No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NetStream Sampling

Configuring NetStream Sampling


You can set the intervals for sampling packets so that only statistics of sampled packets are collected. The statistics show the flow status on the entire network. The sampling function reduces the impact of NetStream on device performance.

When there is little traffic on the network, you can configure suppression ratio to control flow sampling, instead of sampling.


  1. Run the system-view command to enter the system view.
  2. Run the interface interface-type interface-number command to enter the interface view.
  3. Run the ipv6 netstream sampler fix-packets packet-interval { inbound | outbound } command to configure IPv6 packet sampling on the interface.

    By default, the packet-based regular sampling is used. The default packet sampling rate is 1000.

Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 209234

Downloads: 829

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next