No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-VPN-DIAGNOSTICS-MIB

HUAWEI-VPN-DIAGNOSTICS-MIB

Functions Overview

HUAWEI-VPN-DIAGNOSTICS-MIB includes the two parts:

The first part describes operations of MAC populate and MAC purge, which can be used to display the OAM MAC list on the local and corresponding statistics.

The second part describes the operation used to trigger the device to initiate vpn-config ping and read corresponding results. vpn-config ping is used to obtain configurations at both two ends of the VPN by sending probe packets and check whether these configurations are consistent.

Root directory:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).vpndiagnostics(172)

Relationships Between Tables

Figure 129-1  Relationships Between hwVPNCFGPingTable and hwVpnCfgPingResultTable

Relationships between hwVPNCFGPingTable and hwVpnCfgPingResultTable are shown in above.

Description of Single Objects

hwOamMacPopulateCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.1.1

hwOamMacPopulateCount

Integer32

Read-only

The value of this object identifies the number of Populate packets received on the current device.

This object is implemented as defined in the corresponding MIB file.

hwOamMacPurgeCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.1.2

hwOamMacPurgeCount

Integer32

Read-only

The value of this object identifies the number of Purge packets received on the current device.

This object is implemented as defined in the corresponding MIB file.

hwOamMacPurgeRegCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.1.3

hwOamMacPurgeRegCount

Integer32

Read-only

The value of this object identifies the number of Purge + Register packets received on the current device.

This object is implemented as defined in the corresponding MIB file.

hwOamMacCountReset

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.1.4

hwOamMacCountReset

INTEGER{ populatereset(1), purgereset(2), purgeregreset(3), allreset(4)}

Read-write

  • This value of this object identifies the clearance of statistics. 1: indicates that statistics of hwOamMacPopulateCout is cleared.
  • 2: indicates that statistics of hwOamMacPurgeCout are cleared.
  • 3: indicates that statistics of hwOamMacPurgeRegCout are cleared.
  • 4: indicates that statistics of hwOamMacPopulateCout, hwOamMacPurgeCout, and hwOamMacPurgeRegCout are cleared.
  • The default value is 4.
NOTE:

When you perform a read operation, only the value 4 can be returned.

This object is implemented as defined in the corresponding MIB file.

hwOamMacSwitch

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.1.5

hwOamMacSwitch

INTEGER{ enable(1), disable(2)}

Read-write

The value of this object identifies whether the MAC populate and MAC purge operations are supported.
  • 1: indicates that the MAC populate and MAC purge operations are supported.
  • 2: indicates that the MAC populate and MAC purge operations are not supported.
The default value is 1.

This object is implemented as defined in the corresponding MIB file.

hwOamMacEntryNum

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.1.6

hwOamMacEntryNum

Integer32

Read-only

The value of this object identifies the number of entries in hwOamMacDisplayTable.

This object is implemented as defined in the corresponding MIB file.

Description of MIB Tables

hwOamMacOperTable

This table describes the implementation of MAC populate and MAC purge.

The index of this table is hwOamMacOperIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.2.1.1

hwOamMacOperIndex

Integer32

Not-accessible

The value of this object identifies the index of the operation table. The value is permanently 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.2

hwOamMacOperAddress

MacAddress

Read-create

This object indicates the OAM MAC address to be used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.3

hwOamMacOperVsiName

OctetString

Read-create

This object indicates the name of a VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.4

hwOamMacOperType

MacOpType

Read-create

This object indicates the operation type.

1: indicates that the populate operation is performed.

2: indicates that the purge operation is performed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.5

hwOamMacOperRegister

EnabledStatus

Read-create

This object indicates whether the MAC address is reserved for the OAM test during the purge operation.

1: indicates that the MAC address is reserved.

2: indicates that the MAC address is not reserved.

The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.6

hwOamMacOperFlood

EnabledStatus

Read-create

This object indicates whether the OAM MAC address is flooded during the populate or purge operation.

1: indicates that the OAM MAC address is flooded.

2: indicates that the OAM MAC address is not flooded.

The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.7

hwOamMacOperNum

Integer32

Read-create

The value of this object identifies the number of packets to be sent. The value ranges from 1 to 5.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.2.1.8

hwOamMacOperRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

A MIB can have only one hwOamMacOperTable, which means that hwOamMacOperIndex is permanently 1. During the populate operation, it is recommended that no value should be set for hwOamMacOperRegister. If the value of hwOamMacOperRegister is enable(1), no entry in this table cannot be created.

Modification Restriction

Parameters can be modified after the initial creation of this table.

Deletion Restriction

The deletion of the entries in this table does not trigger the performance of MAC populate or MAC purge.

Access Restriction

The entries in this table can be read without restriction.

hwOamMacListTable

This table describes the available OAM MAC addresses that are applied from Huawei.

The index of this table is hwOamMacListIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.3.1.1

hwOamMacListIndex

Integer32

Not-accessible

The value of this object identifies the indexes of all available OAM MAC addresses. Currently, the value ranges from 1 to 10.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.3.1.2

hwOamMacListAddress

MacAddress

Read-only

This object indicates the OAM MAC address used in the diagnostic test on the MAC address learning capacity.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwOamMacDisplayTable

This table describes information about the OAM MAC address populated on the local device.

The index of this table is hwOamMacDisplayIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.1.4.1.1

hwOamMacDisplayIndex

Integer32

Not-accessible

The value of this object identifies the indexes of all available OAM MAC addresses. Currently, the value ranges from 1 to 100.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.4.1.2

hwOamMacDisplayAddress

MacAddress

Read-only

This object indicates the OAM MAC address to be displayed.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.4.1.3

hwOamMacDisplayType

MacOpType

Read-only

This object indicates the type of the MAC address.
  • 1: indicates the MAC address to be populated.
  • 2: indicates the MAC address to be purged.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.4.1.4

hwOamMacDisplayVsiName

OctetString

Read-only

This object indicates the name of a VSI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.4.1.5

hwOamMacDisplayAgeTime

Integer32

Read-only

The value of this object identifies the aging time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.1.4.1.6

hwOamMacDisplayLsrId

IpAddress

Read-only

This object indicates the LSR ID.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwVpnCfgPingTable

This table is used to create a VPNS CFG ping instance and initiate a probe to check the consistence of configurations on both ends of the VPN.

The index of this table is hwVpnCfgPingIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.2.1.1.1

hwVpnCfgPingIndex

Integer32

Not-accessible

The value of this object identifies the index of an operation instance. The value ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.2

hwVpnCfgPingPeerIpType

InetAddressType

Read-create

This object indicates the type of the peer IP address. It is used to identify the value type of hwVPNCFGPingPeerIP, which can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.3

hwVpnCfgPingPeerIp

InetAddress

Read-create

This object indicates the IP address of the peer end.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.4

hwVpnCfgPingVpnIdType

INTEGER { martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)}

Read-create

This object indicates the type of the VPN flag. It is used to identify the value type of hwVPNCFGPingVPNID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.5

hwVpnCfgPingVpnId

OCTET STRING

Read-create

This object indicates a VPN flag. The value is a string of characters.
  • If the VPN is in VPLS mode, the flag is displayed as VSI name.
  • If the VPN is in L3VPN mode, the flag is displayed as VPN instance.

It is invalid for PWE3 or Martini VLL.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.6

hwVpnCfgPingPwId

Unsigned32

Read-create

The value of this object identifies the PW-ID. This value is configured for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.7

hwVpnCfgPingTunnelUsed

INTEGER

Read-create

This object indicates the forwarding mode (such as tunnel forwarding) of Request packets or Reply packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.8

hwVpnCfgPingOperation

EnabledStatus

Read-create

  • This object indicates the status of the operation instance.
  • enable(1): indicates that the operation instance is enabled.
  • disable(2): indicates that the operation instance is disabled.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.9

hwVpnCfgPingResultDetail

INTEGER

Read-only

This object indicates detailed results of the ping operation.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.10

hwVpnCfgPingRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.11

hwVpnCfgPingSecondary

INTEGER { primary(0), secondary(1), unknown(255)}

Read-create

The value of this object identifies that local pw is primary PW or secondary PW.
  • 0: primary PW
  • 1: secondary PW
  • 255: unknown

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.12

hwVpnCfgPingIfName

DisplayString

Read-create

This object indicates the name of AC interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.1.1.13

hwVpnCfgPingPwIdNew

Unsigned32

read-create

The value of this object identifies the PW-ID. This value is configured for the parameter only when the VPLS is in Martini mode. Otherwise, the value is 0.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

At most five entries can be created in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

To delete a probe in use, you need to first stop the probe through hwVPNCFGPingOperation.

Access Restriction

The entries in this table can be read without restriction.

hwVpnCfgPingResultTable

This table is used to create a VPN CFG ping instance and initiate a probe to check the consistence of configurations on both ends of the VPN.

The indexes of this table are hwVpnCfgPingIndex and hwVpnCfgPingResultLocation.

This table is used to read the result of the VPN CFG ping probe instance created in hwVPNCFGPingTable.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.2.2.1.1

hwVpnCfgPingResultLocation

Enumeration

Not-accessible

The value of this object identifies configuration information in the probe result.
  • local (1): indicates the local configuration information in the probe result.
  • remote (2): indicates the remote configuration information in the probe result.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.2

hwVpnCfgPingResultVpnIdType

INTEGER { martiniVPLS(1), kompellaVPLS(2), l3vpn(3), pwe3(4), martiniVLL(5), bgpadVPLS(6), unknown(255)}

read-only

This object indicates the type of the VPN flag. It is used to identify the value type of hwVPNCFGPingVPNID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.3

hwVpnCfgPingResultVpnId

DisplayString

read-only

This object indicates a VPN flag. The value is a string of characters.
  • If the VPN is in VPLS mode, the flag is displayed as VSI name.
  • If the VPN is in L3VPN mode, the flag is displayed as VPN instance.

It is invalid for PWE3 or Martini VLL.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.4

hwVpnCfgPingResultDesc

DisplayString

read-only

This object indicates the description of the VPN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.5

hwVpnCfgPingResultVpnAdminStatus

Enumeration

read-only

This object indicates the management status of the VPN.
  • up(1)
  • down(2)
  • unknown(255)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.6

hwVpnCfgPingResultOperStatus

Enumeration

read-only

This object indicates the running status of the VPN.
  • up(1)
  • down(2)
  • unknown(255)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.7

hwVpnCfgPingResultMtu

Integer32

read-only

The value of this object identifeis the MTU value. The default value is 0.

It is the MTU value of AC interface for PWE3 or Martini VLL and MTU value of VSI for VPLS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.8

hwVpnCfgPingResultCeCount

Integer32

read-only

The value of this object identifies the number of CEs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.9

hwVpnCfgPingResultActualIpType

InetAddressType

read-only

This object indicates the IP address type of the local PW. It is used to identify the value type of hwVPNCFGPingResultActualIP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.10

hwVpnCfgPingResultActualIp

InetAddress

read-only

This object indicates the IP address of the local PW.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.11

hwVpnCfgPingResultPeerIpType

InetAddressType

read-only

This object indicates the peer IP address type of the peer PW. It is used to identify the value type of hwVPNCFGPingResultPeerIP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.12

hwVpnCfgPingResultPeerIp

InetAddress

read-only

This object indicates the IP address of the peer PW.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.13

hwVpnCfgPingResultPwId

Unsigned32

read-only

The value of this object identifies the PW ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.14

hwVpnCfgPingResultPeType

Enumeration

read-only

This object indicates the type of the PE.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.15

hwVpnCfgPingResultVcType

HWL2VpnVcEncapsType

read-only

This object indicates the type of the VC, which is either Ether or VLAN.

This object indicates the type of the VC.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.16

hwVpnCfgPingResultLabelIn

Integer32

read-only

The value of this object identifies the incoming label of the interface at the PW side.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.17

hwVpnCfgPingResultLableOut

Integer32

read-only

The value of this object identifies the outgoing label of the interface at the PW side.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.18

hwVpnCfgPingResultControlWord

INTEGER { disable(0), enable(1), unknown(255) }

read-only

The value of this object identifies that if the keyword control-word is configured.
  • 0: disable
  • 1: enable
  • 255: unknown

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.19

hwVpnCfgPingResultPriOrSec

INTEGER { primary(0), secondary(1), unknown(255) }

read-only

The value of this object identifies that local pw is primary PW or secondary PW.
  • 0: primary PW
  • 1: secondary PW
  • 255: unknown

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.20

hwVpnCfgPingResultVplsID OCTET STRING read-only This object indicates the VPLS ID. It takes effect only in the BGP AD VPLS scenario.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.21

hwVpnCfgPingResultRD OCTET STRING read-only This object indicates the Route Distinguisher (RD). It takes effect only in the BGP AD VPLS scenario.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.2.1.22

hwVpnCfgPingResultPwIdNew

Unsigned32

read-only

The value of this object identifies the PW ID.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwVpnCfgPingResultIRtTable

This table is used to read the import VPN target value that is obtained through the service ping operation on the BGP AD VPLS network.

The indexes of this table are hwVpnCfgPingIndex, hwVpnCfgPingResultLocation, and hwVpnCfgPingResultIRtIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.2.4.1.1

hwVpnCfgPingResultIRtIndex

Integer32

Not-accessible

This object indicates the index of the import VPN target value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.4.1.2

hwVpnCfgPingResultIRt

OCTET STRING

Read-only

This object indicates the import VPN target value.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The import VPN target value can be obtained through the service ping operation only in the BGP AD VPLS scenario.

hwVpnCfgPingResultERtTable

This table is used to read the export VPN target value that is obtained through the service ping operation on the BGP AD VPLS network.

The indexes of this table are hwVpnCfgPingIndex, hwVpnCfgPingResultLocation, and hwVpnCfgPingResultERtIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.172.2.5.1.1

hwVpnCfgPingResultERtIndex

Integer32

Not-accessible

This object indicates the index of the export VPN target value.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.172.2.5.1.2

hwVpnCfgPingResultERtName

OCTET STRING

Read-only

This object indicates the value of the export VPN target.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The export VPN target value can be obtained through the service ping operation only in the BGP AD VPLS scenario.

Description of Alarm Objects

This MIB does not contain alarm objects.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178290

Views: 882542

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next