No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Are deny and permit in ACL Rules Used in Different Services?

How Are deny and permit in ACL Rules Used in Different Services?

The deny and permit parameters in ACL rules have different functions in different services.

  • Traffic policy

    1. When permit is used in the ACL rule, the system executes the specified traffic behavior only when traffic matches the ACL rule. When the traffic behavior is deny, the system discards traffic matching the rule. When the traffic behavior is permit, the system forwards traffic matching the rule.

    2. When deny is used in the ACL rule, the system discards traffic matching the ACL rule regardless of the traffic behavior.

    3. If an ACL does not contain rules, the traffic policy referencing the ACL does not take effect.

  • Telnet

    1. When permit is used in the ACL rule:
      • If the ACL is applied in the inbound direction, the device with the specified source IP address can access the local device.
      • If the ACL is applied in the outbound direction, the local device can access the device with the specified source IP address.
    2. When deny is used in the ACL rule:

      • If the ACL is applied in the inbound direction, other devices cannot access the local device.
      • If the ACL is applied in the outbound direction, the local device cannot access other devices.
    3. When the ACL contains no rule:

      • If the ACL is applied in the inbound direction, any other devices can access the local device.
      • If the ACL is applied in the outbound direction, the local device can access any other devices.
  • HTTP

    1. The device with the specified source IP address can establish an HTTP connection with the local device only when permit is used in the ACL rule.

    2. When deny is used in the ACL rule, other devices cannot establish HTTP connections with the local device.

    3. When the ACL contains no rule, any other devices can establish HTTP connections with the local device.

  • FTP

    1. The device with the specified source IP address can establish an FTP connection with the local device only when permit is used in the ACL rule.

    2. When deny is used in the ACL rule, other devices cannot establish FTP connections with the local device.

    3. When the ACL contains no rule, any other devices can establish FTP connections with the local device.

  • TFTP

    1. The device with the specified source IP address can establish a TFTP connection with the local device only when permit is used in the ACL rule.

    2. When deny is used in the ACL rule, the local device cannot establish TFTP connections with other devices.

    3. When the ACL contains no rule, the local device can establish TFTP connections with any other devices.

  • SNMP

    1. When permit is used in the ACL rule, an NMS with a specified source IP address can access the local device.

    2. When deny is used in the ACL rule, the local device rejects access from other NMS.

    3. When the ACL does not contain rules, the local device access from any other NMS.

  • NTP

    1. When permit is used in the ACL rule, the ntp-service access command takes effect.

    2. When deny is used in the ACL rule, the ntp-service access command does not take effect.

    3. When the ACL does not contain rules, the ntp-service access command does not take effect.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178177

Views: 233610

Downloads: 750

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next