No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Configuration Guide - Network Management and Monitoring
S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A Busy Record Exists in the UDP Jitter Test Result

A Busy Record Exists in the UDP Jitter Test Result


If the UDP jitter test result has busy records, the value of the System busy operation number field in the display nqa results command output is not 0. This fault is commonly caused by one of the following: The VPN route instance that is configured in the UDP jitter test instance is unreachable.


  1. Run the display nqa-agent admin-name test-name [ verbose ] command on the NQA client or run the display this command in the NQA test instance view to check whether the VPN instance is configured.
  2. Run the ping command on the NQA client to check whether the destination address is reachable.
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 226807

Downloads: 860

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next