No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling User-Level Rate Limiting on Interface

Disabling User-Level Rate Limiting on Interface

Context

By default, the switch performs user-level rate limiting on the users connecting to all interfaces. If you are sure that the users connecting to an interface are secure, you can disable user-level rate limiting on this interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run host-car disable

    User-level rate limiting is disabled on the interface.

    By default, the user-level rate limiting is enabled on all interfaces.

Translation
Download
Updated: 2019-03-28

Document ID: EDOC1000178177

Views: 222061

Downloads: 720

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next