No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying an ACL to SNMP to Filter NMSs

Applying an ACL to SNMP to Filter NMSs

To control which NMSs can access a device, you can apply an ACL to the SNMP module.

In Figure 2-5, to manage the remote switch conveniently, the administrator configures the SNMP agent service on the switch so that the agent can report the switch's status to the NMS in a timely manner and the NMS can remotely control the switch. In addition, an ACL-based NMS access right control is configured to allow only the trusted NMS (NMS2) to manage the switch.

Figure 2-5  Applying an ACL to SNMP to filter NMSs

Updated: 2019-03-28

Document ID: EDOC1000178177

Views: 222641

Downloads: 720

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next