No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-RSVPTE-MIB

HUAWEI-RSVPTE-MIB

Functions Overview

This MIB is mainly used to query the information of RSVP-TE.

Root directory:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwRsvpTe(148)

Relationship Between Tables

Figure 106-1  Relationship between the hwRsvpTeSessionTable and other tables

Figure 106-1 shows the relationship between the hwRsvpTeSessionTable and related tables: the hwRsvpTeSenderTable, the hwRsvpTeResvFwdTable, the hwRsvpTeResvTable, the hwRsvpTeFilterSpecTable, the hwRsvpTeRroTable, and the hwRsvpTeEroTable. All the related tables depend on the hwRsvpTeSessionTable. All the tables above use hwRsvpTeSessionNumber as one of their indexes.

Figure 106-2  Relationship between the hwRsvpTeSenderTable and other tables

Figure 106-2 shows the relationship between the hwRsvpTeSenderTable and the related tables: the hwRsvpTeSessionTable and the hwRsvpTeEroTable. The hwRsvpTeSenderTable depends on the hwRsvpTeSessionTable. The hwRsvpTeEroTable depends on the hwRsvpTeSenderTable.

Figure 106-3  Relationship between the hwRsvpTeResvTable and other tables

Figure 106-3 shows the relationship between the hwRsvpTeResvTable and the related tables. The hwRsvpTeResvTable depends on the hwRsvpTeSessionTable. Both the hwRsvpTeFilterSpecTable and the hwRsvpTeRroTable depend on the hwRsvpTeResvTable.

Figure 106-4  Relationships among the ifTable, the hwRsvpTeIfTable, the hwRsvpTeIfNbrTable, and the hwRsvpTeMessageIdTable

Figure 106-4 shows the relationships among the ifTable, the hwRsvpTeIfTable, the hwRsvpTeIfNbrTable, and the hwRsvpTeMessageIdTable. The ifTable is an external table of IF-MIB. All the other tables shown above depend on the ifTable. The hwRsvpTeMessageIdTable depends on the hwRsvpTeIfNbrTable and the ifTable.

Figure 106-5  Relationships between the hwRsvpTeFilterSpecTable and other tables

Figure 106-5 shows the relationship between the hwRsvpTeFilterSpecTable and other tables. The hwRsvpTeFilterSpecTable depends on the hwRsvpTeResvTable and the hwRsvpTeSessionTable. The hwRsvpTeRroTable depends on the hwRsvpTeFilterSpecTable.

Figure 106-6  Relationships between the hwRsvpTeRroTable and other tables

Figure 106-6 shows the relationship between the hwRsvpTeRroTable and other tables. The hwRsvpTeRroTable depends on all the other tables.

Figure 106-7  Relationships between the hwRsvpTeEroTable and other tables

Figure 106-7 shows the relationship between the hwRsvpTeEroTable and other tables. The hwRsvpTeEroTable depends on the hwRsvpTeSessionTable and the hwRsvpTeSenderTable.

Description of Single Objects

hwRsvpTeNbr

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.1.1

hwRsvpTeNbr

IpAddress

accessible-for-notify

IP address of RSVP neighbour.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrCurrentCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.1.2

hwRsvpTeIfNbrCurrentCount

Integer32

Accessible-for-notify

The value of this object identifies the number of existing RSVP neighbors.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrThreshold

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.1.3

hwRsvpTeIfNbrThreshold

Integer32

Accessible-for-notify

The value of this object identifies the upper alarm threshold for proportion of configured RSVP neighbors to supported RSVP neighbor.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrTotalCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.1.4

hwRsvpTeIfNbrTotalCount

Integer32

Accessible-for-notify

The value of this object identifies the maximum number of RSVP neighbors that a device supports.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfName

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.1.5

hwRsvpTeIfName

OctetString

Accessible-for-notify

This object indicates the name of an RSVP interface.

This object is implemented as defined in the corresponding MIB file.

Description of MIB Tables

hwRsvpTeSessionTable

This table specifies all sessions seen by a given system.

The index of the table is hwRsvpTeSessionNumber.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.1.1.1

hwRsvpTeSessionNumber

Gauge32

Not-accessible

The number of this session. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.2

hwRsvpTeSessionType

SessionType

Read-only

The type of session (IPv4, IPv6, IPv6 with flow information, etc).

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.1.1.3

hwRsvpTeSessionDestAddr

OCTET STRING

Read-only

The destination address used by all senders in this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.4

hwRsvpTeSessionDestAddrLength

Integer32

Read-only

The CIDR prefix length of the session address, which is 32 for IPv4 host and multicast addresses, and 128 for IPv6 addresses. This object may not be changed when the value of the RowStatus object is 'active'.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.1.1.5

hwRsvpTeSessionSenders

Gauge32

Read-only

The number of distinct senders currently known to be part of this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.6

hwRsvpTeSessionReceivers

Gauge32

Read-only

The number of reservations being requested of this system for this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.7

hwRsvpTeSessionRequests

Gauge32

Read-only

The number of reservation requests this system is sending upstream for this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.8

hwRsvpTeSessionTunnelId

Integer32

Read-only

A 16-bit identifier used in the SESSION that remains constant over the life of the tunnel.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.9

hwRsvpTeSessionTunnelExtId

IpAddress

Read-only

An identifier used in the SESSION that remains constant over the life of the tunnel. Normally the identifier is set to all zeros. Ingress nodes that wish to narrow the scope of a SESSION to the ingress-egress pair may place their IPv4 address here as a globally unique identifier.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.10

hwRsvpTeSessionLspsNumber

Gauge32

Read-only

The number of LSPs that belong to this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.1.1.11

hwRsvpTeSessionStyle

INTEGER

Read-only

An enumerable value to identify the treatment of reservations for different senders within the same session: WF 10001b, FF01010b, SE 10010b.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, TE tunnel must be created.

hwRsvpTeSenderTable

This table describes the state information displayed by senders in PATH messages.

The indexes of the table are hwRsvpTeSessionNumber and hwRsvpTeSenderNumber.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.2.1.1

hwRsvpTeSenderNumber

Gauge32

Not-accessible

The number of this sender. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.2

hwRsvpTeSenderType

SessionType

Read-only

The type of session (IPv4, IPv6, IPv6 with flow information, etc).

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.2.1.3

hwRsvpTeSenderDestAddr

OCTET STRING

Read-only

The destination address used by all senders in this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.4

hwRsvpTeSenderAddr

OCTET STRING

Read-only

The source address used by this sender in this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.5

hwRsvpTeSenderDestAddrLength

Integer32

Read-only

The length of the destination address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hosts and multicast addresses.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.2.1.6

hwRsvpTeSenderAddrLength

Integer32

Read-only

The length of the sender's address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hosts and multicast addresses.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.2.1.7

hwRsvpTeSenderHopAddr

OCTET STRING

Read-only

The address used by the previous RSVP hop (which may be the original sender).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.8

hwRsvpTeSenderHopLih

Integer32

Read-only

The Logical Interface Handle used by the previous RSVP hop (which may be the original sender).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.9

hwRsvpTeSenderInterface

integer32

Read-only

The ifIndex value of the interface on which this PATH message was most recently received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.10

hwRsvpTeSenderTSpecRate

BitRate

Read-only

The Average Bit Rate of the senders data stream. Within a transmission burst, the arrival rate may be as fast as hwRsvpTeSenderTSpec-PeakRate (if supported by the service model); however, averaged across two or more burst intervals, the rate should not exceed hwRsvpTeSenderTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.11

hwRsvpTeSenderTSpecPeakRate

BitRate

Read-only

The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.12

hwRsvpTeSenderTSpecBurst

BurstSize

Read-only

The size of the largest burst expected from the sender at a time.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.13

hwRsvpTeSenderTSpecMinTu

MessageSize

Read-only

The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.14

hwRsvpTeSenderTSpecMaxTu

MessageSize

Read-only

The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.15

hwRsvpTeSenderInterval

Integer32

Read-only

The interval between refresh messages as advertised by the Previous Hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.16

hwRsvpTeSenderRsvpHop

TruthValue

Read-only

If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node believes that the previous IP hop may not be an RSVP hop.

The value is always set as True.

1.3.6.1.4.1.2011.5.25.148.1.2.1.18

hwRsvpTeSenderAdspecBreak

TruthValue

Read-only

The global break bit general characterization parameter from the ADSPEC. If TRUE, at least one non-IS hop was detected in the path. If FALSE, no non-IS hops were detected.

The value is always set as True.

1.3.6.1.4.1.2011.5.25.148.1.2.1.19

hwRsvpTeSenderAdspecHopCount

Integer32

Read-only

The hop count general characterization parameter from the ADSPEC. A return of zero or no Such Value indicates one of the following conditions: the invalid bit was set or the parameter was not present.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.20

hwRsvpTeSenderAdspecPathBw

BitRate

Read-only

The path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.21

hwRsvpTeSenderAdspecMinLatency

Integer32

Read-only

The minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.22

hwRsvpTeSenderAdspecMtu

Integer32

Read-only

The composed maximum transmission unit, general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.23

hwRsvpTeSenderAdspecGuaranteedSvc

TruthValue

Read-only

If TRUE, the ADSPEC contains a Guaranteed Service fragment. If FALSE, the ADSPEC does not contain a Guaranteed Service fragment.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.24

hwRsvpTeSenderAdspecGuaranteedBreak

TruthValue

Read-only

If TRUE, the Guaranteed Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the guaranteed service. If FALSE, and hwRsvpTeSen-derAdspecGuaranteedSvc is TRUE, the 'break' bit is not set. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns FALSE or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.25

hwRsvpTeSenderAdspecGuaranteedCtot

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'C' parameter. A return of zero or SuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present .If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.26

hwRsvpTeSenderAdspecGuaranteedDtot

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, This is the end-to-end composed value for the guaranteed service 'D' parameter. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.27

hwRsvpTeSenderAdspecGuaranteedCsum

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed service 'C' parameter since the last reshaping point. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.28

hwRsvpTeSenderAdspecGuaranteedDsum

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed service 'D' parameter since the last reshaping point. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.29

hwRsvpTeSenderAdspecGuaranteedHopCount

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.30

hwRsvpTeSenderAdspecGuaranteedPathBw

BitRate

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.31

hwRsvpTeSenderAdspecGuaranteedMinLatency

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC.

A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.32

hwRsvpTeSenderAdspecGuaranteedMtu

Integer32

Read-only

If hwRsvpTeSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the com-posed Maximum Transmission Unit general charac-terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecGuaranteedSvc is FALSE, this returns zero or noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.33

hwRsvpTeSenderAdspecCtrlLoadSvc

TruthValue

Read-only

If TRUE, the ADSPEC contains a Controlled Load Service fragment. If FALSE, the ADSPEC does not contain a Controlled Load Service fragment.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.34

hwRsvpTeSenderAdspecCtrlLoadBreak

TruthValue

Read-only

If TRUE, the Controlled Load Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the controlled load service. If FALSE, and hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, the 'break' bit is not set. If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns FALSE or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.35

hwRsvpTeSenderAdspecCtrlLoadHopCount

Integer32

Read-only

If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC.A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.36

hwRsvpTeSenderAdspecCtrlLoadPathBw

BitRate

Read-only

If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.37

hwRsvpTeSenderAdspecCtrlLoadMinLatency

Integer32

Read-only

If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.38

hwRsvpTeSenderAdspecCtrlLoadMtu

Integer32

Read-only

If hwRsvpTeSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac-terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set or the parameter was not present. If hwRsvpTeSenderAdspecCtrlLoadSvc is FALSE, this returns zero or noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.39

hwRsvpTeSenderTtl

Integer32

Read-only

The TTL value in the RSVP header that was last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.40

hwRsvpTeLspId

Integer32

Read-only

A 16-bit identifier used in the SENDER_TEMPLATE and the FILTER_SPEC that can be changed to allow a sender to share resources with itself.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.41

hwRsvpTeSenderMsgIdSndFlag

Integer32

Read-only

Indicates that the message sender requests the peer to send an acknowledgment for the message (1: ACK desired.).

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.42

hwRsvpTeSenderMsgIdSndEpoch

Gauge32

Read-only

A value that indicates when the Message_Identifier sequence has been reset.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.43

hwRsvpTeSenderMsgIdSndNumber

Gauge32

Read-only

When combined with the message generator's IP address, the Message_Identifier field uniquely identifies a message. The values placed in this field change incrementally and only decrease when the Epoch changes or when the value wraps. A return of 0 indicates the absence of the MESSAGE_ID object to be sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.44

hwRsvpTeSenderMsgIdRcvFlag

Integer32

Read-only

The messageId flag of the message latest received. It is used to identify whether ACK is desired or not. And it can be extended. (1: ACK desired.)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.45

hwRsvpTeSenderMsgIdRcvEpoch

Gauge32

Read-only

The messageId Epoch of the message latest received form the interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.46

hwRsvpTeSenderMsgIdRcvNumber

Gauge32

Read-only

The message ID number of the message latest received form the interface. A return of 0 indicates the absence of the MESSAGE_ID object received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.47

hwRsvpTeSenderClassType

Integer32

Read-only

Indicates the class-type. A return of zero indicates the absence of the object.

It is always 0.

1.3.6.1.4.1.2011.5.25.148.1.2.1.48

hwRsvpTeSenderLabelRequestCtype

INTEGER

Read-only

The type of label request (without label range, with ATM label range, with frame relay label range, etc).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.49

hwRsvpTeSenderLabelRequestL3pid

Integer32

Read-only

An identifier of the layer 3 protocol using this path. Standard Ethertype values are used.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.50

hwRsvpTeSenderLabelRequestAtmMinVpi

Integer32

Read-only

This 12 bit field specifies the lower bound of a block of Virtual Path Identifiers that is supported on the originating switch.

If the VPI is less than 12-bits it MUST be right justified in this field and preceding bits MUST be set to zero.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.51

hwRsvpTeSenderLabelRequestAtmMinVci

Integer32

Read-only

This 16 bit field specifies the lower bound of a block of Virtual Connection Identifiers that is supported on the originating switch.

If the VCI is less than 16-bits it MUST be right justified in this field and preceding bits MUST be set to zero.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.52

hwRsvpTeSenderLabelRequestAtmMaxVpi

Integer32

Read-only

This 12 bit field specifies the upper bound of a block of Virtual Path Identifiers that is supported on the originating switch.

If the VPI is less than 12-bits it MUST be right justified in this field and preceding bits MUST be set to zero.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.53

hwRsvpTeSenderLabelRequestAtmMaxVci

Integer32

Read-only

This 16 bit field specifies the upper bound of a block of Virtual Connection Identifiers that is supported on the originating switch.

If the VCI is less than 16-bits it MUST be right justified in this field and preceding bits MUST be set to zero.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.54

hwRsvpTeSenderLabelRequestFRMinDlci

Integer32

Read-only

This 23-bit field specifies the lower bound of a block of Data Link Connection Identifiers (DLCIs) that is supported on the originating switch.

The DLCI MUST be right justified in this field and unused bits MUST be set to 0.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.55

hwRsvpTeSenderLabelRequestFRMaxDlci

Integer32

Read-only

This 23-bit field specifies the upper bound of a block of Data Link Connection Identifiers (DLCIs) that is supported on the originating switch.

The DLCI MUST be right justified in this field and unused bits MUST be set to 0.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.56

hwRsvpTeSenderSessionAttrType

INTEGER

Read-only

The type of the session_attribute (without resource affinities or with resource affinities).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.57

hwRsvpTeSenderSessionAttrSetupPrio

Integer32

Read-only

The priority of the session with respect to taking resources, in the range of 0 to 7.

The value 0 is the highest priority. The Setup Priority is used in deciding whether this session can preempt another session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.58

hwRsvpTeSenderSessionAttrHoldPrio

Integer32

Read-only

The priority of the session with respect to holding resources, in the range of 0 to 7.

The value 0 is the highest priority. Holding Priority is used in deciding whether this session can be preempted by another session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.59

hwRsvpTeSenderSessionAttrFlag

Integer32

Read-only

A mixed value.

  • 0x01: Local protection desired;
  • 0x02: Label storing desired
  • 0x04: SE Style desired;
  • 0x08: bandwidth protection desired;
  • 0x10: node protection desired;
  • 0x20: Path re-evaluation request;
  • 0x40: Soft preemption desired
The following values are not supported:
  • 0x20: Path re-evaluation request;
  • 0x40: Soft preemption desired

1.3.6.1.4.1.2011.5.25.148.1.2.1.60

hwRsvpTeSenderSessionAttrName

OCTET STRING

Read-only

Session name, a null padded string of characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.61

hwRsvpTeSenderSessionAttrExcludeAny

Gauge32

Read-only

A 32-bit vector representing a set of attribute filters associated with a tunnel any of which renders a link unacceptable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.62

hwRsvpTeSenderSessionAttrIncludeAny

Gauge32

Read-only

A 32-bit vector representing a set of attribute filters associated with a tunnel any of which renders a link acceptable (with respect to this test).

A null set (all bits set to zero) automatically passes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.63

hwRsvpTeSenderSessionAttrIncludeAll

Gauge32

Read-only

A 32-bit vector representing a set of attribute filters associated with a tunnel all of which must be present for a link to be acceptable (with respect to this test).

A null set (all bits set to zero) automatically passes.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.64

hwRsvpTeSenderFrrSetupPrio

Integer32

Read-only

The priority of the backup path with respect to taking resources, in the range 0 to 7. The value 0 is the highest priority.

Setup Priority is used in deciding whether this session can preempt another session.

See [RSVP-TE] for the usage on priority.

FAST_REROUTE object only supports Auto-Frr.

1.3.6.1.4.1.2011.5.25.148.1.2.1.65

hwRsvpTeSenderFrrHoldPrio

Integer32

Read-only

The priority of the backup path with respect to holding resources, in the range 0 to 7. The value 0 is the highest priority.

Holding Priority is used in deciding whether this session can be preempted by another session.

FAST_REROUTE object only supports Auto-Frr.

1.3.6.1.4.1.2011.5.25.148.1.2.1.66

hwRsvpTeSenderFrrHopLimit

Integer32

Read-only

The maximum number of extra hops the backup path is allowed to take, from current node (a PLR) to an MP, with PLR and MP excluded from the count.

For example, hop-limit of 0 means that only direct links between PLR and MP can be considered.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.67

hwRsvpTeSenderFrrFlag

INTEGER

Read-only

An enumerable value to indicate the protection schema desired.

  • 0x01, One-to-One Backup Desired;
  • 0x02, Facility Backup Desired;
  • 0x03, No Backup Desired.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.68

hwRsvpTeSenderFrrBandwidth

BitRate

Read-only

Bandwidth estimate; 32-bit IEEE floating point integer, in bits per second.

FAST_REROUTE object only supports Auto-Frr.

1.3.6.1.4.1.2011.5.25.148.1.2.1.69

hwRsvpTeSenderFrrExcludeAny

Gauge32

Read-only

A 32-bit vector representing a set of attribute filters associated with a backup path, any of which renders a link unacceptable.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.70

hwRsvpTeSenderFrrIncludeAny

Gauge32

Read-only

A 32-bit vector representing a set of attribute filters associated with a backup path, any of which renders a link acceptable (with respect to this test).

A null set (all bits set to zero) automatically passes.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.71

hwRsvpTeSenderFrrIncludeAll

Gauge32

Read-only

A 32-bit vector representing a set of attribute filters associated with a backup path, all of which must be present for a link to be acceptable (with respect to this test).

A null set (all bits set to zero) automatically passes.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.2.1.72

hwRsvpTeSenderFrrInuseFlag

INTEGER

Read-only

An enumerable value to indicate the fast-reroute state of this sender (normal, PLR in use, MP in use, PLR in use and MP in use, under protection).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.2.1.73

hwRsvpTeSenderDiffServPsc

Integer32

Read-only

This 16 bits field indicates a PHB Scheduling Class to be supported by the LSP.

The value is always set as 0.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, session must exist.

hwRsvpTeResvTable

Information describing the state information displayed by receivers in RESV messages.

The indexes of the table are hwRsvpTeSessionNumber and hwRsvpTeResvNumber.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.3.1.1

hwRsvpTeResvNumber

Gauge32

Not-accessible

The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.2

hwRsvpTeResvType

SessionType

Read-only

The type of session (IPv4, IPv6, IPv6 with flow information, etc)

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.3.1.3

hwRsvpTeResvDestAddr

OCTET STRING

Read-only

The destination address used by all senders in this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.4

hwRsvpTeResvSenderAddr

OCTET STRING

Read-only

The source address of the sender selected by this reservation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.5

hwRsvpTeResvDestAddrLength

Integer32

Read-only

The length of the destination address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hosts and multicast addresses.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.3.1.6

hwRsvpTeResvSenderAddrLength

Integer32

Read-only

The length of the sender's address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hostsand multicast addresses.

The value is always set as 32.

1.3.6.1.4.1.2011.5.25.148.1.3.1.7

hwRsvpTeResvHopAddr

OCTET STRING

Read-only

The address used by the next RSVP hop (which may be the ultimate receiver)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.8

hwRsvpTeResvHopLih

Integer32

Read-only

The Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.9

hwRsvpTeResvInterface

Integer32

Read-only

The ifIndex value of the interface on which this RESV message was most recently received

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.10

hwRsvpTeResvService

QosService

Read-only

The QoS Service classification requested by the receiver.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.11

hwRsvpTeResvTSpecRate

BitRate

Read-only

The Average Bit Rate of the sender's data stream. Within a transmission burst, the arrival rate may be as fast as hwRsvpTeResvTSpecPeakRate (if supported by the service model); however, averaged across two or more burst intervals, the rate should not exceed hwRsvpTeResvTSpecRate.

Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.12

hwRsvpTeResvTSpecPeakRate

BitRate

Read-only

The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.13

hwRsvpTeResvTSpecBurst

BurstSize

Read-only

The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pacing is at the network's option.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.3.1.14

hwRsvpTeResvTSpecMinTu

MessageSize

Read-only

The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.3.1.15

hwRsvpTeResvTSpecMaxTu

MessageSize

Read-only

The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.16

hwRsvpTeResvRSpecRate

BitRate

Read-only

If the requested service is Guaranteed, as specified by hwRsvpTeResvService, This is the clearing rate that is being requested. Otherwise, it is zero, or the agent may return noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.17

hwRsvpTeResvRSpecSlack

Integer32

Read-only

If the requested service is Guaranteed, as specified by hwRsvpTeResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.3.1.18

hwRsvpTeResvInterval

Integer32

Read-only

The interval between refresh messages as advertised by the Next Hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.20

hwRsvpTeResvShared

TruthValue

Read-only

If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.21

hwRsvpTeResvExplicit

TruthValue

Read-only

If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message.

The value is always set as false.

1.3.6.1.4.1.2011.5.25.148.1.3.1.22

hwRsvpTeResvRsvpHop

TruthValue

Read-only

If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node believes that the previous IP hop may not be an RSVP hop.

The value is always set as true.

1.3.6.1.4.1.2011.5.25.148.1.3.1.24

hwRsvpTeResvTtl

Integer32

Read-only

The TTL value in the RSVP header that was last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.3.1.25

hwRsvpTeResvConfirm

OCTET STRING

Read-only

Receiver's address.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, session must exist.

hwRsvpTeResvFwdTable

Information describing the state information displayed upstream in RESV messages.

The indexes of the table are hwRsvpTeSessionNumber and hwRsvpTeResvFwdNumber.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.4.1.1

hwRsvpTeResvFwdNumber

Gauge32

Not-accessible

The number of this reservation request. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.2

hwRsvpTeResvFwdType

SessionType

Read-only

The type of session (IPv4, IPv6, IPv6 with flow information, etc).

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.4.1.3

hwRsvpTeResvFwdDestAddr

OCTET STRING

Read-only

The destination address used by all senders in this session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.4

hwRsvpTeResvFwdSenderAddr

OCTET STRING

Read-only

The source address of the sender selected by this reservation. The value of all zeroes indicates 'all senders'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.5

hwRsvpTeResvFwdDestAddrLength

Integer32

Read-only

The length of the destination address in bits. This is the CIDR Prefix Length, which is 32 bits for IPv4 hosts and multicast addresses.

The value is 32.

1.3.6.1.4.1.2011.5.25.148.1.4.1.6

hwRsvpTeResvFwdSenderAddrLength

Integer32

Read-only

The length of the sender's address in bits. This is the CIDR Prefix Length, which for is 32 bits IPv4 hosts and multicast addresses.

The value is 32.

1.3.6.1.4.1.2011.5.25.148.1.4.1.7

hwRsvpTeResvFwdHopAddr

OCTET STRING

Read-only

The address of the (previous) RSVP that will receive this message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.8

hwRsvpTeResvFwdHopLih

Integer32

Read-only

The Logical Interface Handle sent to the (previous) RSVP that will receive this message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.9

hwRsvpTeResvFwdInterface

Integer32

Read-only

The ifIndex value of the interface on which this RESV message was most recently sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.10

hwRsvpTeResvFwdService

QosService

Read-only

The QoS Service classification requested.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.11

hwRsvpTeResvFwdTSpecRate

BitRate

Read-only

The Average Bit Rate of the sender's data stream. Within a transmission burst, the arrival rate may be as fast as hwRsvpTeResvFwdTSpec-PeakRate (if supported by the service model); however, averaged across two or more burst intervals, the rate should not exceed hwRsvpTeResvFwdTSpecRate.

Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.12

hwRsvpTeResvFwdTSpecPeakRate

BitRate

Read-only

The Peak Bit Rate of the sender's data stream Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.13

hwRsvpTeResvFwdTSpecBurst

INTEGER

Read-only

The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pacing is at the network's option.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.4.1.14

hwRsvpTeResvFwdTSpecMinTu

MessageSize

Read-only

The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.4.1.15

hwRsvpTeResvFwdTSpecMaxTu

MessageSize

Read-only

The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.16

hwRsvpTeResvFwdRSpecRate

BitRate

Read-only

If the requested service is Guaranteed, as specified by hwRsvpTeResvService, This is the clearing rate that is being requested. Otherwise, it is zero, or the agent may return noSuchValue.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.17

hwRsvpTeResvFwdRSpecSlack

Integer32

Read-only

If the requested service is Guaranteed, as specified by hwRsvpTeResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue.

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.4.1.18

hwRsvpTeResvFwdInterval

Integer32

Read-only

The interval between refresh messages advertised to the Previous Hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.20

hwRsvpTeResvFwdShared

TruthValue

Read-only

If TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.21

hwRsvpTeResvFwdExplicit

TruthValue

Read-only

If TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message.

The value is always set as false.

1.3.6.1.4.1.2011.5.25.148.1.4.1.22

hwRsvpTeResvFwdRsvpHop

TruthValue

Read-only

If TRUE, the node believes that the next IP hop is an RSVP hop. If FALSE, the node believes that the next IP hop may not be an RSVP hop.

The value is always set as true.

1.3.6.1.4.1.2011.5.25.148.1.4.1.24

hwRsvpTeResvFwdTtl

Integer32

Read-only

The TTL value in the RSVP header that was last received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.25

hwRsvpTeResvFwdMsgIdFlag

Integer32

Read-only

Indicates that the message sender requests the peer to send an acknowledgment for the message (1: ACK desired.).

The value is always set as constant.

1.3.6.1.4.1.2011.5.25.148.1.4.1.26

hwRsvpTeResvFwdMsgIdEpoch

Gauge32

Read-only

A value that indicates when the Message_Identifier sequence has been reset.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.4.1.27

hwRsvpTeResvFwdMsgIdNumber

Gauge32

Read-only

When combined with the message generator's IP address, the Message_Identifier field uniquely identifies a message. The values placed in this field change incrementally and only decrease when the Epoch changes or when the value wraps.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, session must exist.

hwRsvpTeIfTable

The RSVP-specific attributes of the system's interfaces.

The index of the table is ifIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.5.1.1

hwRsvpTeIfUdpNbrs

Gauge32

Read-only

The number of neighbors perceived to be using only the RSVP UDP Encapsulation.

The value is always set as 0.

1.3.6.1.4.1.2011.5.25.148.1.5.1.2

hwRsvpTeIfIpNbrs

Gauge32

Read-only

The number of neighbors perceived to be using only the RSVP IP Encapsulation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.3

hwRsvpTeIfNbrs

Gauge32

Read-only

The number of neighbors currently perceived; this will exceed hwRsvpTeIfIpNbrs + hwRsvpTeIfUdpNbrs by the number of neighbors using both encapsulations.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.4

hwRsvpTeIfRefreshBlockadeMultiple

Integer32

Read-only

The value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.5

hwRsvpTeIfRefreshMultiple

Integer32

Read-only

The value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.6

hwRsvpTeIfTtl

Integer32

Read-only

The value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means.

The value is always set as 16.

1.3.6.1.4.1.2011.5.25.148.1.5.1.7

hwRsvpTeIfRefreshInterval

TimeInterval

Read-only

The value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.8

hwRsvpTeIfRouteDelay

TimeInterval

Read-only

The approximate period from the time a route is changed to the time a resulting message appears on the interface.

The value is always set as 200.

1.3.6.1.4.1.2011.5.25.148.1.5.1.9

hwRsvpTeIfEnabled

TruthValue

Read-only

Its value is always TRUE, if RSVP is enabled on this Interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.10

hwRsvpTeIfUdpRequired

TruthValue

Read-only

If TRUE, manual configuration forces the use of UDP encapsulation on the interface. If FALSE, UDP encapsulation is only used if hwRsvpTeIfUdpNbrs is not zero.

The value is always set as false.

1.3.6.1.4.1.2011.5.25.148.1.5.1.11

hwRsvpTeIfStatus

RowStatus

Read-only

'Active' on interfaces that are configured for RSVP.

The value is always set as 1.

1.3.6.1.4.1.2011.5.25.148.1.5.1.12

hwRsvpTeIfHelloEnabled

TruthValue

Read-only

If TRUE, RSVPTE hello is enabled on this Interface. If FALSE, RSVPTE is not enabled on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.13

hwRsvpTeIfSrefreshEnabled

TruthValue

Read-only

If TRUE, Srefresh is enabled on this interface. If FALSE, Srefresh is not enabled on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.14

hwRsvpTeIfSrefreshInterval

TimeInterval

Read-only

Interval between two updates.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.15

hwRsvpTeIfRetranIncDelta

Integer32

Read-only

Delta governs the speed with which the sender increases the retransmission interval. The ratio of two successive retransmission intervals is (1 + Delta).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.16

hwRsvpTeIfRetranInterval

TimeInterval

Read-only

The retransmission interval.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.17

hwRsvpTeIfAuthEnabled

TruthValue

Read-only

If TRUE, Authentication is enabled on this Interface. If FALSE, Authentication is not enabled on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.18

hwRsvpTeIfAuthEncrypted

TruthValue

Read-only

This states that Authentication key is encrypted or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.19

hwRsvpTeIfAuthHandshake

TruthValue

Read-only

Handshaking is enabled authentications.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.20

hwRsvpTeIfAuthLifeTime

TimeInterval

Read-only

Authentication life time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.5.1.21

hwRsvpTeIfAuthKey

OCTET STRING (SIZE (0..392))

Read-only

Authentication key, used for authentication processing. For security purposes, a get on this returns a zero length string.

Currently, the value range of 1 to 64 is supported.

1.3.6.1.4.1.2011.5.25.148.1.5.1.22

hwRsvpTeIfWindowSize

Integer32

Read-only

Administrators can specify a message window corresponding to the worst case reordering behavior. For example, one might specify that packets reordered within a 32 message window would be accepted. If no reordering can occur, the window is set to one. The maximum value is 64.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, RSVP-TE must be enabled.

hwRsvpTeNbrTable

Information describes the Neighbors of an RSVP system.

The indexes of the table are ifIndex and hwRsvpTeNbrAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.6.1.1

hwRsvpTeNbrAddress

OCTET STRING

Not-accessible

The IPv4 or IPv6 Address used by this neighbor. This object may not be changed when the value of the Row Status object is 'active'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.2

hwRsvpTeNbrProtocol

INTEGER

Read-only

The encapsulation being used by this neighbor.

The value is always set as 1.

1.3.6.1.4.1.2011.5.25.148.1.6.1.3

hwRsvpTeNbrStatus

RowStatus

Read-only

'Active' for all neighbors. This object may be used to configure neighbors. In the presence of configured neighbors, the implementation may (but is not required to) limit the set of valid neighbors to those configured.

The value is always set as 1.

1.3.6.1.4.1.2011.5.25.148.1.6.1.4

hwRsvpTeNbrSendersNumber

Gauge32

Read-only

The number of senders on the Neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.5

hwRsvpTeNbrReceiversNumber

Gauge32

Read-only

The number of receivers on the Neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.6

hwRsvpTeNbrHelloEnabled

TruthValue

Read-only

If TRUE hello is enabled on the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.7

hwRsvpTeNbrHelloSrcInstance

Gauge32

Read-only

Source instance of the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.8

hwRsvpTeNbrHelloDstInstance

Gauge32

Read-only

Destination instance of the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.9

hwRsvpTeNbrHelloLostCounter

Gauge32

Read-only

The number of times the hello messages have been sent to the neighbor for which hello ACK has not received yet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.10

hwRsvpTeNbrHelloType

INTEGER

Read-only

Hello type that is being sent to the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.11

hwRsvpTeNbrGrCapability

Integer32

Read-only

Gives neighbor capability to support GR or undergo GR, in case of control plane restart. A mixed value.

  • 0x01: Self GR capability of neighbor;
  • 0x02: GR support capability of neighbor;
  • 0x04: Neighbor capable of receiving RecoveryPath message;
  • 0x08: Neighbor capable of sending RecoveryPath message.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.12

hwRsvpTeNbrGrRestartTime

TimeStamp

Read-only

Neighbor nodes GR restart time value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.13

hwRsvpTeNbrGrRecoveryTime

TimeStamp

Read-only

Neighbor nodes GR recovery time value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.14

hwRsvpTeNbrGrStatus

INTEGER

Read-only

Neighbor nodes GR status.

  • 0x01, No GR activity;
  • 0x02, Neighbor node is supporting GR;
  • 0x03, Neighbor node is restarting;
  • 0x04, Restart timer is running;
  • 0x05, Recovery timer is running;
  • 0x06, Neighbor GR end.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.15

hwRsvpTeNbrAuthKeyId

OCTET STRING

Read-only

Neighbor's authentication key, used for authentication processing. A return of null string indicates the absence of the item. For security purposes, a get on this returns a zero length string.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.16

hwRsvpTeNbrReductionEnabled

TruthValue

Read-only

If TRUE srefresh is enabled on the neighbor, else srefresh is not enabled on the neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.6.1.17

hwRsvpTeNbrReliabilityEnabled

TruthValue

Read-only

If TRUE reliability is enabled on the neighbor, else reliability is not enabled on the neighbor.

Since reliability is not configurable now, the value of hwRsvpTeNbrReliabilityEnabled will be set to be false under the following circumstances:
  • 1. when receiving the Path Error message or
  • when receiving the Resv Error message with Error Code 13 (Unknown object class) and Error Value 23 (MESSAGE_ID Class);
  • 3. when times of retransmission exceed three.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, RSVP-TE must be enabled.

hwRsvpTeMessageIdTable

Information describes the MessageIds of an RSVP system.

The indexes of the table are ifIndex, hwRsvpTeNbrAddress, hwRsvpTeMessageIdEpoch and hwRsvpTeMessageIdNumber.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.7.1.1

hwRsvpTeMessageIdEpoch

Gauge32

Not-accessible

A value that indicates when the Message_Identifier sequence has been reset.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.7.1.2

hwRsvpTeMessageIdNumber

Gauge32

Not-accessible

When combined with the message generator's IP address, the Message_Identifier field uniquely identifies a message. The values placed in this field change incrementally and only decrease when the Epoch changes or when the value wraps.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.7.1.3

hwRsvpTeMessageIdFlag

INTEGER

Read-only

An enumerable value to indicate the type of this Message_Identifier.

  • 1: SenderIncoming;
  • 2: SenderOutgoing;
  • 3: Resv;
  • 4: ResvFwd;
  • 5: Rtbuff

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, hwRsvpTeNbr must exist and Srefresh must be enabled.

hwRsvpTeFilterSpecTable

Information describes the FilterSpecs of an RSVP system.

The indexes of the table are hwRsvpTeSessionNumber, hwRsvpTeResvNumber and hwRsvpTeFilterSpecNumber.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.8.1.1

hwRsvpTeFilterSpecNumber

Gauge32

Not-accessible

The number of this Filter_Spec. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.8.1.2

hwRsvpTeFilterSpecLspId

Integer32

Read-only

A 16-bit identifier used in the SENDER_TEMPLATE and the FILTER_SPEC that can be changed to allow a sender to share resources with itself.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.8.1.3

hwRsvpTeFilterSpecIngressLsrId

OCTET STRING

Read-only

IP address for a sender node.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.8.1.4

hwRsvpTeFilterSpecLabel

Gauge32

Read-only

The value of the label arranged by next hop. A return of 4294967295 indicates the absence of the item.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, Resv must exist.

hwRsvpTeRroTable

Information describes the RRO sub-objects of an RSVP system.

The indexes of the table are hwRsvpTeSessionNumber, hwRsvpTeSenderNumber and hwRsvpTeRroNumber.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.9.1.1

hwRsvpTeRroNumber

Gauge32

Not-accessible

The number of this RRO sub-object. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.9.1.2

hwRsvpTeRroType

INTEGER

Read-only

An enumerable value that indicates the type of this sub-object.

  • 0x01: IPv4 address;
  • 0x02: IPv6 address;
  • 0x03: Label.

IPv4 and Label are supported. IPv6 is not supported.

1.3.6.1.4.1.2011.5.25.148.1.9.1.3

hwRsvpTeRroIpAddr

OCTET STRING

Read-only

IP address for this sub-object if the type is 'IPv4 address' of 'IPv6 address'. A return of null string indicates the absence of the item.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.9.1.4

hwRsvpTeRroIpPrefixLen

Integer32

Read-only

IP prefix length for this sub-object if the type is 'IPv4 address' of 'IPv6 address'. A return of 0 indicates the absence of the item.

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.9.1.5

hwRsvpTeRroLabel

Gauge32

Read-only

The value of the label if the type is 'Label'. A return of 4294967295 indicates the absence of the item.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.9.1.6

hwRsvpTeRroFlag

Integer32

Read-only

If hwRsvpTeRroType is IPv4 or IPv6, it is a mixed value.

  • 0x01: Local protection available;
  • 0x02: Local protection in use;
  • 0x04: bandwidth protection;
  • 0x08: node protection;
  • 0x10: preemption pending;
  • 0x20: node ID.

If hwRsvpTeRroType is Label, 0x01 means global label. A return of zero indicates no bit was set.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, Resv must exist.

hwRsvpTeEroTable

Information describes the Ero sub-objects of an RSVP system.

The indexes of the table are hwRsvpTeSessionNumber, hwRsvpTeSenderNumber and hwRsvpTeEroNumber.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.10.1.1

hwRsvpTeEroNumber

Gauge32

Not-accessible

The number of this ERO sub-object. This is for SNMP Indexing purposes only and has no relation to any protocol value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.10.1.2

hwRsvpTeEroType

INTEGER

Read-only

An enumerable value that indicates the type of this sub-object.

  • 0x01: IPv4 address;
  • 0x02: IPv6 address.

Only IPv4 is supported.

1.3.6.1.4.1.2011.5.25.148.1.10.1.3

hwRsvpTeEroIpAddr

OCTET STRING

Read-only

IP address for this sub-object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.148.1.10.1.4

hwRsvpTeEroIpPrefixLen

Integer32

Read-only

IP prefix length for this sub-object.

Only IPv4 is supported.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be modified.

Deletion Restriction

This table cannot be deleted.

Access Restriction

To access this table, Sender must exist.

Description of Alarm Nodes

hwRsvpTeHelloLost

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.1

hwRsvpTeHelloLost

hwRsvpTeNbr

Indicates neighbour of RSVP hello lost.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeHelloLostRecovery

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.2

hwRsvpTeHelloLostRecovery

hwRsvpTeNbr

Indicates neighbour of RSVP hello lost recovery.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeAuthFail

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.3

hwRsvpTeAuthFail

hwRsvpTeNbr

Indicates authentication of RSVP neighbour was wrong.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeAuthSuccess

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.4

hwRsvpTeAuthSuccess

hwRsvpTeNbr

Indicates authentication of RSVP neighbour was ok.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrThresholdExceed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.5

hwRsvpTeIfNbrThresholdExceed

  • hwRsvpTeIfName

  • hwRsvpTeIfNbrCurrentCount

  • hwRsvpTeIfNbrThreshold

  • hwRsvpTeIfNbrTotalCount

This object indicates that the proportion of configured RSVP neighbors to RSVP neighbors supported by a device reaches the upper threshold.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrThresholdExceedClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.6

hwRsvpTeIfNbrThresholdExceedClear

hwRsvpTeIfName

This object indicates that the proportion of configured RSVP neighbors to RSVP neighbors supported by a device falls below the lower threshold.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrTotalCountExceed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.7

hwRsvpTeIfNbrTotalCountExceed

  • hwRsvpTeIfName

  • hwRsvpTeIfNbrTotalCount

This object indicates that the number of configured RSVP neighbors on a device reaches the maximum number of RSVP neighbors supported by the device.

This object is implemented as defined in the corresponding MIB file.

hwRsvpTeIfNbrTotalCountExceedClear

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.148.1.12.2.8

hwRsvpTeIfNbrTotalCountExceedClear

hwRsvpTeIfName

This object indicates that the number of configured RSVP neighbors on a device falls below 95% of the maximum number of RSVP neighbors.

This object is implemented as defined in the corresponding MIB file.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178290

Views: 880834

Downloads: 58

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next