undo start command.
    1. Run system-view

      The system view is displayed.

    2. Run nqa test-instance admin-name test-name

      The NQA view is displayed.

    3. Run undo start

      The running NQA test instance is stopped.

  • Run the stop command.
    1. Run system-view

      The system view is displayed.

    2. Run nqa test-instance admin-name test-name

      The NQA view is displayed.

    3. Run stop

      The running NQA test instance is stopped.

Translation
Download
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 206583

Downloads: 824

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next