No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring DHCP Snooping Attack Mitigation

Configuring DHCP Snooping Attack Mitigation

After basic DHCP snooping functions are configured, DHCP clients can obtain IP addresses from the authorized DHCP server, preventing attacks on the network from bogus DHCP servers. However, many other DHCP attacks exist on the network. To mitigate these attacks, configure DHCP snooping attack mitigation functions on the device as required.

In this chapter, the function in Configuring Defense Against Bogus DHCP Message Attacks and the function in step 2 of Configuring Defense Against DHCP Server DoS Attacks are also applicable to DHCPv6 snooping.


Basic DHCP snooping functions have been configured.

Updated: 2019-09-23

Document ID: EDOC1000178177

Views: 232573

Downloads: 747

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next