No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Does a Switch Support the Binding of One Interface and Multiple IP Addresses

Does a Switch Support the Binding of One Interface and Multiple IP Addresses

A switch supports the binding of one interface and multiple IP addresses.
  • If you need to bind non-contiguous IP addresses to an interface, enter 1 to 10 IP addresses in the command. For example, bind IP addresses 10.1.1.2, 10.1.1.5 and 10.1.1.12 to GE0/0/1.
    <HUAWEI> system-view
    [HUAWEI] user-bind static ip-address 10.1.1.2 10.1.1.5 10.1.1.12 interface gigabitethernet 0/0/1
    
  • If you need to bind contiguous IP addresses to an interface, enter 1 to 10 IP address segments in the command. The entered IP address segments cannot overlap. For example, bind IP address segments 10.2.1.1-10.2.1.10 and 10.2.1.20-10.2.1.30 to GE0/0/1.
    <HUAWEI> system-view
    [HUAWEI] user-bind static ip-address 10.2.1.1 to 10.2.1.10 10.2.1.20 to 10.2.1.30 interface gigabitethernet 0/0/1
    
Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178177

Views: 233002

Downloads: 750

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next