No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the PPPoE+ Function

Enabling the PPPoE+ Function

Context

To prevent user account fraud, enable the PPPoE+ function. Before configuring other PPPoE+ functions, enabled PPPoE+ globally.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run pppoe intermediate-agent information enable

    PPPoE+ is enabled globally.

    After the pppoe intermediate-agent information enable command is configured in the system view, PPPoE+ is enabled on all interfaces.

    By default, PPPoE+ is disabled globally.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178177

Views: 231264

Downloads: 746

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next