No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Network Management and Monitoring

S1720, S2700, S5700, and S6720 V200R011C10

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, NetStream, sFlow, TWAMP Light, and NETCONF.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Interface Initialization Delay

(Optional) Configuring the Interface Initialization Delay

Context

Interface initialization delay refers to the delay before LLDP is re-enabled on an interface. The delay suppresses the topology flapping caused by frequent LLDP status changes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run lldp restart-delay delay

    The interface initialization delay is set.

    The default delay is 2 seconds.

Translation
Download
Updated: 2020-02-06

Document ID: EDOC1000178174

Views: 208084

Downloads: 825

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next