No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-CONFIG-MAN-MIB

HUAWEI-CONFIG-MAN-MIB

Functions Overview

Configuration is an important concept for devices. Configuration is composed of several commands that can be identified and implemented by devices. Devices can implement certain functions or come to certain effects through valid configurations.

HUAWEI-CONFIG-MAN-MIB is used to manage the MIB used to configure devices. It describes the configuration of a complete set of devices, including the auxiliary device. The NMS can check the log messages when the configuration changes, and manage devices.

The root directory of this MIB is as follows:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiUtility(6).hwConfig(10)

Relationships Between Tables

Figure 25-1  Relationship between tables

Figure 25-2  Relationship between tables

Figure 25-3  Relationship between tables

Figure 25-4  Relationship between tables

Description of Single Objects

hwCfgRunModifiedLast

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.1

hwCfgRunModifiedLast

TimeTicks

Read-only

The object indicates the latest time when you perform the SET operation on the NMS.

NOTE:
The object value changes when an interface board is inserted or removed.The object value does not change if you perform configuration using command lines.

This object is implemented as defined in the corresponding MIB files.

hwCfgRunSavedLast

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.2

hwCfgRunSavedLast

TimeTicks

Read-only

The object indicates the latest time when the running configuration is saved.

NOTE:
If the value of this object is smaller than the value of hwCfgRunModifiedLast, this indicates that the configuration is not saved.

This object is implemented as defined in the corresponding MIB files.

hwCfgStartModifiedLast

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.3

hwCfgStartModifiedLast

Timeticks

Read-only

The object indicates the latest time when the startup configuration file is modified.

NOTE:
Saving or copying the configuration file may cause the value of this object to change.

This object is implemented as defined in the corresponding MIB files.

hwCfgLogLimitedEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.4

hwCfgLogLimitedEntries

Integer32 (0..2147483647)

Read-only

The value of the object identifies the maximum number of lines in the log table. Now the value supported by the system is 10.

This object is implemented as defined in the corresponding MIB files.

hwCfgLogDeletedEntries

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.5

hwCfgLogDeletedEntries

Counter32

Read-only

The object indicates the number of entries deleted from the log table.

This object is implemented as defined in the corresponding MIB files.

hwCfgLogWantBackup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.6

hwCfgLogWantBackup

TruthValue

Read-write

The object indicates whether the log supports hot backup. The default value is true.

This object is implemented as defined in the corresponding MIB files.

hwCfgOperateGlobalEntryLimit

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.1

hwCfgOperateGlobalEntryLimit

Integer32 (1..10)

Read-only

The value of the object identifies the maximum number of lines in the operation table.

This object is implemented as defined in the corresponding MIB files.

hwCfgOperateEntryAgeOutTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.2

hwCfgOperateEntryAgeOutTime

Integer32 (1..60)

Read-write

The value of the object identifies the aging time of the operation. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

hwCfgOperateResultGlobalEntryLimit

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.3

hwCfgOperateResultGlobalEntryLimit

Integer32 (1..50)

Read-write

The value of the object identifies the maximum number of lines in the operation result table. The default value is 5.

This object is implemented as defined in the corresponding MIB files.

hwCfgOperateCompareConfig

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.7

hwCfgOperateCompareConfig

INTEGER{initial(0),same(1),different(2)}

Read-write

The current configuration is compared with the one saved in the system.

  • 0: indicates that the configurations are different.
  • 1: indicates that the configurations are the same.
To obtain the correct value, perform the following operations in sequence:
  1. Perform the Set operation to compare the existing configuration file with that saved on the device.
  2. Perform the Walk or Get operation to obtain the result.

hwCfgRestoreErrCode

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.8

hwCfgRestoreErrCode

INTEGER{warning(1),fileOpenFail(2),fileNotExist(3),fileVerifyFail(4),other(5)}

accessible-for-notify

Error Code.
  • 1: Failed to restore some configurations.
  • 2: Failed to restore all configurations because of a failure to open the configuration file.
  • 3: Failed to restore all configurations because of the nonexistent configuration file.
  • 4: Failed to restore all configurations because of the nonexistent configuration file.
  • 5: Failed to restore all configurations because of other reasons.

This object is implemented as defined in the corresponding MIB files.

hwCfgOperateLockConfigDataStore

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.4.1

hwCfgOperateLockConfigDataStore

INTEGER

{

inactive(1),

active(2)

}

Read-write

Config data unit lock/unlock controller,if set active(2),the lock will be locked if no one locked it before.

If set inactive(1),the lock will be unlocked if the current user locked it before.

This object is implemented as defined in the corresponding MIB files.

hwCfgSaveAutoInterval

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.3.1

hwCfgSaveAutoInterval

Integer32(0|30..43200)

Read-write

Indicates the autosave interval.
  • If the value is 0, the autosave function is disabled.
  • If the autosave function is enabled, the default autosave interval is 30 minutes.

By default, the autosave function is disabled.

This object is implemented as defined in the corresponding MIB files.

hwCfgSaveAutoTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.3.2

hwCfgSaveAutoTime

DateAndTime

Read-only

The object records the latest date and time when the current configurations were saved automatically in the system.

Currently, the value supported is 8 and 11.

hwCfgSaveAutoCpuLimit

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.3.4

hwCfgSaveAutoCpuLimit

Integer32(1..60)

Read-write

The value of this object identifies the threshold of the CPU usage during the autosave operation.

The value ranges from 1 to 60. By default, the value is 50.

This object is implemented as defined in the corresponding MIB files.

hwCfgSaveAutoDelay

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.3.6

hwCfgSaveAutoDelay

Integer(1..60)

Read-write

This object indicates the delay for automatically saving configurations in response to configuration changes.

This object is implemented as defined in the corresponding MIB files.

hwCfgSaveManualTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.3.3

hwCfgSaveManualTime

DateAndTime

Read-only

The object records the latest date and time when the current configurations were saved manually in the system.

Currently, the value supported is 8 and 11.

Description of MIB Tables

hwCfgLogTable

This table is a log table, recording the situation when the operation configuration and start configuration change.

The index of the table is hwCfgLogIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.1.7.1.1

hwCfgLogIndex

Integer32 (SIZE (1..2147483647))

Not-accessible

The value of this object identifies configuration log.

Currently, the maximum access is accessible-for-notify.

1.3.6.1.4.1.2011.6.10.1.1.7.1.2

hwCfgLogTime

TimeTicks

Read-only

The object indicates the sysUpTime when the configuration log was generated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.3

hwCfgLogSrcCmd

INTEGER{cmdLine(1), snmp(2),netconf(3),other(4)}

Read-only

The value of the object indicates the configuration tool, command line, SNMP, or other modes adopted when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.4

hwCfgLogSrcData

INTEGER{erase(1),runningData(2),commandSource(3),startupData(4),local(5),netFtp(6), hotPlugging(7)}

Read-only

The value of the object identifies the data source used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.5

hwCfgLogDesData

INTEGER{unknown(1),runningData(2), commandSource(3),startupData(4),local(5), netkFtp(6), hotPlugging(7) }

Read-only

The value of the object identifies the destination data used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.6

hwCfgLogTerminalType

INTEGER{notApplicable(1), unknown(2), console(3), terminal(4), virtual(5), auxiliary(6) }

Read-only

The value of the object identifies the terminal type used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.7

hwCfgLogTerminalUser

DisplayString (SIZE (0..256))

Read-only

The object indicates the terminal user when the configuration changes.

Currently, the value range of 0 to 64 is supported.

1.3.6.1.4.1.2011.6.10.1.1.7.1.8

hwCfgLogTerminalNum

Integer32

Read-only

The value of the object identifies the terminal number used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.9

hwCfgLogTerminalLocation

DisplayString (SIZE (0..64))

Read-only

The object indicates the terminal location used when the configuration changes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.10

hwCfgLogCmdSrcAddress

IpAddress

Read-only

The object indicates the address of the command source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.11

hwCfgLogVirHost

DisplayString (SIZE (0..64))

Read-only

The object indicates the virtual host name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.12

hwCfgLogUserName

DisplayString (SIZE (0..256))

Read-only

The object indicates the FTP user name. The object is valid only when the value of the hwCfgLogSrcData or the hwCfgLogDesData is netkFtp(6); otherwise, the object is a string of 0 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.13

hwCfgLogServerAddress

IpAddress

Read-only

The object indicates the FTP server address. The object is valid only when the value of the hwCfgLogSrcData or the hwCfgLogDesData is netkFtp(6); otherwise, the value of the object is 0.0.0.0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.1.7.1.14

hwCfgLogFile

DisplayString (SIZE (0..64))

Read-only

The object indicates the file name. The object is valid only when the value of the hwCfgLogSrcData or the hwCfgLogDesData is netkFtp(6); otherwise, the object is a string of 0 characters.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Modification

The following entries can be read:

  • hwCfgLogTime

  • hwCfgLogSrcCmd

  • hwCfgLogSrcData

  • hwCfgLogDesData

  • hwCfgLogTerminalType

  • hwCfgLogTerminalUser

  • hwCfgLogTerminalNum

  • hwCfgLogTerminalLocation

  • hwCfgLogCmdSrcAddress

  • hwCfgLogVirHost

  • hwCfgLogUserName

  • hwCfgLogServerAddress

  • hwCfgLogFile

hwCfgOperateTable

The table is an operation table, providing the operation mode through network management.

The index of the table is hwCfgOperateIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.4.1.1

hwCfgOperateIndex

Integer32 (1..2147483647)

Not-accessible

The value of this object identifies operation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.2

hwCfgOperateType

ConfigOperationType

Read-create

The value of the object identifies the operation type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.3

hwCfgOperateProtocol

INTEGER{ftp(1)tftp(2)sftp(3)}

Read-create

The value of the object identifies the used protocol.

FTP or TFTP is insecure. Therefore, configuring SFTP is recommended.

This object is implemented as defined in the corresponding MIB files.

When this object is set to sftp(3), only a password can be used for authentication. If a public key is used, the authentication fails.

1.3.6.1.4.1.2011.6.10.1.2.4.1.4

hwCfgOperateFileName

DisplayString (SIZE (1..128))

Read-create

The object indicates the file name.

  • If the file name does not contain any path, the file name length is 1 to 64 bytes.
  • If the file name contains a path, the file name length is 1 to 128 bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.5

hwCfgOperateServerAddress

IpAddress

Read-create

The object indicates the address of the server.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.6

hwCfgOperateUserName

DisplayString (SIZE (1..40))

Read-create

The object indicates the FTP user name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.7

hwCfgOperateUserPassword

DisplayString (SIZE (0..40))

Read-create

The object indicates the FTP user password.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.8

hwCfgOperateEndNotificationSwitch

TruthValue

Read-create

The object indicates whether the Trap message is sent when the operation is complete.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.9

hwCfgOperateRowStatus

RowStatus

Read-create

The object indicates the status of the operation row.

When the status is Active, the following situations occur:

  • If the mapping instance is transmitted through FTP/TFTP, the transmission can be aborted by setting the current status as notInService.
  • In other cases, the transmission of the instance cannot be aborted even the status is set to notInService.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.10

hwCfgOperateServerPort

Integer32(1..65535)

Read-create

The value of the object identifies the number of the listening port on the FTP/SFTP server:
  • The default listening port number of an SFTP server is 22.
  • The default listening port number of an FTP server is 21.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.11

hwCfgOperateSourceAddress

IpAddress

Read-create

This object indicates the source IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.12

hwCfgOperateSourceInterface

OCTET STRING(SIZE (1..47))

Read-create

This object indicates the source interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.13

hwCfgOperateOnError

INTEGER

{

continueOnError(1),

stopOnError(2),

rollbackOnError(3)

}

read-create

The value of the object identifies the follow-up operation if a command fails to be run.
  • continueOnError: The system ignores the command that fails to be run and proceeds to run the next command.

  • stopOnError: The system no longer runs following commands.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.17

hwCfgOperateServerAddressType

InetAddressType

read-create

This object identifies the type of an IP address that an FTP, TFTP, or SFTP server uses.
  • 1: IPv4 address
  • 2: IPv6 address

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.4.1.18

hwCfgOperateServerAddressNet

InetAddress

read-create

This object identifies an IP address that an FTP, TFTP, or SFTP server uses or a host name.

Currently, the bject does not support IPv4 addresses.

1.3.6.1.4.1.2011.6.10.1.2.4.1.19

hwCfgOperateVpnInstance

DisplayString (SIZE (0..31))

read-create

This object indicates the VPN instance name that through which to transfer the file.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The following entries can be created:

  • hwCfgOperateType

  • hwCfgOperateProtocol

  • hwCfgOperateFileName

  • hwCfgOperateServerAddress

  • hwCfgOperateUserName

  • hwCfgOperateUserPassword

  • hwCfgOperateEndNotificationSwitch

  • hwCfgOperateRowStatus

  • hwCfgOperateServerPort

  • hwCfgOperateSourceAddress

  • hwCfgOperateSourceInterface

Modification Restriction

The following entries can be modified:

  • hwCfgOperateType

  • hwCfgOperateProtocol

  • hwCfgOperateFileName

  • hwCfgOperateServerAddress

  • hwCfgOperateUserName

  • hwCfgOperateUserPassword

  • hwCfgOperateEndNotificationSwitch

  • hwCfgOperateRowStatus

Deletion Restriction

The following entries can be deleted:

  • hwCfgOperateType

  • hwCfgOperateProtocol

  • hwCfgOperateFileName

  • hwCfgOperateServerAddress

  • hwCfgOperateUserName

  • hwCfgOperateUserPassword

  • hwCfgOperateEndNotificationSwitch

  • hwCfgOperateRowStatus

Access Restriction

The following entries can be read:

  • hwCfgOperateType

  • hwCfgOperateProtocol

  • hwCfgOperateFileName

  • hwCfgOperateServerAddress

  • hwCfgOperateUserName

  • hwCfgOperateUserPassword

  • hwCfgOperateEndNotificationSwitch

  • hwCfgOperateRowStatus

hwCfgOperateResultTable

The table is an operation result table that is used to save the results of operations. This table supports the GET and GET-NEXT operations. SNMPv2 and SNMPv3 support the GET, GET-NEXT, and GET-BULK operations, but do not support the SET operation.

The index of the table is hwCfgOperateResultIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.2.5.1.1

hwCfgOperateResultIndex

Integer (1..2147483647)

Not-accessible

The value of this object identifies operation result.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.2

hwCfgOperateResultOptIndex

Integer (1..2147483647)

Read-only

The value of the object identifies the operation index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.3

hwCfgOperateResultOpType

INTEGER

{

running2Startup(1),

startup2Running(2),

running2Net(3),

net2Running(4),

net2Startup(5),

startup2Net(6)

}

Read-only

The value of the object identifies the operation type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.4

hwCfgOperateState

INTEGER

{

opInProgress(1),

opSuccess(2),

opInvalidOperation(3),

opInvalidProtocol(4),

opInvalidSourceName(5),

opInvalidDestName(6),

opInvalidServerAddress(7),

opDeviceBusy(8),

opDeviceOpenError(9),

opDeviceError(10),

opDeviceNotProgrammable(11),

opDeviceFull(12),

opFileOpenError(13),

opFileTransferError(14),

opFileChecksumError(15),

opNoMemory(16),

opAuthFail(17),

opTimeOut(18),

opUnknownFailure(19),

opAbort(20),

opInvalidSourceAddress(21),

opInvalidSourceInterface(22),

opCmdExecuteFail(23)

}

Read-only

The value of the object identifies the operating status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.5

hwCfgOperateTime

TimeTicks

Read-only

The object indicates the operation time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.6

hwCfgOperateEndTime

TimeTicks

Read-only

The object indicates the time when the operation is complete.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.2.5.1.7

hwCfgOperateTransferProgress

Integer32 (1..100 | 65535)

Read-only

The value of this object identifies the file transfer progress.

If this object is set to 65535, the file size cannot be obtained when TFTP or SFTP is used to upload or download a file on the NMS. As a result, a transfer progress cannot be calculated.

1.3.6.1.4.1.2011.6.10.1.2.5.1.8

hwCfgOperateErrorReason

DisplayString (SIZE (1..255))

Read-only

This object indicates the cause of the operation failure.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The following entries can be read:

  • hwCfgOperateResultOptIndex

  • hwCfgOperateResultOpType

  • hwCfgOperateState

  • hwCfgOperateTime

  • hwCfgOperateEndTime

hwCfgBackup2ServerTable

This table is used to configure a backup server table for parameters on the remote server.

This table records the parameters about log hosts supported by the information center. The test type determines whether a parameter is mandatory or optional.

The index of this table is hwCfgBackupIndex.

OID

Node Name

Data Type

Maximum Access Permission

Description

Implementation

1.3.6.1.4.1.2011.6.10.1.3.7.1.1

hwCfgBackupIndex

Integer32 (0..4)

accessible-for-notify

Index of the backup server table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.2

hwCfgBackupServerIp

IpAddress

Read-create

IP address of the backup server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.3

hwCfgBackupProtocol

INTEGER

{

ftp(1),

tftp(2),

sftp(3)

}

Read-create

Transmission mode of the backup server.

  • ftp: FTP

  • tftp: TFTP

  • sftp: SFTP

FTP or TFTP is insecure. Therefore, configuring SFTP is recommended.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.4

hwCfgBackupUser

DisplayString (SIZE (1..64))

Read-create

Name of a user that accesses the backup server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.5

hwCfgBackupPassword

OCTET STRING (SIZE (0..392))

Read-create

Password of a user that accesses the backup server.

In the case of a plaintext password, the password length ranges from 1 to 16. In the case of a cipertext password, the password length ranges from 24 to 32.

Currently, the value range is (SIZE (0..16 | 24 | 32)).

1.3.6.1.4.1.2011.6.10.1.3.7.1.6

hwCfgBackupServerPath

DisplayString (SIZE (1..64))

Read-create

Path of the backup server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.7

hwCfgBackupRowStatus

RowStatus

Read-create

Row status of the backup server table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.10.1.3.7.1.8

hwCfgBackupResult

DisplayString (SIZE (1..64))

Read-only

Latest backup result.

This object is used to send trap information. This object cannot be viewed.

1.3.6.1.4.1.2011.6.10.1.3.7.1.9

hwCfgBackupVpnInstance

DisplayString (SIZE (0..31))

Read-create

VPN instance to which configuration files are sent.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

This table supports CreateAndGo.

When creating an entry in this table, you must specify hwCfgBackupServerIp. When the protocol is TFTP, you do not need to provide other parameters (the user name and password cannot be specified). If the protocol is FTP or SFTP, you need to provide the user name and password.

Set operations on entries in this table must comply with entry creation standards defined in SNMPv2.

Modification Restriction

None

Deletion Restriction

None

Access Restriction

None

hwCfgOperateLevelUsersTable

hwCfgOperateLevelUsersTable is used to display the user information when exclusive configuration takes effect. After exclusive configuration takes effect, only one user has the configuration rights at a time. Therefore, hwCfgOperateLevelUsersTable can display information about only one user.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.1.4.2.1.1

hwCfgOperateLevelUsersSessionID

Integer (-1..2147483647)

Read-only

This object indicates the session ID of the user.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.6.10.1.4.2.1.2

hwCfgOperateLevelUsersSessionDesc

DisplayString

Read-only

This object indicates descriptions of the user.

Currently, the value range of 1 to 128 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.3

hwCfgOperateLevelUsersName

DisplayString

Read-only

This object indicates the user name.

Currently, the value range of 1 to 253 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.4

hwCfgOperateLevelUsersLockedTime

DisplayString

Read-only

This object indicates the user's login time.

Currently, the value range of 1 to 128 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.5

hwCfgOperateLevelUsersIPAddr

DisplayString

Read-only

This object indicates the user's IP address.

Currently, the value range of 1 to 128 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.6

hwCfgOperateLevelUsersLastCfgTime

DisplayString

Read-only

This object indicates the time when a user performed the last configuration.

Currently, the value range of 1 to 64 is supported.

1.3.6.1.4.1.2011.6.10.1.4.2.1.7

hwCfgOperateLevelUsersTimeout

Integer32 (1..7200)

Read-only

Unlock without configuration seconds, 1-7200, the default is 30.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Description of Alarm Objects

hwCfgManEventlog

OID

Object Name

Binding variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.2.1

hwCfgManEventlog

  • hwCfgLogSrcCmd
  • hwCfgLogSrcData
  • hwCfgLogDesData
  • hwCfgLogTerminalUser
  • hwCfgLogCmdSrcAddress
  • hwCfgLogConfigChangeId
  • hwCfgLogTime
  • hwCfgLogCfgBaselineTime

This notification is generated when the configuration is changed.

Currently, the Binding variables supported are:
  • hwCfgLogSrcCmd
  • hwCfgLogSrcData
  • hwCfgLogDesData

hwCfgB2STransferFail

OID

Object Name

Binding variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.2.5

hwCfgB2STransferFail

  • hwCfgBackupIndex
  • hwCfgBackupServerIp
  • hwCfgBackupProtocol
  • hwCfgBackupResult

This object indicates that the configuration fails to be backed up to the server.

This object is implemented as defined in the corresponding MIB files.

hwCfgB2SOperate

OID

Object Name

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.2.6

hwCfgB2SOperate

None

This object indicates that the device starts to back up the configuration.

This object is implemented as defined in the corresponding MIB files.

hwCfgOperateCompletion

OID

Object Name

Binding variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.2.2

hwCfgOperateCompletion

  • hwCfgOperateType
  • hwCfgOperateTime
  • hwCfgOperateState
  • hwCfgOperateEndTime

This notification is sent when the configuration operation is complete.

This object is implemented as defined in the corresponding MIB files.

hwCfgRestoreFail

OID

Object Name

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.10.2.7

hwCfgRestoreFail

hwCfgRestoreErrCode

Failed to restore the system configurations.

This object is implemented as defined in the corresponding MIB file.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178290

Views: 884930

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next