No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-WLAN-CONFIGURATION-MIB

HUAWEI-WLAN-CONFIGURATION-MIB

Function Overview

This table is used to configure and query service profiles.

Root object:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiUtility(6).hwWlan(139).hwWlanConfig(11)

Relationships Between Tables

Figure 132-1  Relationships Between hwAPGroupTable, hwAPGroupWiredPortTable, hwAPGroupRadioTable, hwAPGroupVapTable, and hwWlanApTypeGroupUpdateTable

The object of hwAPGroupTable, hwAPGroupName, is the index of hwAPGroupWiredPortTable, hwAPGroupRadioTable, hwAPGroupVapTable, and hwWlanApTypeGroupUpdateTable.

Figure 132-2  Relationships Between hwAPGroupRadioTable and hwAPGroupVapTable

The object of hwAPGroupRadioTable, hwAPGrpRadioId, is the index of hwAPGroupVapTable.

Figure 132-3  Relationships Between hwAPSpecificTable, hwAPSpecificWiredPortTable, hwAPSpecificRadioTable, and hwAPSpecificVapTable

The object of hwAPSpecificTable, hwAPSpecificName, is the index of hwAPSpecificWiredPortTable, hwAPSpecificRadioTable, and hwAPSpecificVapTable.

Figure 132-4  Relationships Between hwAPSpecificRadioTable and hwAPSpecificVapTable

The object of hwAPSpecificRadioTable, hwAPSpRadio, is the index of hwAPSpecificVapTable.

Figure 132-5  Relationships Between hwAPGroupTable, hwAPGroupWiredPortTable, hwAPGroupRadioTable, and hwAPGroupVapTable

The object of hwAPGroupTable, hwAPGroupName, is the index of hwAPGroupWiredPortTable, hwAPGroupRadioTable, and hwAPGroupVapTable.

Figure 132-6  Relationships Between hwAPGroupRadioTable and hwAPGroupVapTable

The object of hwAPGroupRadioTable, hwAPGrpRadioId, is the index of hwAPGroupVapTable.

Figure 132-7  Relationships Between hwAPSpecificTable, hwAPSpecificWiredPortTable, hwAPSpecificRadioTable, and hwAPSpecificVapTable

The object of hwAPSpecificTable, hwAPSpecificName, is the index of hwAPSpecificWiredPortTable, hwAPSpecificRadioTable, and hwAPSpecificVapTable.

Figure 132-8  Relationships Between hwAPSpecificRadioTable and hwAPSpecificVapTable

The object of hwAPSpecificRadioTable, hwAPSpRadio, is the index of hwAPSpecificVapTable.

Figure 132-9  Relationships Between hwAPWiredPortProfileTable and hwAPWiredPortProfileTrafficFilterTable

The object of hwAPWiredPortProfileTable, hwAPWiredPortProfileName, is the index of hwAPWiredPortProfileTrafficFilterTable.

Figure 132-10  Relationships Between hwWlanMeshWhitelistProfileTable and hwWlanMeshWhitelistProfileConfigTable

The object of hwWlanMeshWhitelistProfileTable, hwMeshWhitelistProfileName, is the index of hwWlanMeshWhitelistProfileConfigTable.

Figure 132-11  Relationships Between hwWdsWhitelistProfileTable and hwWdsWhitelistTable

The object of hwWdsWhitelistProfileTable, hwWdsWhitelistProfileName, is the index of hwWdsWhitelistTable.

Figure 132-12  Relationships Between hwAPTrafficProfileTable and hwAPTrafficProfileFilterTable

The object of hwAPTrafficProfileTable, hwAPTrafficProfileName, is the index of hwAPTrafficProfileFilterTable.

Figure 132-13  Relationships Between hwNAIRealmProfileListTable and hwNAIRealmProfileTable

The object of hwNAIRealmProfileListTable, hwNAIRealmProfileListProfileName, is the index of hwNAIRealmProfileTable.

Description of Single Objects

hwWlanGlobalApUsername

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.1

hwWlanGlobalApUsername

OCTET STRING(4–31)

read-write

This object indicates user names for Telnet-based login to APs.

This object is implemented as defined in the corresponding MIB file.

hwWlanGlobalApPassword

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.2

hwWlanGlobalApPassword

OCTET STRING(8–32,48,68)

The password can be entered in plain or cipher text:
  • In plain text, the password is a string of 8 to 32 case-sensitive characters. It must contain at least one uppercase letter, one lowercase letter, and one digit except the question mark (?).
  • In cipher text, the password is a string of 48 or 68 characters.It must contain at least one uppercase letter, one lowercase letter, and one digit.

read-write

This object indicates passwords for Telnet-based login to APs.

This object is implemented as defined in the corresponding MIB file.

hwWlanUsernamePasswordApMac

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.3

hwWlanUsernamePasswordApMac

MacAddress

read-write

This object indicates query and setting of MAC logging in to APs.

This object is implemented as defined in the corresponding MIB file.

hwWlanGlobalApLldpSwitch

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.4

hwWlanGlobalApLldpSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the global LLDP function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

hwWlanApDataCollectionInterval

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.7

hwWlanApDataCollectionInterval

Integer32(5-60|255)

read-write

This object indicates the period of caching AP performance. The default value is 5. It is expressed in minutes.

This object is implemented as defined in the corresponding MIB file.

hwTestRtCollectOnoff

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.8

hwTestRtCollectOnoff

Integer32{Off(1),On(2)}

read-write

This object indicates the status of the real-time collection switch.

This object is implemented as defined in the corresponding MIB file.

hwTestApNormalCollectCycle

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.9

hwTestApNormalCollectCycle

Integer32(0|10-1800)

read-write

This object indicates the regular period of an AC collecting AP performance data.

This object is implemented as defined in the corresponding MIB file.

hwTestApRtCollectCycle

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.10

hwTestApRtCollectCycle

Integer32(0–30)

read-write

This object indicates the real-time period of an AC collecting AP performance data.

This object is implemented as defined in the corresponding MIB file.

hwWlanProtectIpAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.12.1

hwWlanProtectIpAddress

IpAddress

read-write

This object indicates the IP address of the standby AC.

This object is implemented as defined in the corresponding MIB file.

hwWlanProtectPriority

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.12.3

hwWlanProtectPriority

Unsigned32(0–7)

read-write

This object indicates the AC priority that determines whether the AC can be selected as the active AC. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

hwWlanProtectSwitch

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.12.4

hwWlanProtectSwitch

INTEGER{enable(1),disable(2)}

read-write

This object indicates the status of the hot backup function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

hwWlanProtectRestoreSwitch

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.12.5

hwWlanProtectRestoreSwitch

INTEGER{enable(1),disable(2)}

read-write

This object indicates the status of the switchback function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

hwUndoWlanProtectIpAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.12.6

hwUndoWlanProtectIpAddress

Integer32

read-write

This object indicates whether to restore the default setting of the IP address of the standby AC which configured dual-link HSB.

This object is implemented as defined in the corresponding MIB file.

hwUndoWlanProtectPriority

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.12.7

hwUndoWlanProtectPriority

Integer32

read-write

This object indicates whether to restore the default setting of the priority of the standby AC which configured dual-link HSB.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLELowPowerWarningThreshold

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.16

hwWlanBLELowPowerWarningThreshold

Integer32

read-write

This object indicates the low power alarm threshold for BLE devices.

This object is implemented as defined in the corresponding MIB file.

hwWlanReportStaAssocInfo

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.19

hwWlanReportStaAssocInfo

INTEGER

read-write

This object indicates whether to enable the function of recording successful STA associations.

This object is implemented as defined in the corresponding MIB file.

hwWlanStaDelayOffLineSwitch

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.23.1

hwWlanStaDelayOffLineSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable the STA offline delay function. The default value is disable(1).

This object is implemented as defined in the corresponding MIB file.

hwWlanStaDelayOffLineAgingTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.23.2

hwWlanStaDelayOffLineAgingTime

Integer32(1–86400)

read-write

This object indicates the aging time for STA offline delay. The default value is 180, in seconds.

This object is implemented as defined in the corresponding MIB file.

hwWlanStaDelayOffLineNewStaOnlineSwitch

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.23.3

hwWlanStaDelayOffLineNewStaOnlineSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to forcibly disconnect STAs in offline delay state and allow access of new STAs when the number of STAs reaches the maximum. The default value is disable(1).

This object is implemented as defined in the corresponding MIB file.

hwWlanStaDelayOffLineMaxNum

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.23.4

hwWlanStaDelayOffLineMaxNum

Integer32(1-MaxUserNum)

read-write

This object indicates the maximum number of STAs in offline delay state. The value ranges from 1 to 16384, and the default value is 3276.

This object is implemented as defined in the corresponding MIB file.

hwWlanGlobalSpectrumAnalysisSourceIPAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.24

hwWlanGlobalSpectrumAnalysisSourceIPAddress

IpAddress

read-write

This object indicates the source IPv4 address of packets sent by an AC to a spectrum server.

This object is implemented as defined in the corresponding MIB file.

hwWlanApAuthMode

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.2.1

hwWlanApAuthMode

INTEGER{mac-auth(1),sn-auth(2),no-auth(3)}

read-write

This object indicates the AP authentication mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionAddressMode

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.1

hwWlanAPProvisionAddressMode

INTEGER{static(1),dhcp(2),slaac(3),invalid(-1)}

read-write

This object indicates the IPv4 address allocation mode.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionIPv4Address

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.2

hwWlanAPProvisionIPv4Address

IpAddress

read-write

This object indicates the AP's IPv4 address.

hwWlanAPProvisionIPv4Address takes effect if hwAPIPv4Method is set to static.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionIPv4Mask

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.3

hwWlanAPProvisionIPv4Mask

IpAddress

read-write

This object indicates the AP's IPv4 mask.

hwWlanAPProvisionIPv4Mask takes effect if hwAPIPv4Method is set to static.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionIPv4Gateway

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.4

hwWlanAPProvisionIPv4Gateway

IpAddress

read-write

This object indicates the AP's IPv4 gateway.

hwWlanAPProvisionIPv4Gateway takes effect if hwAPIPv4Method is set to static.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionGroupName

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.8

hwWlanAPProvisionGroupName

OCTET STRING(0–35)

read-write

This object indicates the group name.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionName

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.9

hwWlanAPProvisionName

OCTET STRING(0–31)

read-write

This object indicates the name of an AP.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionIPv4ACList

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.10

hwWlanAPProvisionIPv4ACList

OCTET STRING

read-write

This object indicates the AC IPv4 address list.

NOTE:
  • ACL rules are separated by question marks (?).
  • A maximum of four ACL rules can be configured.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionCommitAPName

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.12

hwWlanAPProvisionCommitAPName

OCTET STRING(1–31)

read-write

This object indicates that the configuration is delivered based on AP names.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionCommitAPMac

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.13

hwWlanAPProvisionCommitAPMac

MacAddress

read-write

This object indicates that the configuration is delivered based on MAC addresses of APs.

This object is implemented as defined in the corresponding MIB file.

hwWlanAPProvisionCommitAPGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.56.14

hwWlanAPProvisionCommitAPGroup

OCTET STRING(1–35)

read-write

This object indicates that the configuration is delivered based on AP groups.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateMode

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.1

hwWlanRadioCalibrateMode

INTEGER{auto(1),manual(2),schedule(3)}

read-write

This object indicates the radio calibration mode.

The default value is auto(1).

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateScheduleTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.2

hwWlanRadioCalibrateScheduleTime

OCTET STRING

read-write

This object indicates the scheduled radio calibration time.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateManualStartup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.3

hwWlanRadioCalibrateManualStartup

Integer32

read-write

This object indicates the manually triggered radio calibration. It is valid only when the radio calibration mode is manual.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateAutoInterval

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.4

hwWlanRadioCalibrateAutoInterval

Integer32(30–1440)

read-write

This object indicates the automatic radio calibration interval.

It is expressed in minutes.

The default value is 1440.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibratePolicy

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.5

hwWlanRadioCalibratePolicy

Unsigned32

read-write

This object indicates the radio calibration policy.

  • bit0: rogue-ap
  • bit1: load
  • bit2: nonWifi
  • bit3: noise-floor

0x7 corresponds to the binary value 111, indicating that bit0, bit1, and bit2 are all 1. The three policies are therefore all enabled. The rest may be deduced by analogy.

The default value is 0, indicating that this function is not enabled.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateSensitivity

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.6

hwWlanRadioCalibrateSensitivity

INTEGER{medium(1),high(2),low(3)}

read-write

This object indicates the radio calibration sensitivity.

The default value is medium(1).

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateAutoStartTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.7

hwWlanRadioCalibrateAutoStartTime

OCTET STRING

read-write

This object indicates the start time of automatic radio calibration. The default value is 03:00:00.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateManualApGroup

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.8

hwWlanRadioCalibrateManualApGroup

OCTET STRING

read-write

This object indicates the manually triggered radio calibration based on the AP group. It is valid only when the radio calibration mode is manual.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateManualApList

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.9

hwWlanRadioCalibrateManualApList

OCTET STRING

read-write

This object indicates the manually triggered radio calibrationbased on the AP list. It is valid only when the radio calibration mode is manual.

This object is implemented as defined in the corresponding MIB file.

hwWlanRadioCalibrateManualProcess

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.57.10

hwWlanRadioCalibrateManualProcess

Integer32 (SIZE (0..100))

read-only

This object indicates the radio calibration status.

This object is implemented as defined in the corresponding MIB file.

MIBTable

hwWlanBLEMonitorListTable

This table indicates the BLE device monitoring list and is used to add a BLE device to or delete a BLE device from the BLE device monitoring list.

The index of this table is hwWlanBLEMonitoringListMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.1.17.1.1

hwWlanBLEMonitoringListMac

MacAddress

not-accessible

This object indicates the MAC address of a BLE.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.1.17.1.2

hwWlanBLEMonitoringListRowStatue

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The entries in this table can be created without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApMacWhitelistTable

This table is used to add and delete AP MAC addresses in the white lists.

The index of this table is hwWlanApMacWhitelistMacAddr.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.2.2.1.1

hwWlanApMacWhitelistMacAddr

MacAddress

not-accessible

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.2.2.1.2

hwWlanApMacWhitelistRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApSnWhitelistTable

This table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers.

The index of this table is hwWlanApSnWhitelistSn.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.2.3.1.1

hwWlanApSnWhitelistSn

OCTET STRING

not-accessible

This object indicates the serial number (SN) of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.2.3.1.2

hwWlanApSnWhitelistRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApMacBlacklistTable

This table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist.

The index of this table is hwWlanApMacBlacklistMacAddr.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.2.4.1.1

hwWlanApMacBlacklistMacAddr

MacAddress

not-accessible

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.2.4.1.2

hwWlanApMacBlacklistRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwAPGroupTable

This table is used to create or delete AP groups, and bind or unbind the AP system profile, domain profile, and WIDS profile.

The index of this table is hwAPGroupName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.3.1.1

hwAPGroupName

OCTET STRING(1–35)

not-accessible

This object indicates the AP group name. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.2

hwAPGrpAPSystemProfile

OCTET STRING(1–35)

read-write

This object indicates the system profile to which AP groups are bound. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.4

hwAPGrpDomainProfile

OCTET STRING(1–35)

read-write

This object indicates the domain profile to which AP groups are bound. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.5

hwAPGrpRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.6

hwAPGrpWidsProfile

OCTET STRING(1–35)

read-write

This object indicates the WIDS profile to which AP groups are bound.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.7

hwAPGrpBleProfile

OCTET STRING(0–35)

read-write

This object indicates the BLE profile to which AP groups are bound.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.8

hwAPGrpUUIDString

OCTET STRING(0–16)

read-write

This object indicates the UUID field in a string of characters in BLE broadcast frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.3.1.9

hwAPGrpUUIDHex

OCTET STRING(0–32)

read-write

This object indicates the UUID field in hexadecimal notation in BLE broadcast frames.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

AP groups are created using the hwAPGrpRowStatus object independently.

hwAPGrpRowStatus is bound to hwAPGrpAPSystemProfile, hwAPGrpDomainProfile, hwAPGrpWidsProfile and hwAPGrpBleProfile to bind the AP system profile, domain profile, WIDS profile and BLE profile.

The value of hwAPGrpRowStatus is createAndGo.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

AP groups are deleted using the hwAPGrpRowStatus object independently.

hwAPGrpRowStatus is bound to hwAPGrpAPSystemProfile, hwAPGrpDomainProfile, hwAPGrpWidsProfile and hwAPGrpBleProfile to unbind the AP system profile, domain profile, WIDS profile and BLE profile.

The value of hwAPGrpRowStatus is destroy.

Access Restriction

The entries in this table can be read without restriction.

hwAPGroupWiredPortTable

This table is the AP wired port profile table. This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group.

Indexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.4.1.1

hwAPGrpWPInterfaceType

INTEGER{ethernet(1),gigabitethernet(2),eth-trunk(3),multige(4)}

not-accessible

This object indicates the interface type. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.4.1.2

hwAPGrpWPInterfaceNum

Unsigned32(0–27)

not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.4.1.3

hwAPGrpWPProfile

OCTET STRING(1–35)

read-write

This object indicates the bound wired port profile.

The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.4.1.4

hwAPGrpWPRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

To create entries in this table, specify hwAPGroupName, hwAPGrpWPInterfaceType, hwAPGrpWPInterfaceNum, hwAPGrpWPRowStatus, and hwAPGrpWPProfile. hwAPGrpWPInterfaceType and hwAPGrpWPInterfaceNum specify the type and number of the interface to be bound. hwAPGrpWPProfile specifies name of the wired port profile to be bound. The value createAndGo(4) of hwAPGrpWPRowStatus indicates to bind the profile.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

To delete entries in this table, specify hwAPGroupName, hwAPGrpWPInterfaceType, hwAPGrpWPInterfaceNum, hwAPGrpWPRowStatus, and hwAPGrpWPProfil. hwAPGrpWPInterfaceType and hwAPGrpWPInterfaceNum specify the type and number of the interface to be unbound. hwAPGrpWPProfile specifies the name of the wired port profile to be unbound. The value destroy(6) of hwAPGrpWPRowStatus indicates to unbind the profile.

Access Restriction

The entries in this table can be read without restriction.

hwAPGroupRadioTable

This table records information about profiles bound to a radio in an AP group, including the 5G radio profile, Mesh profile, WDS profile, location profile, and spectrum profile.

Indexes of this table are hwAPGroupName and hwAPGrpRadioId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.5.1.1

hwAPGrpRadioId

Unsigned32(0–2)

Only the AP4030TN, AP4051TN, and AP8050TN-HD supports three radios.

not-accessible

This object indicates the radio ID. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.2

hwAPGrpRadio5gProfile

OCTET STRING(1–35)

read-write

This object indicates the bound 5G radio profile.

The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.3

hwAPGrpMeshProfile

OCTET STRING(1–35)

read-write

This object indicates the bound Mesh profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.4

hwAPGrpWdsProfile

OCTET STRING(1–35)

read-write

This object indicates the bound WDS profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.6

hwAPGrpLocationProfile

OCTET STRING(1–35)

read-write

This object indicates the bound location profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.8

hwAPGrpRadioRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.10

hwAPGrpMeshWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound Mesh whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.11

hwAPGrpWdsWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound WDS whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.12

hwAPGrpRadioSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the radio switch. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.13

hwAPGrpRadioChannel

Unsigned32

read-write

This object indicates a radio channel.

The 2.4 GHz radio supports 13 channels from channels 1 to 13. The 5 GHz radio supports channels 36-64, 100-140, 149-165, and 184-196, and the value is an integer multiple of 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.14

hwAPGrpRadioBandwidth

INTEGER{ht20(1),ht40Plus(2),ht40Minus(3),ht80(4),invalid(255)}

read-write

This object indicates a bandwidth. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.15

hwAPGrpRadioEirp

Unsigned32(1–127)

read-write

This object indicates the power level of a radio. The default value is 127.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.16

hwAPGrpRadioAntennaGain

Unsigned32(0xFFFFFFFF|0–30)

read-write

This object indicates antenna gains. The default value 0xFFFFFFFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.17

hwAPGrpRadioCoverageDistance

Unsigned32(1–400)

read-write

This object indicates the radio coverage distance. The unit is 0.1 km.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.18

hwAPGrpRadioWorkMode

INTEGER{normal(1),monitor(2)}

read-write

This object indicates the working mode of AP group radios.
  • normal(1): The AP group radios work in normal mode.
  • monitor(2): The AP group radios work in monitor mode.
The default value is normal(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.19

hwAPGrpRadioFrequency

INTEGER{frequency2G(1),frequency5G(2)}

read-write

This object indicates the setting of the frequency band for radio 0 and radio 2. The default value is invalid.

  • 1: frequency2G
  • 2: frequency5G

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.20

hwAPGrpSpectrumAnalysisSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether spectrum analysis is enabled on AP group radios. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.21

hwAPGrpWidsDeviceDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the device detection function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.22

hwAPGrpWidsAttackDetectEnBmp

Unsigned32

read-write

This object indicates the bitmap of the attack detection function.

  • bit0: weak-iv
  • bit1: spoof
  • bit2: flood
  • bit3: wpa-psk
  • bit4: wpa2-psk
  • bit5: wapi-psk
  • bit6: wep-psk

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.23

hwAPGrpWidsRogueContainSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether rogue device containment is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.24

hwAPGrpRadioSecondChannel

Unsigned32

read-write

This object indicates a second radio-frequency channel. The value can be 42, 58, 106, 122, 138, or 155.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.27

hwAPGrpSfnRoamCtsSwitch INTEGER{disable(1),enable(2)}

read-write

This object indicates whether RUs are enabled to respond to STAs with CTS packets. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.28

hwAPGrpSfnRoamBeaconSwitch INTEGER{disable(1),enable(2)}

read-write

This object indicates whether RUs are enabled to send Beacon frames. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.5.1.29

hwAPGrpSfnRoamCtsDelay Integer32(0–255)

read-write

This object indicates the delay time after which RUs respond to STAs with CTS packets. It is expressed in milliseconds.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When creating entries in this table, you must specify hwAPGroupName, hwAPGrpRadioId, and hwAPGrpRadioRowStatus as well as any one read-write object in the table. The value createAndGo(4) of hwAPGrpWPRowStatus indicates that entries can be created.

Modification Restriction

hwAPGrpRadioChannel and hwAPGrpRadioBandwidth must be specified simultaneously.

Deletion Restriction

hwAPGrpRadio5gProfile and hwAPGrpRadio2gProfile have default profiles and cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwAPGroupVapTable

This table is used to create VAPs in an AP group.

Indexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.6.1.1

hwAPGrpWlanId

Unsigned32(1–16)

not-accessible

This object indicates the WLAN ID. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.6.1.2

hwAPGrpVapProfile

OCTET STRING(1–35)

read-write

This object indicates the bound VAP profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.6.1.3

hwAPGrpVapRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.6.1.4

hwAPGrpVapServiceVlan

Unsigned32(0–4094)

read-write

This object indicates the VLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.6.1.5

hwAPGrpVapVlanPool

OCTET STRING(0–31)

read-write

This object indicates the VLAN pool name.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only when hwAPGroupTable exists. hwAPGrpVapProfile and hwAPGrpVapRowStatus must be configured at the same time.

hwAPGrpVapServiceVlan and hwAPGrpVapVlanPool cannot be configured at the same time.

Modification Restriction

hwAPGrpVapServiceVlan and hwAPGrpVapVlanPool cannot be modified at the same time.

Deletion Restriction

The entries in this table can be deleted only when hwAPGrpVapRowStatus is set to destroy(6).

Access Restriction

The entries in this table can be read only when hwAPGroupTable exists.

hwAPSpecificTable

This table is used to add or delete an AP and bind an AP system profile, WIDS profile, or domain profile to it or unbind an AP system profile, WIDS profile, or domain profile from it.

The index of this table is hwAPSpApMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.7.1.2

hwAPSpAPSystemProfile

OCTET STRING(1–35)

read-write

This object indicates the system profile bound to the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.4

hwAPSpDomainProfile

OCTET STRING(1–35)

read-write

This object indicates the domain profile bound to the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.5

hwAPSpRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.6

hwAPSpApMac

MacAddress

not-accessible

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.7

hwAPSpApId

Unsigned32

read-write

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.8

hwAPSpApTypeInfo

OCTET STRING(0–35)

read-write

This object indicates the AP type information.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.9

hwAPSpWidsProfile

OCTET STRING(0–35)

read-write

This object indicates the bound WIDS profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.10

hwAPSpBleProfile

OCTET STRING(0–35)

read-write

This object indicates the bound BLE profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.11

hwAPSpLongitude

OCTET STRING(0–15)

read-write

This object indicates the longitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.12

hwAPSpLatitude

OCTET STRING(0–14)

read-write

This object indicates the latitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.13

hwAPSpApAddressMode

INTEGER{invalid(-1),static(1),dhcp(2),slaac(3)}

read-write

This object indicates the AP address mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.14

hwAPSpApIPv4Address

IpAddress

read-write

This object indicates the AP's IPv4 address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.15

hwAPSpApIPv4Mask

IpAddress

read-write

This object indicates the IPv4 address mask of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.16

hwAPSpApIPv4Gateway

IpAddress

read-write

This object indicates the AP's IPv4 gateway address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.20

hwAPSpIPv4ACList

OCTET STRING

read-write

This object indicates the AC's IPv4 address list.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.22

hwAPSpGroupName

OCTET STRING(0-35)

read-write

This object indicates the AP group name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.7.1.23

hwAPSpApName

OCTET STRING(0-31)

read-write

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

To create entries in this table, you must specify hwAPSpApMac and hwAPSpRowStatus. The value createAndGo(4) of hwAPSpRowStatus indicates that entries can be created.

hwAPSpRowStatus is bound to hwAPSpAPSystemProfile, hwAPSpWidsProfile, hwAPSpDomainProfile, and hwAPSpBleProfile to bind the AP system profile, WIDS profile, domain profile, and BLE profile.

Modification Restriction

Ensure that the hwAPSpApAddressMode value is set to static(1) when configuring the values of hwAPSpApIPv4Address, hwAPSpApIPv4Mask, and hwAPSpApIPv4Gateway. Otherwise, the configuration fails.

hwAPSpApIPv4Address and hwAPSpApIPv4Mask must be configured at the same time. hwAPSpApIPv4Gateway must be configured with hwAPSpApIPv4Address and hwAPSpApIPv4Mask.

Deletion Restriction

To delete entries in this table, you must specify hwAPSpApMac and hwAPSpRowStatus. The value destroy(6) of hwAPSpRowStatus indicates that entries can be deleted.

hwAPSpRowStatus is bound to hwAPSpAPSystemProfile, hwAPSpWidsProfile, hwAPSpDomainProfile, and hwAPSpBleProfile to unbind the AP system profile, WIDS profile, domain profile, and BLE profile.

Access Restriction

The values of hwAPSpApId and hwAPSpApTypeInfo can be read only when the AP exists.

The objects mapping profiles can be read only after the profiles are bound to the AP view.

hwAPSpecificWiredPortTable

This table is used to bind an AP wired port profile to an AP or unbind an AP wired port profile from an AP.

Indexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum, and hwAPSpApMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.8.1.1

hwAPSpWPInterfaceType

INTEGER{fe(1),ge(2),trunk(3),multige(4)}

not-accessible

This object indicates the interface type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.8.1.2

hwAPSpWPInterfaceNum

Unsigned32(0–27)

not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.8.1.3

hwAPSpWPProfile

OCTET STRING(1–35)

read-write

This object indicates the bound wired port profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.8.1.4

hwAPSpWPRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.8.1.5

hwAPSpWPApId

Unsigned32

read-only

AP ID.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When creating an entry in this table, specify the hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum, and hwAPSpApMac indexes, as well as the hwAPSpWPRowStatus and hwAPSpWPProfile nodes. hwAPSpWPInterfaceType and hwAPSpWPInterfaceNum indicate the type and index of the interface to be bound. hwAPSpWPProfile indicates the name of the wired port profile to be bound. You can bind this table to an AP when the hwAPSpWPRowStatus value is createAndGo(4).

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

When deleting an entry in this table, specify the hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum, and hwAPSpApMac indexes, as well as the hwAPSpWPRowStatus and hwAPSpWPProfile nodes. hwAPSpWPInterfaceType and hwAPSpWPInterfaceNum indicate the type and index of the interface to be unbound. hwAPSpWPProfile indicates the name of the wired port profile to be unbound. You can unbind this table from an AP when the hwAPSpWPRowStatus value is destroy (6).

Access Restriction

The entries in this table can be read only when the corresponding AP exists.

hwAPSpecificRadioTable

This table records information about profiles bound to a radio in an AP group, including the 5G radio profile, Mesh profile, WDS profile, location profile, and spectrum profile.

Indexes of this table are hwAPSpApMac and hwAPSpRadio.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.9.1.1

hwAPSpRadio

Unsigned32(0–2)

Only the AP4030TN, AP4051TN, and AP8050TN-HD supports three radios.

not-accessible

This object indicates the radio ID. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.2

hwAPSp5gRadioProfile

OCTET STRING(1–35)

read-write

This object indicates the bound 5G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.3

hwAPSpMeshProfile

OCTET STRING(1–35)

read-write

This object indicates the bound Mesh profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.4

hwAPSpWdsProfile

OCTET STRING(1–35)

read-write

This object indicates the bound WDS profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.6

hwAPSpLocationProfile

OCTET STRING(1–35)

read-write

This object indicates the bound location profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.8

hwAPSpRadioRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.9

hwAPSpRadio2gProfile

OCTET STRING(0–35)

read-write

This object indicates the bound 2G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.10

hwAPSpMeshWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound Mesh whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.11

hwAPSpWdsWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound WDS whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.12

hwAPSpRadioSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the radio switch. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.13

hwAPSpRadioChannel

Unsigned32

read-write

This object indicates a radio channel.

The 2.4 GHz radio supports 13 channels from channels 1 to 13. The 5 GHz radio supports channels 36-64, 100-140, 149-165, and 184-196, and the value is an integer multiple of 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.14

hwAPSpRadioBandwidth

INTEGER{ht20(1),ht40Plus(2),ht40Minus(3)}

read-write

This object indicates a bandwidth. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.15

hwAPSpRadioEirp

Unsigned32(0–30)

read-write

This object indicates the power level. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.16

hwAPSpRadioAntennaGain

Unsigned32(0xFFFFFFFF|0–30)

read-write

This object indicates antenna gains. The default value 0xFFFFFFFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.17

hwAPSpRadioCoverageDistance

Unsigned32(1–400|65535)

read-write

This object indicates the radio coverage distance. The unit is 0.1 km.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.18

hwAPSpRadioWorkMode

INTEGER{normal(1),monitor(2)}

read-write

This object indicates the radio working mode.
  • normal(1): The radio works in normal mode.
  • monitor(2): The radio works in monitor mode.
The default value is normal(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.19

hwAPSpRadioFrequency

INTEGER{frequency2G(1),frequency5G(2)}

read-write

This object indicates the setting of the frequency band for radio 0 and radio 2. The default value is invalid.

  • 1: frequency2G
  • 2: frequency5G

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.20

hwAPSpSpectrumAnalysisSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether spectrum analysis is enabled.
  • disable (1): Spectrum analysis is disabled.
  • enable(2): Spectrum analysis is enabled.
The default value is disable(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.21

hwAPSpWidsDeviceDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether device detection is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.22

hwAPSpWidsAttackDetectEnBmp

Unsigned32

read-write

This object indicates the bitmap of the attack detection function.

  • bit0: weak-iv
  • bit1: spoof
  • bit2: flood
  • bit3: wpa-psk
  • bit4: wpa2-psk
  • bit5: wapi-psk
  • bit6: wep-psk

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.23

hwAPSpWidsRogueContainSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether rogue device containment is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.24

hwAPSpRadioApId

Unsigned32

read-only

AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.25

hwAPSpRadioSecondChannel

Unsigned32

read-write

This object indicates a second radio-frequency channel. The value can be 42, 58, 106, 122, 138, or 155.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.26

hwAPSpAutoChannelSelectSwitch

INTEGER{disable(1),invalid(255)}

read-write This object indicates the status of the automatic channel selection function. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.27

hwAPSpAutoTxPowerSelectSwitch

INTEGER{disable(1),invalid(255)}

read-write This object indicates the status of the automatic power selection function. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.28

hwAPSpSfnRoamCtsSwitch

INTEGER{disable(1),invalid(255)}

read-write

This object indicates whether RUs are enabled to respond to STAs with CTS packets. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.29

hwAPSpSfnRoamBeaconSwitch

INTEGER{disable(1),invalid(255)}

read-write

This object indicates whether RUs are enabled to send Beacon frames. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.30

hwAPSpSfnRoamCtsDelay Integer32(0–255)

read-write

This object indicates the delay time after which RUs respond to STAs with CTS packets. It is expressed in milliseconds.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The prerequisite is that the corresponding AP already exists.

Modification Restriction

Modifications to the entries in this table take effect only when hwAPSpRadioChannel and hwAPSpRadioBandwidth are configured at the same time.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwAPSpecificVapTable

This table is used to create VAPs in an AP.

Indexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.10.1.1

hwAPSpWlan

Unsigned32(1–16)

not-accessible

This object indicates the WLAN ID. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.10.1.2

hwAPSpVapProfile

OCTET STRING(1–35)

read-write

This object indicates the bound VAP profile.

When a VAP profile is bound, hwAPSpVapProfile and hwAPSpVapRowStatus must be simultaneously configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.10.1.3

hwAPSpVapRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.10.1.4

hwAPSpVapApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.10.1.5

hwAPSpVapServiceVlan

Unsigned32(0–4094)

read-write

This object indicates the VLAN ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.10.1.6

hwAPSpVapVlanPool

OCTET STRING(0–31)

read-write

This object indicates the VLAN pool name.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only when hwAPSpecificTable exists.

hwAPSpVapServiceVlan and hwAPSpVapVlanPool cannot be configured at the same time.

Modification Restriction

hwAPSpVapServiceVlan and hwAPSpVapVlanPool cannot be modified at the same time.

Deletion Restriction

The entries in this table can be deleted only when hwAPSpVapRowStatus is set to destroy(6). To delete entries in this table, configure hwAPSpVapProfile and hwAPSpVapRowStatus at the same time.

Access Restriction

The entries in this table can be read only when hwAPSpecificTable exists.

hwRegulatoryDomainProfileTable

This table is used to configure country codes, calibration channels, and calibration channel bandwidths.

The index of this table is hwRegulatoryDomainProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.11.1.1

hwRegulatoryDomainProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a regulatory domain profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.2

hwCountryCode

OCTET STRING(2–8)

read-write

This object indicates the country code. Its value range is subject to the country code table. The default value is CN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.3

hwDcaChannel5GBandwidth

INTEGER(1–3)

read-write

This object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 1.

  • 1: bw20 MHz
  • 2: bw40 MHz
  • 3: bw80 MHz

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.4

hwDcaChannel5GChannelSet

OCTET STRING(1–256)

read-write

This object indicates the calibration channel set on the 5 GHz frequency band.

The default value is 149, 153, 157, 161, or 165.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.5

hwDcaChannel2GChannelSet

OCTET STRING(1–256)

read-write

This object indicates the calibration channel set on the 2 GHz frequency band.

The default value is 1, 6, and 11.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.6

hwRegulatoryDomainProfilRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.7

hwWlanWideBandEnable INTEGER read-write

This object indicates whether the wideband function, that is, the 4.9 GHz frequency band, of the regulatory domain profile is enabled.

The value can be:
  • 1: disable
  • 2: enable
The default value is 1.
NOTE:
Before using the 4.9 GHz frequency band, ensure that you have obtained the 4.9 GHz license from the local administrative department and use the band properly.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.11.1.8

hwApProfChannelLoadMode

INTEGER{indoor(1),outdoor(2)} read-write

This object indicates the channel mode of the outdoor AP.

The value can be:
  • 1: indoor mode
  • 2: outdoor mode (original)
The default value is 2.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When creating an entry in this table, specify hwRegulatoryDomainProfileName and hwRegulatoryDomainProfilRowStatus. You can create entries in this table when the hwRegulatoryDomainProfilRowStatus value is createAndGo(4).

Modification Restriction

Calibration channel sets and calibration channel bandwidths must be supported by corresponding country codes.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwApSystemProfileTable

This table is used to create or delete an AP system profile and configure AP attributes.

The index of this table is hwApSystemProfName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.12.1.1

hwApSystemProfName

OCTET STRING(1–35)

not-accessible

This object indicates the name of an AP system profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.4

hwApProfSampleTime

Unsigned32(2–300)

read-write

This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.5

hwApProfLedSwitch

INTEGER{off(1),on(2)}

read-write

This object indicates whether to enable the AP's LED indicator. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.7

hwApProfMtu

Unsigned32(1500–1700)

read-write

This object indicates the MTU of the management VLANIF on an AP. The default value is 1500.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.8

hwApProfMeshRole

INTEGER{mp(1),mpp(2)}

read-write

This object indicates a Mesh role. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.9

hwApProfTemporaryManagement

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the AP-based offline VAP switch. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.10

hwApProfManagementVlan

Unsigned32(1–4094|0xFFFFFFFF)

read-write

This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.11

hwApProfHighTempThreshold

Unsigned32(20–110|0xFFFFFFFF)

read-write

This object indicates the high temperature alarm threshold of an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP.

NOTE:
System thresholds vary with different AP types. For details, see AP device information.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.12

hwApProfLowTempThreshold

Integer32(-70–10|0xFFFF)

read-write

This object indicates the low temperature alarm threshold of an AP. The default value 0xFFFF indicates the system threshold of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.17

hwApProfMemoryUsageThreshold

Unsigned32(30–100)

read-write

This object indicates the memory usage alarm threshold of an AP. The default value is 80, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.18

hwApProfCpuUsageThreshold

Unsigned32(50–100)

read-write

This object indicates the CPU usage alarm threshold of an AP. The default value is 90, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.19

hwApProfTelnetSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable Telnet. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.20

hwApProfSTelnetSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable SSH. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.21

hwApProfConsoleSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable the console. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.22

hwApProfLogRecordLevel

INTEGER{emergency(1),alert(2),critical(3),error(4),warning(5),notice(6),info(7),debug(8)}

read-write

This object indicates the log backup level. The default value is 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.23

hwApProfLogServerIp

IpAddress

read-write

This object indicates the IP address of the log server.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.25

hwApProfAlarmRestrictionSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the alarm suppression switch. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.26

hwApProfAlarmRestrictionPeriod

Unsigned32(10–300)

read-write

This object indicates the alarm suppression period. The default value is 60, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.27

hwApProfKeepServiceSwitch

INTEGER{enable(1),disable(2),allowaccess(3),allowAccessAlsoNoauth(4)}

read-write

This object indicates whether to enable the offline service retaining function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.28

hwApProfProtectPriority

Unsigned32(0–7|0xFFFFFFFF)

read-write

This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.29

hwApProfProtectACIp

IpAddress

read-write

This object indicates the IP address of the standby AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.31

hwApProfEapStartMode

INTEGER{broadcast(1),multicast(2),unicast(3)}

read-write

This object indicates the EAP Start packet conversion mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.32

hwApProfEapStartTransform

INTEGER{equalBssid(1),always(2)}

read-write

This object indicates the EAP Start packet conversion mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.33

hwApProfEapStartUnicastMac

MacAddress

read-write

This object indicates that EAP Start packets are converted to those with specific MAC addresses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.34

hwApProfEapResponseMode

INTEGER{broadcast(1),multicast(2),specific(3),learning(4)}

read-write

This object indicates the EAP Response packet conversion mode. The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.35

hwApProfEapResponseTransform

INTEGER{equalBssid(1),always(2)}

read-write

This object indicates the EAP Response packet conversion mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.36

hwApProfEapResponseUnicastMac

MacAddress

read-write

This object indicates that EAP Response packets are converted to those with specific MAC addresses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.37

hwApProfLldpRestartDelay

Unsigned32(1–10)

read-write

This object indicates the delay for re-enabling LLDP. The default value is 2, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.38

hwApProfLldpAdminStatus

INTEGER{txrx(1),rx(2),tx(3)}

read-write

This object indicates the operation mode of LLDP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.39

hwApProfLldpRetransDelay

Unsigned32(1–8192)

read-write

This object indicates the message retransmitting delay. The default value is 2, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.40

hwApProfLldpRetransHoldMultiplier

Unsigned32(2–10)

read-write

This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.41

hwApProfLldpInterval

Unsigned32(5–32768)

read-write

This object indicates the interval at which LLDP packets are sent. The default value is 30, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.42

hwApProfLldpReportInterval

Unsigned32(5–3600)

read-write

This object indicates the interval at which LLDP packets are reported. The default value is 30, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.43

hwApProfStaAccessMode

INTEGER{unknown(-1),disable(1),blacklist(2),whitelist(3)}

read-write

This object indicates the access mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.44

hwApProfStaAccessModeProfile

OCTET STRING(0–35)

read-write

This object indicates blacklist and whitelist profiles.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.45

hwApProfRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.46

hwApProfSFTPSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable the SFTP. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.47

hwApProfDynamicBlackListAgingTime

Unsigned32(180–3600)

read-write

This object indicates the aging time of the dynamic blacklist entries. The default value is 600, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.48

hwApProfAntennaOutputMode

INTEGER{combine(1), split(2)}

read-write

This object indicates the output mode of a 2.4 GHz or 5 GHz antenna. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.49

hwApProfMppActiveReselectionSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether active MPP reselection is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.50

hwApProfSpectrumServerIPAddress IpAddress read-write

This object indicates the IPv4 address of the spectrum analysis server. By default, the IPv4 address 255.255.255.255 is used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.52

hwApProfSpectrumServerPort Unsigned32 (0,5000–65535) read-write

This object indicates the port of the spectrum analysis server. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.53

hwApProfSpectrumViaACSwitch INTEGER{disable(1),enable(2)} read-write

This object indicates the status of the spectrum analysis function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.54

hwApProfSpectrumViaACPort Unsigned32 (0,5000–65535) read-write

This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.55

hwApProfSpectrumNonWifiDeviceAgingTime Unsigned32 (1–30) read-write

This object indicates the aging time of non-WLAN devices on the AC. The default value is 3, in minutes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.56

hwApProfPoeMaxPower

Unsigned32(15400–380000)

read-write

This object indicates the maximum output power of the central AP.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.57

hwApProfPoePowerReserved

Unsigned32(0–100|255)

read-write

This object indicates the percentage of the reserved PoE power against the total PoE power on the central AP. The default value is 255.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.58

hwApProfPoePowerThreshold

Unsigned32(0–100|255)

read-write

This object indicates the alarm threshold of PoE power consumption percentage on the central AP. The default value is 255.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.59

hwApProfPoeAfInrushSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the IEEE 802.3at-compliant central AP is enabled to provide power in accordance with IEEE 802.3af. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.60

hwApProfPoeHighInrushSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the central AP is enabled to allow high inrush current during power-on. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.61

hwApProfPrimaryLinkIPv4

IpAddress

read-write

This object indicates the IPv4 address of the primary AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.63

hwApProfBackupLinkIPv4

IpAddress

read-write

This object indicates the IPv4 address of the standby AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.65

hwApProfLedOffTimeRange

OCTET STRING

read-write

This object indicates that the RU indicators are turned off in a specified period.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.66

hwApProfUsbSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable USB. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.77

hwApProfTemporaryManagementPsk

OCTET STRING(6|8–108)

read-write

This object indicates the password for logging in to the offline management VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.78

hwApProfProtectLinkSwitchMode Unsigned32{priority(1)|network-stabilization(2)}

read-write

This object indicates the active/standby link switchover mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.79

hwApProfProtectLinkSwitchEchoProbeTime Unsigned32

read-write

This object indicates the number of Echo probe packets sent within a statistics collection interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.80

hwApProfProtectLinkSwitchStartThreshold Unsigned32

read-write

This object indicates the packet loss rate start threshold for an active/standby link switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.81

hwApProfProtectLinkSwitchGapThreshold Unsigned32

read-write

This object indicates the packet loss rate difference threshold for an active/standby link switchover.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.82 hwApProfCardConnectType INTEGER{serial(1),ethernet(2)}

read-write

This object indicates the connection type between an IoT card and an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.12.1.83 hwApProfLldpReportEnable

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether an AP is enabled to report information about its LLDP neighbors.

The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When creating an entry in this table, specify hwApSystemProfName and hwApProfRowStatus. You can create entries in this table when the hwApProfRowStatus value is createAndGo(4).

Modification Restriction

hwApProfEapStartMode and hwApProfEapStartUnicastMac must be configured at the same time. hwApProfEapResponseMode and hwApProfEapResponseUnicastMac must be configured at the same time. When the hwApProfStaAccessMode value is enable, the hwApProfStaAccessModeProfile value must be configured at the same time. hwApProfSpectrumViaACPort and hwApProfSpectrumViaACSwitch must be configured at the same time. hwApProfSpectrumServerIPAddress (or hwApProfSpectrumServerIPv6Address) and hwApProfSpectrumServerPort must be configured at the same time.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwAPWiredPortProfileTable

This table is used to create or delete an AP wired port profile and modify or query attributes.

The index of this table is hwAPWiredPortProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.13.1.1

hwAPWiredPortProfileName

OCTET STRING(1..35)

not-accessible

This object indicates the name of an AP wired port profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.2

hwAPWiredPortPortLinkProfileName

OCTET STRING(1..35)

read-write

This object indicates the bound AP wired port link profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.3

hwAPWiredPortProfilePortDesc

OCTET STRING(0..31)

read-write

This object indicates the description of an interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.4

hwAPWiredPortProfilePortEthTrunkID

Unsigned32(0,255)

read-write

This object indicates the ID of a Trunk. 0 is valid and 255 is invalid. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.5

hwAPWiredPortProfilePortSTPSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable STP on wired ports. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.6

hwAPWiredPortProfilePortMode

INTEGER{root(1),endpoint(2),middle(3),null(256)}

read-write

This object indicates the mode of the wired port. The default value is 256.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.7

hwAPWiredPortProfilePortVlanPvid

Unsigned32(0..4094)

read-write

This object indicates the PVID of a port. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.8

hwAPWiredPortProfilePortVlanTagged

OCTET STRING(0..1024)

read-write

This object indicates whether to tag ports with VLAN IDs. The default value is 0.

If VLAN tags are set to 1, 3, and 10, the first, third, and tenth bits of the 4096 bits from the right are changed to 1, that is, 1000000101. The value 1000000101 is 0205 in hexadecimal notation.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.9

hwAPWiredPortProfilePortVlanUntagged

OCTET STRING(0..1024)

read-write

This object indicates whether to untag VLAN IDS from ports. The default value is 1.

The calculation method is the same as the method for calculating hwAPWiredPortProfilePortVlanTagged.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.10

hwAPWiredPortProfileUserIsolate

INTEGER{disable(1),l3Isolate(2),l2Isolate(3)}

read-write

This object indicates the status of the user isolation function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.11

hwAPWiredPortProfileDhcpTrust

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether a port is configured as a DHCP trusted port. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.13

hwAPWiredPortProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.14

hwAPWiredPortProfileLearnAddress

INTEGER{disable(1),enable(2)}

read-write

This object indicates the IPv4 address learning function of the wired port profile. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.15

hwAPWiredPortProfileIpBindCheck

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether IP source guard (IPSG) is enabled on the downlink wired port of a wall plate AP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.16

hwAPWiredPortProfileArpBindCheck

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether dynamic ARP inspection (DAI) is enabled on the downlink wired port of a wall plate AP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.17

hwAPWiredPortProfileSTPAutoShutdown

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the STP-triggered port shutdown function is enabled on the downlink wired port of a wall plate AP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.18

hwAPWiredPortProfileSTPAutoShutdownRecoveryTime

INTEGER (600..3600)

read-write

This object indicates the auto-recovery interval for an AP's wired port on which the STP-triggered port shutdown function is enabled. The default value is 600, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.19

hwAPWiredPortProfileTrafficOptimizeSuppressionBc

INTEGER (0..1488100)

read-write

This object indicates the maximum volume of broadcast traffic allowed on an AP's wired port. The default value is 0xFFFFFFFF, in pps.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.20

hwAPWiredPortProfileTrafficOptimizeSuppressionUc

INTEGER (0..1488100)

read-write

This object indicates the maximum volume of unknown unicast traffic allowed on an AP's wired port. The default value is 0xFFFFFFFF, in pps.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.13.1.21

hwAPWiredPortProfileTrafficOptimizeSuppressionMc

INTEGER (0..1488100)

read-write

This object indicates the maximum volume of multicast traffic allowed on an AP's wired port. The default value is 0xFFFFFFFF, in pps.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

To create entries in this table, specify hwAPWiredPortProfileName and hwAPWiredPortProfileRowStatus. The value createAndGo(4) of hwAPWiredPortProfileRowStatus indicates to create entries.

Modification Restriction

  • hwAPWiredPortProfileRowStatus is configured independently to create or delete wired port profiles.
  • hwAPWiredPortProfileRowStatus and hwAPWiredPortPortLinkProfileName are configured together to bind or unbind wired port profiles.
  • When configuring the following objects, ensure that hwAPWiredPortProfilePortEthTrunkID is not set to 0, that is, ports are not added to an Eth-Trunk:
    • hwAPWiredPortProfileDhcpTrust
    • hwAPWiredPortProfileNdTrust
    • hwAPWiredPortProfilePortMode
    • hwAPWiredPortProfilePortVlanPvid
    • hwAPWiredPortProfilePortVlanTagged
    • hwAPWiredPortProfilePortVlanUntagged
    • hwAPWiredPortProfileUserIsolate
    • hwAPWiredPortProfilePortSTPSwitch

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwAPWiredPortProfileTrafficFilterTable

This table is used to configure ACL-based packet filtering in an AP wired port profile.

Indexes of this table are hwAPWiredPortProfileName, hwAPWiredPortProfileTrafficFilterType, and hwAPWiredPortProfileTrafficFilterDirection.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.14.1.1

hwAPWiredPortProfileTrafficFilterDirection

INTEGER{inbound(1),outbound(2)}

not-accessible

This object indicates the direction of the ACL-based packet filtering.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.14.1.2

hwAPWiredPortProfileTrafficFilterType

INTEGER{ipv4(1)}

not-accessible

This object indicates the type of the ACL-based packet filtering.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.14.1.3

hwAPWiredPortProfileTrafficFilterAclID

Integer32(3000–3031)

read-write

This object indicates ACL rules for packet filtering.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.14.1.4

hwAPWiredPortProfileTrafficFilterRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

To create entries in this table, specify hwAPWiredPortProfileName, hwAPWiredPortProfileTrafficFilterType, hwAPWiredPortProfileTrafficFilterDirection, and hwAPWiredPortProfileTrafficFilterRowStatus, and ensure that hwAPWiredPortProfileTrafficFilterRowStatus is set to createAndGo(4).

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table cannot be deleted without restriction.

Access Restriction

The entries in this table can be read only when ACL is configured in the wired port profile.

hwAPPortLinkProfileTable

This table is used to create or delete an AP wired port link profile and configure parameters.

The index of this table is hwAPPortLinkProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.15.1.1

hwAPPortLinkProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of an AP wired port link profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.2

hwAPPortLinkProfileLldpEnable

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the LLDP function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.3

hwAPPortLinkProfileLldpTlvType

Unsigned32(0–31)

read-write

This object indicates the types of TLVs that can be advertised from an AP's wired port. The default value is 31.

  • 0: invalid
  • bit0: management-address
  • bit1: port-description
  • bit2: system-capability
  • bit3: system-description
  • bit4: system-name

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.4

hwAPPortLinkProfileCrcAlarmEnable

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the CRC error alarm function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.5

hwAPPortLinkProfileCrcAlarmThreshold

Unsigned32(1–100)

read-write

This object indicates a CRC error alarm threshold. The default value is 50. The unit is 1/10000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.6

hwAPPortLinkProfileCrcAlarmResumeThreshold

Unsigned32(1–100)

read-write

This object indicates a CRC error alarm clearing threshold. The default value is 20. The unit is 1/10000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.7

hwAPPortLinkProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.8

hwAPPortLinkProfilePoeSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the PoE function is enabled on the central AP's interfaces. The default value is 2.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.9

hwAPPortLinkProfilePoePriority

INTEGER{critical(1),high(2),low(3)}

read-write

This object indicates the PoE power supply priority of interfaces on the central AP. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.10

hwAPPortLinkProfilePoeForcePowerSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether forcible PoE power supply is enabled on the central AP's interfaces. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.11

hwAPPortLinkProfilePoeLegacySwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the PSE is enabled to check compatibility of the connected PDs. The default value is 1.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.12

hwAPPortLinkProfilePoeOffTimeRange

OCTET STRING(0–32)

read-write

This object indicates whether to make a configured PoE power-off time range effective on interfaces of the central AP.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.13

hwAPPortLinkProfileAdminStatus

INTEGER{down(1),up(2)}

read-write

This object indicates whether to shut down an AP's wired interface. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.14

hwAPPortLinkProfileLldpdot3TlvType

Unsigned32(0..31)

read-write

This object indicates the type of optional IEEE 802.3 organizational-specific TLVs advertised by an AP's wired interface. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.15

hwAPPortLinkProfileLldpdot3PowerFormat

INTEGER{default(1),ab(2),at(3),bt(4)}

read-write

This object indicates the type of 802.3 Power via MDI TLVs advertised by an AP's wired interface. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.15.1.16

hwAPPortLinkProfileLldpLegacyTlvType

Unsigned32(0..31)

read-write

This object indicates the type of Cisco's proprietary TLVs advertised by an AP's wired interface. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

To create entries in this table, specify the index hwAPPortLinkProfileName and the object hwAPPortLinkProfileRowStatus, and ensure that hwAPPortLinkProfileRowStatus is set to createAndGo(4).

Modification Restriction

You must set hwAPPortLinkProfileCrcAlarmEnable to enable before configuring hwAPPortLinkProfileCrcAlarmThreshold and hwAPPortLinkProfileCrcAlarmResumeThreshold in this table.

Deletion Restriction

The default profile default cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hw2gRadioProfileTable

This table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.

The index of this table is hw2gRadioProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.16.1.1

hw2gRadioProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a 2G radio profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.6

hw2gRadioBeaconInterval

Unsigned32(60–1000)

read-write

This object indicates a Beacon interval. The default value is 100, in TUs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.10

hw2gRadioGuardIntervalMode

INTEGER{short(1),normal(2)}

read-write

This object indicates the GI mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.11

hw2gRadioShortPreamble

INTEGER{disable(1),enable(2)}

read-write

This object indicates the preamble mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.12

hw2gRadioFragmentationThreshold

Integer32(256–2346)

read-write

This object indicates the packet fragmentation threshold, in bytes. The default value is 2346.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.13

hw2gRadioHtAmpduSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the aggregation function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.14

hw2gRadioHtAmpduMaxLengthExponent

Integer32(0–3)

read-write

This object indicates the maximum length of frames converged by an MPDU. The default value is 3.

  • 0: 8191 bytes
  • 1: 16383 bytes
  • 2: 32767 bytes
  • 3: 65535 bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.15

hw2gRadioDot11bgBasicRate

Unsigned32(1–4095)

read-write

This object indicates the basic rate set of the 802.11bg protocol. The default value is 3.

This object is in bitmap format. The bit value 1 indicates a corresponding rate:

  • bit0 (1): 1 Mbit/s
  • bit1 (1): 2 Mbit/s
  • bit2 (1): 5.5 Mbit/s
  • bit3 (1): 6 Mbit/s
  • bit4 (1): 9 Mbit/s
  • bit5 (1): 11 Mbit/s
  • bit6 (1): 12 Mbit/s
  • bit7 (1): 18 Mbit/s
  • bit8 (1): 24 Mbit/s
  • bit9 (1): 36 Mbit/s
  • bit10 (1): 48 Mbit/s
  • bit11 (1): 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.16

hw2gRadioDot11bgSupportRate

Unsigned32(1–4095)

read-write

This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF.

This object is in bitmap format. The bit value 1 indicates a corresponding rate:

  • bit0 (1): 1 Mbit/s
  • bit1 (1): 2 Mbit/s
  • bit2 (1): 5.5 Mbit/s
  • bit3 (1): 6 Mbit/s
  • bit4 (1): 9 Mbit/s
  • bit5 (1): 11 Mbit/s
  • bit6 (1): 12 Mbit/s
  • bit7 (1): 18 Mbit/s
  • bit8 (1): 24 Mbit/s
  • bit9 (1): 36 Mbit/s
  • bit10 (1): 48 Mbit/s
  • bit11 (1): 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.17

hw2gRadioMulticastRate

Unsigned32

read-write

This object indicates the multicast rate.The default value is 65535, indicating auto-sensing.

  • 0: 1 Mbit/s
  • 1: 2 Mbit/s
  • 2: 5.5 Mbit/s
  • 3: 6 Mbit/s
  • 4: 9 Mbit/s
  • 5: 11 Mbit/s
  • 6: 12 Mbit/s
  • 7: 18 Mbit/s
  • 9: 24 Mbit/s
  • 11: 36 Mbit/s
  • 12: 48 Mbit/s
  • 13: 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.18

hw2gRadioWmmMandatorySwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the mandatory WMM matching function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.19

hw2gRadioApEDCAVoiceECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.20

hw2gRadioApEDCAVoiceECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.21

hw2gRadioApEDCAVoiceAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.22

hw2gRadioApEDCAVoiceTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.23

hw2gRadioApEDCAVoiceAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.24

hw2gRadioApEDCAVideoECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.25

hw2gRadioApEDCAVideoECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.26

hw2gRadioApEDCAVideoAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.27

hw2gRadioApEDCAVideoTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.28

hw2gRadioApEDCAVideoAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.29

hw2gRadioApEDCABEECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.30

hw2gRadioApEDCABEECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.31

hw2gRadioApEDCABEAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.32

hw2gRadioApEDCABETXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.33

hw2gRadioApEDCABEAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.34

hw2gRadioApEDCABKECWmax

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.35

hw2gRadioApEDCABKECWmin

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.36

hw2gRadioApEDCABKAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.37

hw2gRadioApEDCABKTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.38

hw2gRadioApEDCABKAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.39

hw2gRadioWmmSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the WMM function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.40

hw2gRadioRtsCtsThreshold

Unsigned32(64–2347)

read-write

This object indicates the request To Send/Clear To Send (RTS/CTS) threshold, in bytes. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.41

hw2gRadioRtsCtsMode

INTEGER{disable(1),ctsToSelf(2),rtsCts(3)}

read-write

This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.42

hw2gRadioPowerAutoAdjustSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the user-by-user power control function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.43

hw2gRadioBeamformingSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the beamforming function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.44

hw2gRadioWifiLight

INTEGER{signalStrength(1),traffic(2)}

read-write

This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1.

NOTE:
  • If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.
  • If WDS is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.
  • For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.
  • For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.
  • For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.
  • If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.45

hw2gRadioChannelSwitchAnnouncementSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the channel switchover announcement function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.46

hw2gRadioChannelSwitchMode

INTEGER{continueTransmitting(1),stopTransmitting(2)}

read-write

This object indicates the channel switch announcement mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.47

hw2gRadioAutoOffServiceSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the scheduled radio disabling function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.48

hw2gRadioAutoOffServiceStartTime

OCTET STRING

read-write

This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss.

NOTE:
  • hh specifies the hour. The value is an integer that ranges from 0 to 23.
  • mm specifies the minute. The value is an integer that ranges from 0 to 59.
  • ss specifies the second. The value is an integer that ranges from 0 to 59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.49

hw2gRadioAutoOffServiceEndTime

OCTET STRING

read-write

This object indicates the end time for disabling the radio. The value is in the format of hh:mm:ss.

NOTE:
  • hh specifies the hour. The value is an integer that ranges from 0 to 23.
  • mm specifies the minute. The value is an integer that ranges from 0 to 59.
  • ss specifies the second. The value is an integer that ranges from 0 to 59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.50

hw2gRadioInterferenceDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the user-by-user power control function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.51

hw2gRadioInterferenceIntraFrequencyThreshold

Unsigned32(1–100)

read-write

This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.52

hw2gRadioInterferenceAdjacentFrequencyThreshold

Unsigned32(1–100)

read-write

This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.53

hw2gRadioInterferenceStationThreshold

Unsigned32(1–256)

read-write

This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.

The default value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.54

hw2gRadioRrmProfile

OCTET STRING(1–35)

read-write

This object indicates the bound RRM profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.55

hw2gRadioAirScanProfile

OCTET STRING(1–35)

read-write

This object indicates the bound air scan profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.56

hw2gRadioProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.57

hw2gRadioProfileUtmostPowerSwitch

{disable(1),enable(2)}

read-write

This object indicates whether the function of sending packets at the maximum power is enabled on a radio under the country code of China. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.58

hw2gRadioProfileConfigEIRP

Unsigned32(1–127)

read-write

This object indicates the transmit power of a radio configured in the radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.59

hw2gRadioProfileRadioType

INTEGER{dot11b(1),dot11g(5),dot11n(9)}

read-write

This object indicates the radio type in a 2G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.64

hw2gRadioAgileAntennaPolarSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether self-adaptive polarization for an agile antenna is enabled in the 2G profile. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.65

hw2gRadioProfileCCAThreshold

Integer32(-85..-40,0)

read-write

This object indicates the CCA threshold. The default value is 0, indicating that no CCA threshold is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.66

hw2gRadioProfileSmartAntennaLowPerThreshold

Unsigned32(10–30)

read-write

This object indicates the lower valid PER threshold in the smart antenna algorithm. The default value is 20, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.67

hw2gRadioProfileSmartAntennaHighPerThreshold

Unsigned32(50–90)

read-write

This object indicates the upper valid PER threshold in the smart antenna algorithm. The default value is 80, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.68

hw2gRadioProfileSmartAntennaTrainingInterval

Unsigned32(10–600,0)

read-write

This object indicates the smart antenna training interval. The default value is 0, indicating that the antenna works in self-adaptation mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.69

hw2gRadioProfileSmartAntennaTrainingMPDUNum

Unsigned32(10–1000)

read-write

This object indicates the number of MPDUs sent by an AP to a STA during smart antenna training. The default value is 640.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.16.1.70

hw2gRadioProfileSmartAntThruputTrainThreshold

Unsigned32(10–50)

read-write

This object indicates the sudden performance change threshold that triggers antenna training. The default value is 10, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table without restriction.

Modification Restriction

  • The air scan and RRM profiles to be bound must already exist.
  • hw2gRadioApEDCAVoiceECWmax and hw2gRadioApEDCAVoiceECWmin must be configured at the same time.
  • hw2gRadioApEDCABEECWmax and hw2gRadioApEDCABEECWmin must be configured at the same time.
  • hw2gRadioAutoOffServiceStartTime and hw2gRadioAutoOffServiceEndTime must be configured at the same time.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hw5gRadioProfileTable

This table is used to configure 5 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.

The index of this table is hw5gRadioProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.17.1.1

hw5gRadioProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a 5G radio profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.6

hw5gRadioBeaconInterval

Unsigned32(60–1000)

read-write

This object indicates a Beacon interval. The default value is 100, in TUs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.10

hw5gRadioGuardIntervalMode

INTEGER{short(1),normal(2)}

read-write

This object indicates the GI mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.12

hw5gRadioFragmentationThreshold

Unsigned32(256–2346)

read-write

This object indicates the packet fragmentation threshold, in bytes. The default value is 2346.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.13

hw5gRadioHtAmpduSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the aggregation function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.14

hw5gRadioHtAmpduMaxLengthExponent

Unsigned32(0–3)

read-write

This object indicates the maximum length of frames converged by an MPDU on the 802.11n radio. The default value is 3.

  • 0: 8191 bytes
  • 1: 16383 bytes
  • 2: 32767 bytes
  • 3: 65535 bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.15

hw5gRadioVhtAmpduMaxLengthExponent

Integer32(0–7)

read-write

This object indicates the maximum length of frames converged by an MPDU on the 802.11ac radio. The default value is 7.

  • 0: 8191 bytes
  • 1: 16383 bytes
  • 2: 32767 bytes
  • 3: 65535 bytes
  • 4: 131071 bytes
  • 5: 262143 bytes
  • 6: 524287 bytes
  • 7: 1048575 bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.16

hw5gRadioVhtAmsduSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the A-MSDU aggregation function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.17

hw5gRadioVhtAmsduMaxFrameNum

Unsigned32(2–15)

read-write

This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.18

hw5gRadioDot11aBasicRate

Unsigned32(1-4095)

read-write

This object indicates the basic rate set of the 802.11a protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s).

This object is in bitmap format. The bit value 1 indicates a corresponding rate:

  • bit0 (1): 1 Mbit/s
  • bit1 (1): 2 Mbit/s
  • bit2 (1): 5.5 Mbit/s
  • bit3 (1): 6 Mbit/s
  • bit4 (1): 9 Mbit/s
  • bit5 (1): 11 Mbit/s
  • bit6 (1): 12 Mbit/s
  • bit7 (1): 18 Mbit/s
  • bit8 (1): 24 Mbit/s
  • bit9 (1): 36 Mbit/s
  • bit10 (1): 48 Mbit/s
  • bit11 (1): 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.19

hw5gRadioDot11aSupportRate

Unsigned32(1-4095)

read-write

This object indicates the supported rate set of the 802.11a protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).

This object is in bitmap format. The bit value 1 indicates a corresponding rate:

  • bit0 (1): 1 Mbit/s
  • bit1 (1): 2 Mbit/s
  • bit2 (1): 5.5 Mbit/s
  • bit3 (1): 6 Mbit/s
  • bit4 (1): 9 Mbit/s
  • bit5 (1): 11 Mbit/s
  • bit6 (1): 12 Mbit/s
  • bit7 (1): 18 Mbit/s
  • bit8 (1): 24 Mbit/s
  • bit9 (1): 36 Mbit/s
  • bit10 (1): 48 Mbit/s
  • bit11 (1): 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.20

hw5gRadioMulticastRate

Unsigned32

read-write

This object indicates the multicast rate.The default value is 65535, indicating auto-sensing.

  • 3: 6 Mbit/s
  • 4: 9 Mbit/s
  • 6: 12 Mbit/s
  • 7: 18 Mbit/s
  • 9: 24 Mbit/s
  • 11: 36 Mbit/s
  • 12: 48 Mbit/s
  • 13: 54 Mbit/s

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.21

hw5gRadioVhtNssMapMaxMcs

OCTET STRING(0–255)

read-write

This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 4 and the maximum MCS value is 7-9. The format is x?x?x?x. The default value is 9?9?9?9.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.22

hw5gRadioWmmMandatorySwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the mandatory WMM matching function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.23

hw5gRadioApEDCAVoiceECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.24

hw5gRadioApEDCAVoiceECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.25

hw5gRadioApEDCAVoiceAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.26

hw5gRadioApEDCAVoiceTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.27

hw5gRadioApEDCAVoiceAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.28

hw5gRadioApEDCAVideoECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.29

hw5gRadioApEDCAVideoECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.30

hw5gRadioApEDCAVideoAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.31

hw5gRadioApEDCAVideoTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.32

hw5gRadioApEDCAVideoAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.33

hw5gRadioApEDCABEECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.34

hw5gRadioApEDCABEECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.35

hw5gRadioApEDCABEAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.36

hw5gRadioApEDCABETXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.37

hw5gRadioApEDCABEAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.38

hw5gRadioApEDCABKECWmax

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.39

hw5gRadioApEDCABKECWmin

Unsigned32(0–15)

read-write

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.40

hw5gRadioApEDCABKAIFSN

Unsigned32(1–15)

read-write

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.41

hw5gRadioApEDCABKTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 μs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.42

hw5gRadioApEDCABKAckPolicy

INTEGER{normal(1),noAck(2)}

read-write

This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.43

hw5gRadioWmmSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the WMM function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.44

hw5gRadioRtsCtsThreshold

Unsigned32(64–2347)

read-write

This object indicates the request To Send/Clear To Send (RTS/CTS) threshold, in bytes. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.45

hw5gRadioRtsCtsMode

INTEGER{disable(1),ctsToSelf(2),rtsCts(3)}

read-write

This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.46

hw5gRadioPowerAutoAdjustSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the user-by-user power control function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.47

hw5gRadioBeamformingSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the beamforming function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.48

hw5gRadioWifiLight

INTEGER{signalStrength(1),traffic(2)}

read-write

This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1.

NOTE:
  • If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.
  • If WDS is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.
  • For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.
  • For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.
  • For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.
  • If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.49

hw5gRadioChannelSwitchAnnouncementSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the channel switchover announcement function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.50

hw5gRadioChannelSwitchMode

INTEGER{continueTransmitting(1),stopTransmitting(2)}

read-write

This object indicates the channel switch announcement mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.51

hw5gRadioAutoOffServiceSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the scheduled radio disabling function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.52

hw5gRadioAutoOffServiceStartTime

OCTET STRING

read-write

This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss.

NOTE:
  • hh specifies the hour. The value is an integer that ranges from 0 to 23.
  • mm specifies the minute. The value is an integer that ranges from 0 to 59.
  • ss specifies the second. The value is an integer that ranges from 0 to 59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.53

hw5gRadioAutoOffServiceEndTime

OCTET STRING

read-write

This object indicates the end time for disabling the radio. The value is in the format of hh:mm:ss.

NOTE:
  • hh specifies the hour. The value is an integer that ranges from 0 to 23.
  • mm specifies the minute. The value is an integer that ranges from 0 to 59.
  • ss specifies the second. The value is an integer that ranges from 0 to 59.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.54

hw5gRadioInterferenceDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the user-by-user power control function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.55

hw5gRadioInterferenceIntraFrequencyThreshold

Unsigned32(1–100)

read-write

This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.56

hw5gRadioInterferenceAdjacentFrequencyThreshold

Unsigned32(1–100)

read-write

This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.57

hw5gRadioInterferenceStationThreshold

Unsigned32(1–256)

read-write

This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC. The default value is 32.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.58

hw5gRadioRrmProfile

OCTET STRING(1–35)

read-write

This object indicates the bound RRM profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.59

hw5gRadioAirScanProfile

OCTET STRING(1–35)

read-write

This object indicates the bound air scan profile. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.60

hw5gRadioProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.61

hw5gRadioProfileUtmostPowerSwitch

{disable(1),enable(2)}

read-write

This object indicates whether the function of sending packets at the maximum power is enabled on a radio under the country code of China. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.62

hw5gRadioProfileConfigEIRP

Unsigned32(1–127)

read-write

This object indicates the transmit power of a radio configured in the radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.63

hw5gRadioProfileRadioType

INTEGER{dot11a(2),dot11n(6),dot11ac(14)}

read-write

This object indicates the radio type in a 5G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.69

hw5gRadioAgileAntennaPolarSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether self-adaptive polarization for an agile antenna is enabled in the 5G profile. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.70

hw5gRadioProfileCCAThreshold

Integer32(-85..-40,0)

read-write

This object indicates the CCA threshold. The default value is 0, indicating that no CCA threshold is configured.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.71

hw5gRadioProfileSmartAntennaLowPerThreshold

Unsigned32(10–30)

read-write

This object indicates the lower valid PER threshold in the smart antenna algorithm. The default value is 20, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.72

hw5gRadioProfileSmartAntennaHighPerThreshold

Unsigned32(50–90)

read-write

This object indicates the upper valid PER threshold in the smart antenna algorithm. The default value is 80, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.73

hw5gRadioProfileSmartAntennaTrainingInterval

Unsigned32(10–600,0)

read-write

This object indicates the smart antenna training interval. The default value is 0, indicating that the antenna works in self-adaptation mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.74

hw5gRadioProfileSmartAntennaTrainingMPDUNum

Unsigned32(10–1000)

read-write

This object indicates the number of MPDUs sent by an AP to a STA during smart antenna training. The default value is 640.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.17.1.75

hw5gRadioProfileSmartAntThruputTrainThreshold

Unsigned32(10–50)

read-write

This object indicates the sudden performance change threshold that triggers antenna training. The default value is 10, in percentage. In addition, the value must be a multiple of 10.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

  • The air scan and RRM profiles to be bound must already exist.
  • hw5gRadioApEDCAVoiceECWmax and hw5gRadioApEDCAVoiceECWmin must be configured at the same time.
  • hw5gRadioApEDCABEECWmax and hw5gRadioApEDCABEECWmin must be configured at the same time.
  • hw5gRadioAutoOffServiceStartTime and hw5gRadioAutoOffServiceEndTime must be configured at the same time.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwRrmProfileTable

This table is used to configure radio resource management parameters, including parameters related to band steering, smart roaming, and UAC.

The index of this table is hwRrmProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.18.1.1

hwRrmProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of the RRM profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.2

hwRrmAutoChannelSelectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the automatic channel selection function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.3

hwRrmAutoTxPowerSelectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the automatic power selection function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.4

hwRrmErrRateThreshold

Unsigned32(20–100)

read-write

This object indicates the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.5

hwRrmAirtimeFairSchduleSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the airtime scheduling function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.6

hwRrmDynamicEdcaSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.7

hwRrmUacLimitClientSnrSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.8

hwRrmUacClientSnrThreshold

Unsigned32(5–75)

read-write

This object indicates the SNR threshold for rejecting access from terminals. The default value is 20. It is expressed in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.9

hwRrmUacPolicySwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the UAC policy function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.10

hwRrmUacPolicyType

INTEGER{users(1),channelUtilization(2),unknow(255)}

read-write

This object indicates the UAC policy. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.11

hwRrmUacClientNumAccessThreshold

Integer32(1–256)

read-write

This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will reject access requests of other new users. The default value is 64.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.12

hwRrmUacClientNumRoamThreshold

Integer32(1–256)

read-write

This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the roaming threshold. If so, the AP denies access of the user.

The default value is 64.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.13

hwRrmUacReachThresholdHideSsidSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the function of hiding the SSID when the value of UAC reaches the specified threshold. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.14

hwRrmBandSteerDenyThreshold

Unsigned32(0–10)

read-write

This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.15

hwRrmBandSteerLbClientThreshold

Unsigned32(0–100)

read-write

This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 100.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.16

hwRrmBandSteerLbGapThreshold

Unsigned32(1–100)

read-write

This object indicates the load difference percentage for triggering inter-band load balancing. The default value is 20.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.17

hwRrmBandSteerClientBandsExpire

Unsigned32(10–300)

read-write

This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the number of received probe messages exceeds the specified threshold, the records of terminal supported bands will be updated and the AP will consider that the terminal supports only this band. The default value is 35.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.18

hwRrmLoadBalanceSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the load balancing group function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.19

hwRrmLoadBalanceClientThreshold

Unsigned32(1–100)

read-write

This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.20

hwRrmLoadBalanceGapThreshold

Unsigned32(1–100)

read-write

This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 20.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.21

hwRrmLoadBalanceDenyThreshold

Unsigned32(1–10)

read-write

This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.22

hwRrmSmartRoamCheckType

Unsigned32

read-write

This object indicates whether STA active roaming is triggered by rate check or SNR check.

The values are as follows:
  • 1: checkSnr
  • 2: checkRate
  • 3: checkAll

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.23

hwRrmSmartRoamSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the smart roaming function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.24

hwRrmSmartRoamSnrThreshold

Unsigned32(5–75)

read-write

This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.25

hwRrmSmartRoamRateThreshold

Unsigned32(1–100)

read-write

This object indicates the STA rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 20, in percentage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.26

hwRrmSmartRoamSnrHighLevelMargin

Unsigned32(10–20)

read-write

This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.27

hwRrmSmartRoamSnrLowLevelMargin

Unsigned32(3–15)

read-write

This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.28

hwRrmSmartRoamSnrCheckInterval

Unsigned32(3–30)

read-write

This object indicates the STA SNR detection interval for triggering smart roaming. The default value is 3, in second.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.29

hwRrmSmartRoamUnableRoamExpireTime

Unsigned32(30–2880)

read-write

This object indicates the aging time of records that STAs are "unable to roam". The default value is 120, in minute.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.30

hwRrmProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.31

hwRrmUacChannelUtiAccessThreshold

Integer32(1–100)

read-write

This object indicates the user CAC access threshold based on the channel usage. If the channel usage reaches the threshold after a new user goes online, the AP will reject access requests of other new users.

The value is expressed in percentage. The default value is 80.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.32

hwRrmUacChannelUtiRoamThreshold

Integer32(1–100)

read-write

This object indicates the user CAC roaming threshold based on the channel usage. When a user roams to an AP, the AP checks whether the current channel usage reaches the roaming threshold. If so, the AP denies access of the user.

The value is expressed in percentage. The default value is 80.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.33

hwRrmSmartRoamQuickKickoffRateThr

Unsigned32(1–100)

read-write

This object indicates the rate-based threshold for quickly disconnecting STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.34

hwRrmSmartRoamQuickKickoffSnrThr

Unsigned32(5–75)

read-write

This object indicates the SNR-based threshold for quickly disconnecting STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.35

hwRrmBandSteerSNRThreshold

Integer32(SIZE (5..75))

read-write

This object indicates the start SNR threshold for triggering 5G-prior access.

The value is expressed in dB. The default value is 20.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.36

hwRrmLoadBalanceMode

INTEGER{staNumber(1),channelUtilization(2)}

read-write

This object indicates the dynamic load balancing mode. The values are as follows:
  • staNumber(1): Controls user access based on the number of users.
  • channelUtilization(2): Controls user access based on the channel usage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.37

hwRrmLoadBalanceChUtilGapThreshold

Unsigned32(1–100)

read-write

This object indicates the channel usage difference threshold for load balancing in a dynamic load balancing group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.38

hwRrmLoadBalanceChUtilStartThreshold

Unsigned32(1–40)

read-write

This object indicates the start threshold for dynamic load balancing based on the channel usage.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.39

hwRrmCalibrateCoverageThr

Integer32(-85–-35)

read-write

This object indicates the TPC coverage threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.40

hwRrmCalibrateMaxTxPwr

Unsigned32(1–127)

read-write

This object indicates the maximum radio calibration power.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.41

hwRrmCalibrateMinTxPwr

Unsigned32(1–127)

read-write

This object indicates the minimum radio calibration power.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.42

hwRrmCalibrateNoiseFloorThr

Integer32(-95–0)

read-write

This object indicates the noise floor for triggering radio calibration.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.43

hwRrmDFSSmartSelectionSwitch INTEGER{disable(1),enable(2)}

read-write

This object indicates whether DFS smart selection is enabled. By default, this function is enabled. The values are as follows:
  • disable(1): Disables DFS smart selection.
  • enable(2): Enables DFS smart selection.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.44

hwRrmDFSRecoverDelayTime

Integer32(0–2880)

read-write

This object indicates the delay in switching back the DFS channel.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.45

hwRrmSmartRoamQuickKickoffSNRCheckInterval

Integer32(300–3000)

read-write

This object indicates the interval for checking the SNR to determine whether to quickly disconnect STAs.

The default value is 500, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.46

hwRrmSmartRoamQuickKickoffSNRPNObserveTime

Integer32(1–10)

read-write

This object indicates the number of PN observation times to determine whether to quickly disconnect STAs.

The default value is 6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.47

hwRrmSmartRoamQuickKickoffSNRPNQualifyTime

Integer32(1–10)

read-write

This object indicates the number of PN observation times criteria are met to determine whether to quickly disconnect STAs.

The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.48

hwRrmErrRateCheckInterval

Integer32(1–10)

read-write

Interval for checking the BER.

The default value is 1, in minutes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.49

hwRrmErrRateCheckTrafficThreshold

Integer32(1–20000)

read-write

Traffic threshold for checking the BER.

The default value is 1250.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.51

hwSfnRoamCheckHighThreshold Integer32(-60–-45)

read-write

This object indicates the upper RSSI threshold for agile distributed SFN roaming.

The default value is -55, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.52

hwSfnRoamCheckLowThreshold Integer32(-70–-55)

read-write

This object indicates the lower RSSI threshold for agile distributed SFN roaming.

The default value is -60, in dBm.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.53

hwSfnRoamCheckRssiAccumulateThreshold Integer32(1–32)

read-write

This object indicates the cumulative RSSI change threshold for agile distributed SFN roaming.

The default value is 8, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.54

hwSfnRoamCheckStaHoldingTimes Integer32(1–32)

read-write

This object indicates the number of STA holding times for agile distributed SFN roaming.

The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.55

hwSfnRoamCheckGapRssiThreshold Integer32(1–32)

read-write

This object indicates the RSSI gap for agile distributed SFN roaming RUs.

The default value is 6, in dB.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.56

hwSfnRoamCheckBetterSnrTimes Integer32(1–32)

read-write

This object indicates the number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU.

The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.57

hwSfnRoamCheckInterval Integer32(300–1500)

read-write

This object indicates the decision period for agile distributed SFN roaming.

The default value is 700, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.58

hwSfnRoamReportInterval Integer32(200–1000)

read-write

This object indicates the interval for RUs to report the STA RSSI.

The default value is 400, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.59

hwRrmMultimediaAirOptimize INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the multimedia air interface optimization function is enabled.
  • disable(1): This function is disabled.
  • enable(2): This function is enabled.

The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.60

hwRrmHighDensityAmcOptimizeSwitch INTEGER{disable(1),enable(2)} read-write

This object indicates the status of the adaptive modulation and coding (AMC) optimization function in high-density scenarios. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.61

hwRrmMultimediaOptimizedThresholdVoice Unsigned32(10–1000)

read-write

This object indicates the packet density threshold for voice users. If the number of a user's packets in the VO queue within the unit time (1 second) exceeds this threshold, the user is a voice user.

The default value is 30.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.62

hwRrmMultimediaOptimizedThresholdVideo Unsigned32(10–1000)

read-write

This object indicates the packet density threshold for video users. If the number of a user's packets in the VI queue within the unit time (1 second) exceeds this threshold, the user is a video user.

The default value is 100.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.63

hwRrmSmartRoamQuickKickoffSwitch INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the function of quickly disconnecting STAs is enabled. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.64

hwRrmSmartRoamQuickKickoffCheckType INTEGER{checkSnr(1),checkRate(2),checkAll(3)}

read-write

This object indicates the check mode for determining whether to quickly disconnect STAs.
  • checkSnr(1): Check the STA SNR.
  • checkRate(2): Check the STA rate.
  • checkAll(3): Check the STA SNR and rate.

The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.65

hwRrmLoadBalanceGapStaNumThreshold

Integer32(0–20)

read-write

This object indicates the load difference threshold for triggering dynamic load balancing based on the number of STAs.

The value 0 indicates that load balancing is based on the percentage of STAs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.67

hwRrmLbDeauthFailTime

Unsigned32(0–5)

read-write

This object indicates the number of attempts to steer STAs in Deauthentication mode.

The default value is 2.

The value 0 indicates that STAs are not steered in Deauthentication mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.68

hwRrmLbBtmFailTime

Unsigned32(0–10)

read-write

This object indicates the number of attempts to steer STAs in BTM mode.

The default value is 5.

The value 0 indicates that STAs are not steered in BTM mode.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.69

hwRrmLbSteerRestrictTime

Unsigned32(0–10)

read-write

This object indicates the time for suppressing STA association with non-target APs during STA steering.

The default value is 5, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.70

hwRrmLbSteerProbeRestrictThreshold

Unsigned32(0–10)

read-write

This object indicates the number of times non-target APs suppress STA Probe frames during STA steering.

The default value is 5.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.71

hwRrmLbSteerAuthRestrictThreshold

Unsigned32(0–5)

read-write

This object indicates the number of times non-target APs suppress STA Authentication frames during STA steering.

The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.73

hwRrmSmartRoamAdvancedScan

INTEGER{disable(1),enable(2)}

read-write

This object indicates the coordinated scanning function of smart roaming.

The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.18.1.74

hwRrmSmartRoamQuickKickoffBackOffTime Unsigned32(1–600)

read-write

This object indicates the backoff time for quickly disconnecting STAs.

The default value is 60.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

  • To modify hwRrmUacClientNumRoamThreshold, modify hwRrmUacClientNumAccessThreshold at the same time. hwRrmUacClientNumAccessThreshold can be separately cduionfigured.
  • To modify hwRrmUacChannelUtiRoamThreshold, modify hwRrmUacChannelUtiAccessThreshold at the same time. hwRrmUacChannelUtiAccessThreshold can be separately configured.
  • To modify hwRrmSmartRoamSnrHighLevelMargin, modify hwRrmSmartRoamSnrLowLevelMargin at the same time.

Deletion Restriction

The default profile cannot be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwAirScanProfileTable

This table is used to configure air scan intervals, duration, and scan channel sets.

The index of this table is hwAirScanProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.19.1.1

hwAirScanProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of an air scan profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.19.1.2

hwAirScanPeriod

Unsigned32(60–100)

read-write

This object indicates the air scan period. The default value is 60, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.19.1.3

hwAirScanInterval

Unsigned32(300–600000)

read-write

This object indicates the scan interval. The default value is 60000, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.19.1.4

hwAirScanChannelSet

INTEGER{countryChannel(1),dcaChannel(2),workChannel(3)}

read-write

This object indicates the scan channel set. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.19.1.8

hwAirScanSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether air scan is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The default profile cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwVapProfileTable

This table is used to configure and query VAP profile parameters.

The index of this table is hwVapProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.20.1.1

hwVapProfileName

OCTET STRING(1-35)

not-accessible

This object indicates the name of a VAP profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.2

hwVapForwardMode

INTEGER{unknown(1),directForward(2),tunnel(3)}

read-write

This object indicates the service forwarding mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.4

hwVapServiceSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the VAP service function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.5

hwVapAutoOffStartTime

OCTET STRING

read-write

This object indicates the start time when the VAP is disabled. The format is HH:MM:SS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.6

hwVapAutoOffEndTime

OCTET STRING

read-write

This object indicates the end time when the VAP is disabled. The format is HH:MM:SS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.7

hwVapTemporaryManagementSwitch

INTEGER{disable(1),enable(2)}

read-write

If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.8

hwVapServiceVlan

Unsigned32(1-4094)

read-write

This object indicates the service VLAN for the VAP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.9

hwVapVlanPool

OCTET STRING(0-35)

read-write

This object indicates the VLAN pool to which the VAP is bound.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.10

hwVapType

INTEGER{service(1),managementAp(2),managementAc(3)}

read-write

This object indicates the VAP type. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.11

hwVapStaAccessMode

INTEGER{disable(1),blacklist(2),whitelist(3)}

read-write

This object indicates the access mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.12

hwVapStaAccessModePorfile

OCTET STRING(0-35)

read-write

This object indicates the STA access profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.15

hwVapRoamLayer3Switch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the Layer 3 roaming function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.16

hwVapBandSteerSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the band steering function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.17

hwVapLearnIpv4Address

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IPv4 address learning function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.19

hwVapLearnIpv4AddressStrict

INTEGER{disable(1),enable(2),enable blackList(3)}

read-write

This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.20

hwVapIpBindCheck

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IP binding relationship check function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.21

hwVapArpBindCheck

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the ARP binding relationship check function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.22

hwVapOptinon82InsertSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.23

hwVapOptinon82InsertRidFormat

INTEGER{apMac(1),apMacSsid(2),userDefined(3),apName(4),apNameSsid(5)}

read-write

This object indicates the mode to append the Option 82 field to DHCP messages. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.24

hwVapDhcpTrustPort

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the radio interface DHCP trust function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.26

hwVapSecurityProfile

OCTET STRING(1-35)

read-write

This object indicates the security profile that is bound to the VAP. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.27

hwVapTrafficProfile

OCTET STRING(1-35)

read-write

This object indicates the traffic profile that is bound to the VAP. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.28

hwVapSsidProfile

OCTET STRING(1-35)

read-write

This object indicates the SSID profile that is bound to the VAP. The default value is default.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.29

hwVapAuthenticationProfile

OCTET STRING(0-35)

read-write

This object indicates the authentication profile that is bound to the VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.31

hwVapProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.32

hwVapUserProfile

OCTET STRING(0-35)

read-write

This object indicates the user profile that is bound to the VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.35

hwVapOptinon82RidUserDefined

OCTET STRING(0-255)

read-write

This object indicates the user-defined format of the remote-ID in the Option 82 field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.36

hwVapOptinon82RidMacFormat

INTEGER{default(0),normal(1),compact(2),hex(3)}

read-write

This object indicates the format of the AP's MAC address in remote-ID in the Option 82 field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.37

hwVapOptinon82InsertCidFormat

INTEGER{apMac(1),apMacSsid(2),userDefined(3),apName(4),apNameSsid(5)}

read-write

This object indicates the format of the circuit-ID (CID) in the Option 82 field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.38

hwVapOptinon82CidUserDefined

OCTET STRING(0-255)

read-write

This object indicates the user-defined format of the circuit-ID in the Option 82 field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.39

hwVapOptinon82CidMacFormat

INTEGER{default(0),normal(1),compact(2),hex(3)}

read-write

This object indicates the format of the AP's MAC address in circuit-ID in the Option 82 field.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.40

hwVapUccProfile

OCTET STRING(0-35)

read-write

This object indicates the UCC profile that is bound to the VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.41

hwVapAntiAttackBroadcastFloodSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable broadcast flood detection.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.42

hwVapAntiAttackBroadcastFloodStaRateThreshold

Unsigned32(5-5000)

read-write

This object indicates the broadcast flood threshold.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.43

hwVapAntiAttackBroadcastFloodBlacklistSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable broadcast flood blacklist.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.55

hwVapTimeRange

OCTET STRING(0–32)

read-write

This object indicates the time-range profile disabled by the VAP at a scheduled time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.57

hwVapSfnRoamSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether agile distributed SFN roaming is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.20.1.58

hwVapStaNetworkDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to forcibly disconnect STAs without traffic. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only when hwVapProfileRowStatus is set to createAndGo(4).

Modification Restriction

  • hwVapAutoOffStartTime and hwVapAutoOffEndTime must be configured at the same time.

  • hwVapServiceVlan and hwVapVlanPool are mutually exclusive.

  • To set hwVapOptinon82InsertRidFormat to apMac(1) or apMacSsid(2), configure hwVapOptinon82RidMacFormat at the same time.

  • To set hwVapOptinon82InsertRidFormat to userDefined(3), configure hwVapOptinon82RidUserDefined at the same time.

  • To set hwVapOptinon82InsertCidFormat to apMac(1) or apMacSsid(2), configure hwVapOptinon82CidMacFormat at the same time.

  • To set hwVapOptinon82InsertCidFormat to userDefined(3), configure hwVapOptinon82CidUserDefined at the same time.

  • hwVapSecurityProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapTrafficProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapSsidProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapAuthenticationProfile and hwVapProfileRowStatus must be configured at the same time.

  • hwVapUccProfile and hwVapProfileRowStatus must be configured at the same time.

Deletion Restriction

This table cannot be deleted when other profiles are bound to it. The default profile of this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwSsidProfileTable

This table is used to configure and query SSID profile parameters.

The index of this table is hwSsidProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.21.1.1

hwSsidProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a VAP profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.2

hwSsidText

OCTET STRING(1–32)

read-write

This object indicates the SSID character string. The default value is HUAWEI-WLAN.

The value is a string of 1 to 32 case-sensitive characters. It supports Chinese characters or Chinese + English characters, without tab characters.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.3

hwSsidHide

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable SSID hiding. The default value is 1.

  • 1: Disable (The SSID is not hidden.)
  • 2: Enable

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.4

hwSsidAssocTimeout

Unsigned32(1–30)

read-write

This object indicates the association timeout period of a user. The default value is 5 minutes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.5

hwSsidMaxStaNum

Unsigned32(1–256)

read-write

This object indicates the maximum number of access users on a VAP. The default value is 64.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.6

hwSsidLegacyStaSwitch

INTEGER{disable(1),enable(2),onlyDot11b(3)}

read-write

This object indicates whether to allow access from non-HT STAs. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.7

hwSsidDtimInterval

Unsigned32(1–255)

read-write

This object indicates the DTIM interval. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.8

hwSsidClientEdcaVoiceECWmax

Unsigned32(0–15)

read-write

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VO queue on the station (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.9

hwSsidClientEdcaVoiceECWmin

Unsigned32(0–15)

read-write

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VO queue on the station (ECWmaxECWmin). The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.10

hwSsidClientEdcaVoiceAIFSN

Unsigned32(1–15)

read-write

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VO queue on the station. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.11

hwSsidClientEdcaVoiceTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VO queue on the station. The default value is 47.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.12

hwSsidClientEdcaVideoECWmax

Unsigned32(0–15)

read-write

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VI queue on the station (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.13

hwSsidClientEdcaVideoECWmin

Unsigned32(0–15)

read-write

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VI queue on the station (ECWmaxECWmin). The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.14

hwSsidClientEdcaVideoAIFSN

Unsigned32(1–15)

read-write

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VI queue on the station. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.15

hwSsidClientEdcaVideoTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VI queue on the station. The default value is 94.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.16

hwSsidClientEdcaBeECWmax

Unsigned32(0–15)

read-write

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BE queue on the station (ECWmaxECWmin). The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.17

hwSsidClientEdcaBeECWmin

Unsigned32(0–15)

read-write

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BE queue on the station (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.18

hwSsidClientEdcaBeAIFSN

Unsigned32(1–15)

read-write

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BE queue on the station. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.19

hwSsidClientEdcaBeTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BE queue on the station. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.20

hwSsidClientEdcaBkECWmax

Unsigned32(0–15)

read-write

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BK queue on the station (ECWmaxECWmin). The default value is 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.21

hwSsidClientEdcaBkECWmin

Unsigned32(0–15)

read-write

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BK queue on the station (ECWmaxECWmin). The default value is 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.22

hwSsidClientEdcaBkAIFSN

Unsigned32(1–15)

read-write

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BK queue on the station. The default value is 7.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.23

hwSsidClientEdcaBkTXOPLimit

Unsigned32(0–255)

read-write

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BK queue on the station. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.24

hwSsidInboundCarCir

Unsigned32(64–4294967295)

read-write

This object indicates the inbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.25

hwSsidInboundCarPir

Unsigned32(64–4294967295)

read-write

This object indicates the inbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.26

hwSsidInboundCarCbs

Unsigned32(1500–4294967295)

read-write

This object indicates the inbound committed burst size (CBS) of the SSID. The default value is 0 bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.27

hwSsidInboundCarPbs

Unsigned32(1500–4294967295)

read-write

This object indicates the inbound peak burst size (PBS) of the SSID. The default value is 0 bytes.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.32

hwSsidProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.33

hwSsidHideWhileReachMaxSta

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether APs are enabled to automatically hide SSIDs when the number of users reaches the maximum.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.34

hwSsidBeacon2gRate

INTEGER (1 | 2 | 5.5 | 6 | 9 | 11 | 12 | 18 | 24 | 36 | 48 | 54)

read-write

This object indicates the rate at which 2.4 GHz Beacon frames are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.35

hwSsidBeacon5gRate

INTEGER (1 | 2 | 5.5 | 6 | 9 | 11 | 12 | 18 | 24 | 36 | 48 | 54)

read-write

This object indicates the rate at which 5 GHz Beacon frames are sent.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.36

hwSsidDenyBroadcastProbe

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether an AP is configured not to respond to broadcast Probe Request frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.37

hwSsidProbeResponseRetry

Unsigned32(0–3)

read-write

This object indicates the number of times Probe Response packets are retransmitted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.38

hwSsidUapsd

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the U-APSD function is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.39

hwSsidActiveDullClient

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the function of preventing terminals from entering energy-saving mode is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.40

hwSsidMuMIMOSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the MU-MIMO function is enabled. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.44

hwSsidQbssLoadSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable an AP to notify STAs of its load. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.45

hwSsidSingleTxchainSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable the single-antenna transmission mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.46

hwSsidMuMIMOOptimizeSwitch

INTEGER{disable(1),enable(2)}

read-write

Whether the MU-MIMO optimization function is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.21.1.47

hwSsidAdvertiseApNameSwitch

INTEGER{disable(1),enable(2)}

read-write

Whether Beacon frames are enabled to carry the AP name. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Entries can be created in this table only when hwSsidProfileRowStatus is set to createAndGo(4).

Modification Restriction

  • hwSsidInboundCarCbs and hwSsidInboundCarCir must be configured at the same time.
  • hwSsidInboundCarPir and hwSsidInboundCarCir must be configured at the same time.
  • hwSsidInboundCarPbs and hwSsidInboundCarCbs must be configured at the same time.
  • hwSsidInboundCarPir, hwSsidInboundCarCbs, and hwSsidInboundCarPbs must be configured at the same time.
  • You must set hwSsidProfile80211rEnable to enable before configuring hwSsidProfile80211rMode and hwSsidProfile80211rReassociateTimeout in this table.

Deletion Restriction

This table cannot be deleted when other profiles are bound to it. The default profile of this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwSecurityProfileTable

The index of this table is hwSecurityProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.22.1.1

hwSecurityProfileName

OCTET STRING(1–35)

read-write

This object indicates the name of a security profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.2

hwSecurityPolicy

INTEGER{wapiCert(1),wapiPsk(2),wpaDot1x(3),wpaPsk(4),wpa2Dot1x(5),wpa2Psk(6),wepShareKey(7),open(8),wpaWpa2Psk(9),wpaWpa2Dot1x(10),wepNoauth(11)}

read-write

This object indicates the air interface authentication policy. The default value is 8.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.3

hwSecurityWepEncrypt

Unsigned32(0–65535)

read-write

This object indicates four PSK encryption types. The value is 4 bits long. 1, 2, and 3 indicate encryption types wep(40), wep(104), and wep(128) respectively. The default value is 4369 (0x1111 in hexadecimal notation). For example:

  • If all the four WEP PSK encryption types are set to wep(128), the value of the object is 0x3333.
  • If only the encryption type of PSK1 is set to wep(128), the value of the object is 0x0003.
  • If only the encryption type of PSK4 is set to wep(40), the value of the object is 0x1000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.4

hwSecurityWepPskMode

Unsigned32(0–65535)

read-write

This object indicates four WEP PSK modes. The value is 4 bits long. 1 and 2 indicate pskPassphase(1) and pskHex(2) respectively. The default value is 4369 (0x1111 in hexadecimal notation). For example:

  • If all the four WEP PSK modes are set to Hex, the value of the object is 0x2222.
  • If only the PSK mode of PSK1 is set to Hex, the value of the object is 0x0002.
  • If only the PSK mode of PSK4 is set to Passphase, the value of the object is 0x1000.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.5

hwSecurityWepPsk1

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.6

hwSecurityWepPsk2

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.7

hwSecurityWepPsk3

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.8

hwSecurityWepPsk4

OCTET STRING(5–68)

read-write

This object indicates the WEP PSK4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.9

hwSecurityWepDefaultKeyId

INTEGER(0–3)

read-write

This object indicates the default key ID for WEP. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.10

hwSecurityWpaEncrypt

INTEGER{unknown(0),wpaAes(1),wpaTkip(2),wpaAesTkip(3)}

read-write

This object indicates the WPA/WPA2 encryption algorithm. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.11

hwSecurityWpaPskMode

INTEGER{pskPassphase(1),pskHex(2)}

read-write

This object indicates whether the WPA PSK mode is PassPhase or Hex. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.12

hwSecurityWpaPsk

OCTET STRING(0|6|8–108)

read-write

This object indicates the WPA/WPA2 PSK.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.13

hwSecurityWpaPtkUpdateSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of WPA PTK update function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.14

hwSecurityWpaPtkUpdateInterval

Unsigned32(30–86400)

read-write

This object indicates the WPA PTK update interval. The default value is 43200 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.15

hwSecurityWapiPskMode

INTEGER{pskPassphase(1),pskHex(2)}

read-write

This object indicates the WAPI PSK mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.16

hwSecurityWapiPsk

OCTET STRING(0|6|8–108)

read-write

This object indicates the WAPI PSK.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.17

hwSecurityWapiAsuIpAddress

IpAddress

read-write

The object indicates the IP address of the WAPI ASU.The default value is 255.255.255.255. Setting this object to the default value will cancel the configuration of the WAPI ASU IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.18

hwSecurityWapiIssuerCertFileName

OCTET STRING(0–255)

read-write

This object indicates the certificate file name of the WAPI issuer.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.19

hwSecurityWapiAsuCertFileName

OCTET STRING(0–255)

read-write

This object indicates the certificate file name of the WAPI ASU.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.20

hwSecurityWapiAcCertFileName

OCTET STRING(0–255)

read-write

This object indicates the certificate file name of the WAPI AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.21

hwSecurityWapiAcPrvKeyFileName

OCTET STRING(0–255)

read-write

This object indicates the private key file name of the WAPI AC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.22

hwSecurityWapiIssuerPfxPassword

OCTET STRING(0–68)

read-write

This object indicates the WAPI issuer certificate key.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.23

hwSecurityWapiAsuPfxPassword

OCTET STRING(0–68)

read-write

This object indicates the WAPI ASU certificate key.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.24

hwSecurityWapiAcPfxPassword

OCTET STRING(0–68)

read-write

This object indicates the WAPI AC certificate key.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.25

hwSecurityWapiAcPrvKeyPassword

OCTET STRING(0–68)

read-write

This object indicates the key for reading the AC private key file.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.26

hwSecurityWapiCertRetransCount

Unsigned32(1–10)

read-write

This object indicates the number of retransmissions of WAPI certificate authentication packets. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.27

hwSecurityWapiBkThreshold

Unsigned32(1–100)

read-write

This object indicates the WAPI BK lifetime percentage. The default value is 80.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.28

hwSecurityWapiBkLifetime

Unsigned32(600–604800)

read-write

This object indicates the interval for updating the WAPI BK. The default value is 10000 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.29

hwSecurityWapiUskUpdateMethod

INTEGER{disabled(1), timeBased(2)}

read-write

This object indicates the WAPI USK update mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.30

hwSecurityWapiMskUpdateMethod

INTEGER{disabled(1), timeBased(2)}

read-write

This object indicates the WAPI MSK update mode. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.31

hwSecurityWapiUskUpdateInterval

Unsigned32(600–604800)

read-write

This object indicates the time-based interval for updating the WAPI USK. The default value is 86400 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.33

hwSecurityWapiUskRetansCount

Unsigned32(1–10)

read-write

This object indicates the maximum number of retransmissions of a WAPI USK negotiation packet. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.34

hwSecurityWapiMskUpdateInterval

Unsigned32(600–604800)

read-write

This object indicates the time-based interval for updating the WAPI MSK. The default value is 86400 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.36

hwSecurityWapiMskRetansCount

Unsigned32(1–10)

read-write

This object indicates the maximum number of retransmissions of a WAPI MSK negotiation packet. The default value is 3.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.37

hwSecurityWapiSATimeout

Unsigned32(1–255)

read-write

This object indicates the timeout period of a WAPI-based security association (SA). The default value is 60 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.38

hwSecurityPMF

INTEGER{disable(1),optional(2),mandatory(3)}

read-write

This object indicates the status of the PMF function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.22.1.39

hwSecurityProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

hwSecurityWepEncrypt and hwSecurityWepPskMode must be both configured, and at least one of hwSecurityWepPsk1, hwSecurityWepPsk2, hwSecurityWepPsk3, and hwSecurityWepPsk4 must be configured.

Operations can be performed on the following objects only when hwSecurityPolicy is set to wapiCert(1) or wapiPsk(2):
  • hwSecurityWapiCertRetransCount
  • hwSecurityWapiBkThreshold
  • hwSecurityWapiBkLifetime
  • hwSecurityWapiUskUpdateMethod
  • hwSecurityWapiMskUpdateMethod
  • hwSecurityWapiUskUpdateInterval
  • hwSecurityWapiUskRetansCount
  • hwSecurityWapiMskUpdateInterval
  • hwSecurityWapiMskRetansCount
  • hwSecurityWapiSATimeout

Deletion Restriction

The entries in this table cannot be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwAPTrafficProfileTable

This table is used to configure and query traffic profile parameters.

The index of this table is hwAPTrafficProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.23.1.1

hwAPTrafficProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a traffic profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.2

hwAPTrafficProfilePriorityMapDnTrustMode

INTEGER{trustDSCP(1),trust8021P(2)}

read-write

This object indicates the downstream service priority mapping mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.3

hwAPTrafficProfilePriorityDscpDnMap80211e

OCTET STRING(1–256)

read-write

This object indicates the mapping from DSCP priorities of 802.3 packets to user priorities of 802.11 packets when data packets are sent to an AP from upper-layer devices. DSCP priorities of 802.3 packets range from 0 to 63, and user priorities of 802.11 packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.4

hwAPTrafficProfilePriority80211eUpMapDscp

OCTET STRING(1–256)

read-write

This object indicates the mapping from user priorities of 802.11 packets to DSCP priorities of tunnel packets when data packets are sent to the AC from an AP. User priorities of 802.11 packets range from 0 to 7, and DSCP priorities of tunnel packets range from 0 to 63. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.5

hwAPTrafficProfileUserIsolate

INTEGER{disable(1),l2Isolate(3)}

read-write

This object indicates the user isolation mode. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.6

hwAPTrafficProfileRateLimitClientUp

Unsigned32(64–4294967295)

read-write

This object indicates the STA's uplink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.7

hwAPTrafficProfileRateLimitClientDn

Unsigned32(64–4294967295)

read-write

This object indicates the STA's downlink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.8

hwAPTrafficProfileRateLimitVapUp

Unsigned32(64–4294967295)

read-write

This object indicates the VAP's uplink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.9

hwAPTrafficProfileRateLimitVapDn

Unsigned32(64–4294967295)

read-write

This object indicates the VAP's downlink rate limit. The default value is 4294967295, in kbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.11

hwAPTrafficProfileIGMPSnooping

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IGMP snooping function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.12

hwAPTrafficProfileIGMPSnoopingReportSuppress

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the IGMP snooping report suppression function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.13

hwAPTrafficProfileMcToUc

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the function of converting multicast to unicast. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.14

hwAPTrafficProfileOptimizeSuppressionBc

Unsigned32(0–14881000|4294967295)

read-write

This object indicates information about broadcast storm suppression. The unit is pps. The default value is 4294967295, indicating that broadcast storm suppression is not enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.15

hwAPTrafficProfileOptimizeSuppressionUc

Unsigned32(0–14881000|4294967295)

read-write

This object indicates information about unknown unicast storm suppression. The unit is pps. The default value is 4294967295, indicating that broadcast storm suppression is not enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.16

hwAPTrafficProfileOptimizeSuppressionMc

Unsigned32(0–14881000|4294967295)

read-write

This object indicates information about multicast storm suppression. The unit is pps. The default value is 4294967295, indicating that broadcast storm suppression is not enabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.24

hwAPTrafficProfileOptimizeStaBridgeForward

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the STA bridge forwarding function. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.25

hwAPTrafficProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.26

hwAPTrafficProfilePriorityMapUpTrustMode

INTEGER{trust80211e(1),trustdscp(2)}

read-write

Mapping priority from upper-layer network devices.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.27

hwAPTrafficProfilePriorityDscpUpMapDscp

OCTET STRING(1–256)

read-write

This object indicates the mapping from DSCP priorities of 802.11 packets to DSCP priorities of tunnel packets when data packets are sent to the AC from an AP. DSCP priorities range from 0 to 63. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.29

hwAPTrafficProfileMcToUcDynamicAdatptive

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether to enable adaptive multicast-to-unicast conversion. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.30

hwAPTrafficProfileIGMPSnoopingMaxBandwidth

Unsigned32(0–10000000)

read-write

This object indicates the maximum multicast bandwidth of a VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.31

hwAPTrafficProfileIGMPSnoopingMaxUser

Unsigned32(0–1000)

read-write

This object indicates the maximum number of multicast group memberships on a VAP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.32

hwAPTrafficProfilePriorityDscpUpMap8021p

OCTET STRING(1–256)

read-write

This object indicates the mapping from DSCP priorities of 802.11 packets to 802.1p priorities of tunnel packets when data packets are sent to the AC from an AP. DSCP priorities of 802.11 packets range from 0 to 63, and 802.1p priorities of tunnel packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.33

hwAPTrafficProfilePriority80211eUpMap8021p

OCTET STRING(1–256)

read-write

This object indicates the mapping from user priorities of 802.11 packets to 802.1p priorities of tunnel packets when data packets are sent to the AC from an AP. User priorities of 802.11 packets and 802.1p priorities of tunnel packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.34

hwAPTrafficProfilePriority8021pDnMap80211e

OCTET STRING(1–256)

read-write

This object indicates the mapping from 802.1p priorities of 802.3 packets to user priorities of 802.11 packets when data packets are sent to an AP from upper-layer devices. 802.1p priorities of 802.3 packets and user priorities of 802.11 packets range from 0 to 7. The mapped priorities are separated by comma (,).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.35 hwAPTrafficProfilePriorityMapUpPayloadTrustMode

INTEGER{trust80211e(1),trustDSCP(2)}

read-write

This object indicates the 802.3 packet priority mapping when data packets are sent from an AP to upper-layer devices. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.23.1.36 hwAPTrafficProfileSvpVoice

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether the SVP voice traffic optimization function is enabled.

The default value is 1.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

Before setting hwAPTrafficProfileIGMPSnoopingReportSuppress to enable(2), set hwAPTrafficProfileIGMPSnooping to enable(2).

Deletion Restriction

This table cannot be deleted when other profiles are bound to it. The default profile of this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwAPTrafficProfileFilterTable

This table is used to configure QoS filter information.

The indexes of this table are hwAPTrafficProfileName, hwAPTrafficProfileFilterType, and hwAPTrafficProfileFilterDirection.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.24.1.1

hwAPTrafficProfileFilterDirection

INTEGER{inbound(0),outbound(1)}

not-accessible

This object indicates the ACL rule direction for packet filtering in a traffic profile. This parameter has no default value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.24.1.2

hwAPTrafficProfileFilterType

INTEGER{ipv4(1)}

not-accessible

This object indicates the ACL rule type for packet filtering in a traffic profile. This parameter has no default value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.24.1.3

hwAPTrafficProfileFilterACLID

Integer32(3000–3031|6000–6031)

read-write

This object indicates the ACL rule for packet filtering in a traffic profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.24.1.4

hwAPTrafficProfileFilterRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

  • Entries can be created in this table only when hwAPTrafficProfileTable exists.
  • hwAPTrafficProfileFilterRowStatus and hwAPTrafficProfileFilterACLID must be configured at the same time.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted only when hwAPTrafficProfileTable exists.

Access Restriction

The entries in this table can be read without restriction.

hwWlanVlanPoolTable

This table is used to configure VLAN pools.

The index of this table is hwVlanPoolName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.25.1.1

hwVlanPoolName

OCTET STRING(1–31)

not-accessible

This object indicates the VLAN pool name. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.25.1.2

hwVlanPoolVlanlist

OCTET STRING(1–640)

read-write

This object indicates the VLAN list.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.25.1.3

hwVlanPoolAssignMethod

INTEGER{hash(1),even(2)}

read-write

This object indicates the VLAN pool allocation algorithm. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.25.1.4

hwVlanPoolRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When creating entries, you must set hwVlanPoolName, hwVlanPoolRowStatus, and hwVlanPoolRowStatus to createAndGo(4).

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanStaWhitelistProfileTable

This table is used to create STA whitelist profiles.

The index of this table is hwWlanStaWhitelistProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.26.1.1.1

hwWlanStaWhitelistProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a STA whitelist profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.26.1.1.2

hwWlanStaWhitelistProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

A STA whitelist profile must be created.

hwWlanStaWhitelistProfileConfigTable

This table is used to configure STA whitelist profiles.

The indexes of this table are hwWlanStaWhitelistProfileName and hwWlanStaWhitelistStaMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.26.2.1.1

hwWlanStaWhitelistStaMac

MacAddress

not-accessible

This object indicates the whitelist.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.26.2.1.2

hwWlanStaWhitelistRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.26.2.1.3

hwWlanStaWhitelistStaMacDescription

OCTET STRING(0–80)

read-write

This object indicates description of the STA MAC address.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

A STA whitelist must be added in the STA whitelist profile.

hwWlanStaWhitelistProfileOuiTable

This table is used to configure a STA whitelist profile.

The index of this table is hwWlanStaWhitelistProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.26.3.1.1

hwWlanStaWhitelistOui

OCTET STRING (SIZE (8))

not-accessible

This object indicates the OUI of STAs in a whitelist. The value is in the format of XX-XX-XX. XX is a hexadecimal number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.26.3.1.2

hwWlanStaWhitelistOuiRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.26.3.1.3

hwWlanStaWhitelistOuiDescription

OCTET STRING (SIZE (0..80))

read-write

This object indicates the OUI description of STAs in a whitelist.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The entries in this table can be created without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read only when a STA whitelist is added to a STA whitelist profile.

hwWlanStaBlacklistProfileTable

This table is used to create STA blacklist profiles.

The index of this table is hwWlanStaBlacklistProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.27.1.1.1

hwWlanStaBlacklistProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the STA blacklist profile name. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.27.1.1.2

hwWlanStaBlacklistProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

A STA blacklist profile must be created.

hwWlanStaBlacklistProfileConfigTable

This table is used to configure STA blacklist profiles.

The indexes of this table are hwWlanStaBlacklistProfileName and hwWlanStaBlacklistStaMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.27.2.1.1

hwWlanStaBlacklistStaMac

MacAddress

not-accessible

This object indicates the blacklist.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.27.2.1.2

hwWlanStaBlacklistRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.27.2.1.3

hwWlanStaBlacklistStaMacDescription

OCTET STRING(0–80)

read-write

This object indicates description of the STA MAC address.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

A blacklist profile must be created, and a STA blacklist must be added in the blacklist profile.

hwWidsProfileTable

This table is used to configure device detection, attack detection, and device containment.

The index of this table is hwWidsProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.28.1.1

hwWidsProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a WIDS profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.5

hwWidsProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.6

hwWidsDeviceReportInterval

Unsigned32(10–3600)

read-write

This object indicates the device detection reporting interval. The default value is 300 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.8

hwWidsSpoofProfile

OCTET STRING(0–35)

read-write

This object indicates the name of a WIDS spoof SSID profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.9

hwWidsWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the name of a WIDS whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.10

hwWidsBruteForceDetectInterval

Unsigned32(10–120)

read-write

This object indicates the interval for brute force attack detection. The default value is 60 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.11

hwWidsBruteForceDetectThreshold

Unsigned32(1–100)

read-write

This object indicates the threshold for the number of brute force attack attempts, namely, the threshold for the number of key negotiation failures within a detection period. If the number of brute-force attack attempts exceeds the threshold, the terminal initiates brute force attacks. The default value is 20.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.12

hwWidsBruteForceQuietTime

Unsigned32(60–36000)

read-write

This object indicates the quiet period for brute force attack alarm reporting. The default value is 600 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.13

hwWidsFloodDetectInterval

Unsigned32(10–120)

read-write

This object indicates the flood attack detection interval. The default value is 10 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.14

hwWidsFloodDetectThreshold

Unsigned32(1–1000)

read-write

This object indicates the threshold for food attack detection. If the number of packets of the same type received within a detection period exceeds the threshold, flood attacks occur. The default value is 500.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.15

hwWidsFloodQuietTime

Unsigned32(60–36000)

read-write

This object indicates the quiet period for flood attack alarm reporting. The default value is 600 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.16

hwWidsWeakIvQuietTime

Unsigned32(60–36000)

read-write

This object indicates the quiet period for weak IV attack alarm reporting. The default value is 600 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.17

hwWidsSpoofQuietTime

Unsigned32(60–36000)

read-write

This object indicates the quiet period for spoofing attack alarm reporting. The default value is 600 seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.18

hwWidsDynamicBlackListSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the dynamic blacklist function. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.19

hwWidsRogueContainModeBmp

Unsigned32

read-write

This object indicates the bit map of rogue device countering types. The default value is 0.

  • bit0: rogue AP using a pseudo SSID
  • bit1: rogue terminal
  • bit2: terminal protected using a whitelist
  • bit3: rogue terminal
  • bit4: open-authentication rogue AP

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.28.1.20

hwWidsStaWhitelistProfile

OCTET STRING(0–35)

read-write

This objects indicates the name of a STA whitelist profile.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The profile to be bound must already exist.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWidsSpoofProfileTable

This table is used to configure matching rules for spoof APs.

The indexes of this table are hwWidsSpoofProfileName and hwWidsSpoofSsidRegex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.32.1.1

hwWidsSpoofProfileName

OCTET STRING(1–35)

not-accessible

This object indicates the name of a WIDS spoof profile. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.32.1.2

hwWidsSpoofSsidRegex

OCTET STRING(1–48)

not-accessible

This object indicates the matching rules for spoofing SSIDs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.32.1.3

hwWidsSpoofProfileRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWidsWhitelistProfileMacTable

This table is used to configure WIDS MAC whitelists.

The index of this table is hwWidsWhitelistProfileName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications