No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S1720, S2700, S5700, and S6720 V200R011C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, MPAC, separating the management plane from the service plane, security risks, PKI.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Applying the Keychain

Applying the Keychain

Context

The keychain only takes effect after it is applied to an application.

This section uses RIP as an example to describe how to apply the keychain to applications. Different applications may use different commands to apply the Keychain. Table 15-4 lists the commands used by different applications.
Table 15-4  Protocols that support the keychain authentication
Protocol Link

RIP

rip authentication-mode

MSDP

peer keychain(MSDP)

OSPF

authentication-mode(OSPF)

ospf authentication-mode

IS-IS

area-authentication-mode

isis authentication-mode

BGP\BGP4+

peer keychain(BGP)

MPLS LDP

authentication key-chain

MPLS RSVP

mpls rsvp-te authentication

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface vlanif vlanif-id

    The VLANIF interface view is displayed.

  3. Run rip authentication-mode md5 nonstandard { keychain keychain-name | { plain plain-text | [ cipher ] password-key } key-id }

    The keychain used by RIP is configured.

Translation
Download
Updated: 2019-03-28

Document ID: EDOC1000178177

Views: 221622

Downloads: 720

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next