No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

S7700 and S9700 V200R011C10

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VPN Configuration Commands

VPN Configuration Commands

NOTE:
  • The MPLS function of the switch is controlled by the license. By default, the MPLS function is disabled on a newly-purchased switch.
  • The SA series cards do not support the MPLS VPN feature, and support only the MCE-related commands.
  • The SA series cards do not support GRE.
  • The XGE interface connected to ACU2 does not support VLL, PWE3, or VPLS and can provide other VPN features.
Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178288

Views: 28764

Downloads: 109

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next