No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-RRPP-MIB

HUAWEI-RRPP-MIB

Functions Overview

HUAWEI-RRPP-MIB provides the following functions:

  • Configures the RRPP feature.

  • Collects the statistics of RRPP packets.

  • Sends Trap messages.

The OID of the root object is:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwRrpp(113).hwRrppTable(2)

Relationship Between the Tables

Figure 105-1  Relationship between domain table and ring table

hwRrppDomainTable is a domain table, and hwRrppRingTable is a ring table. One domain can correspond to a maximum of 64 rings.

hwRrppSnoopingInterfaceTable is the configuration table for the RRPP snooping interface. This table has no relation with other tables.hwRrppSnoopingVsiTable is the VSI configuration table associated with the RRPP snooping interface. This table has no relation with other tables.

Description of Single Objects

hwRrppEnableStatus

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.1.1

hwRrppEnableStatus

EnabledStatus

Read-write

The value of this object identifies whether RRPP is enabled.

The values are as follows:
  • 1: enable
  • 2: disable

This object is implemented as defined in the corresponding MIB files.

hwRrppLinkupDelayTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.1.2

hwRrppLinkupDelayTime

Integer32

Read-write

The switching delay for a blocked point on an RRPP link.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwRrppDomainTable

This table describes the information about the attributes of the RRPP domain.

The index of this table is hwRrppDomainID.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.2.1.1.1

hwRrppDomainID

INTEGER (1..64)

Not-accessible

The value of this object identifies the domain ID. The ID of the RRPP domain is an integer.

A set of interconnected switch clusters configured with the same domain ID and control VLAN constitute an RRPP domain.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.2

hwRrppDomainControlVlanID

Integer (1..4093 | 65535)

Read-create

The value of this object identifies the control VLAN ID. In comparison with the data VLAN, the control VLAN is used to transmit only the RRPP protocol packet in the RRPP domain. Each RRPP domain is configured with two control VLANs, that is, the major control VLAN and sub control VLAN.

During the configuration, specify only the major control VLAN, and the VLAN with the ID as the control VLAN ID plus one becomes the sub control VLAN. The value of the major control VLAN ranges from 1 to 4093 or 65535.

When the control VLAN is not configure, the value of this object is 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.3

hwRrppDomainHelloTime

Integer(1..10)

Read-create

The value of this object identifies the timeout period of the Hello timer. The value ranges from 1 to 10, expressed in seconds. The default value of this object is 1 second.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.4

hwRrppDomainFailTime

Integer (3..1200)

Read-create

The value of this object identifies the timeout period of the Fail timer. The value ranges from 3 to 1200, expressed in seconds. The default value of this object is 6 seconds. The value of this object cannot be smaller than the value that is three times the value of hwRrppDomainHelloTime.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.5

hwRrppDomainRowStatus

RowStatus

Read-create

The object indicates the row status of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.6

hwRrppDomainResetStatistics

Integer

Read-create

Clears the statistics of packets received and sent on the current domain.
  • cleared(1)

  • unused(2)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.8

hwRrppDomainProtectedVlan

OctetString min: 0 max: 49

Read-create

Information about the instances bound to the RRPP domain. Both the ID and the number of the instances can be obtained through the object.

NOTE:
The instance ID must be in the range of 0 to 48. This object cannot obtain IDs and number of instances with instance IDs out of this range. A maximum of 49 instances are supported. This object cannot obtain the IDs and number of excess instances.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.9

hwRrppDomainDescription

OCTET STRING (SIZE (0..255))

read-create

This object indicates the description of the RRPP domain.

The default value is null.

If the value is empty, the description of the RRPP domain is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.1.1.10

hwRrppDomainProtectedInstance

OCTET STRING (SIZE (0..512))

read-create

Information about the instances bound to the RRPP domain. The value ranges from 0 to 48. Both the ID and the number of the instances can be obtained through the object.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The specified control VLAN must be a VLAN that has not been created. The default ID is 65535.

Modification Restriction

The value of hwRrppDomainFailTime must be equal to or greater than three times the value of hwRrppDomainHelloTime.

Deletion Restriction

Before you delete a domain, make sure that no RRPP ring is configured in the domain. Otherwise, the domain cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwRrppRingTable

This table describes the information about the attributes of the RRPP ring.

The indexes of this table are hwRrppDomainID and hwRrppRingID.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.2.2.1.1

hwRrppRingID

INTEGER (1..64)

Not-accessible

The value of this object identifies the ID of an RRPP ring. Each RRPP ring maps a physical Ethernet network topology in the shape of a ring. Each RRPP ring is a part of the RRPP domain to which it belongs.

Actually, RRPP takes effect on the RRPP ring. The ring in the RRPP domain can be classified into the major ring and the sub-ring. The major ring and the sub-ring are distinguished by their configured levels. The level of the major ring is set to 0; the level of the sub-ring is set to 1.

The value ranges from 1 to 64.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.2

hwRrppRingEnableStatus

EnabledStatus

Read-create

The value of this object identifies whether the ring is enabled.

The values are as follows:

  • 1: enable
  • 2: disable

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.3

hwRrppRingActive

INTEGER

{

active(1),

inactive(2)

}

Read-only

The value of this object identifies whether the ring is activated. The values are as follows:

  • 1: active
  • 2: inactive

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.4

hwRrppRingState

INTEGER

{

unknown(1),

health(2),

fault(3),

complete(4),

failed(5),

linkup(6),

linkdown(7),

preforwarding(8),

linkupnotify(9),

linkdownnotify(10),

preforwardnotify(11)

}

Read-only

The value of this object identifies the status of the ring.

NOTE:

The values 2 and 3 are used only in traps.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.5

hwRrppRingNodeMode

INTEGER

{

master(1),

transit(2),

edge(3),

assistantEdge(4)

}

Read-create

The value of this object identifies the mode of the RRPP node. The values are as follows:

  • 1: master
  • 2: transit
  • 3: edge
  • 4: assistantEdge

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.6

hwRrppRingPrimaryPort

InterfaceIndex

Read-create

This object indicates the index of the main interface. When the node is an edge node or an assistant edge node, it indicates the index of the public interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.7

hwRrppRingSecondaryPort

InterfaceIndex

Read-create

This object indicates the index of the secondary interface. When the node is an edge node or an assistant edge node, it indicates the index of the edge interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.8

hwRrppRingLevel

Integer

{

majorRing(0),

subRing(1)

}

Read-create

The value of this object identifies the level of the ring.

The values are as follows:

  • 0: major ring
  • 1: sub-ring

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.9

hwRrppRingRowStatus

RowStatus

Read-create

The object indicates the row status of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.2.1.10

hwRrppRingResetStatistics

Integer

Read-create

The object indicates clearing the statistics of packets received and sent on the current ring.
  • cleared(1)

  • unused(2)

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The switch on the major ring of the RRPP domain can serve as a master node or a transit node. The switch on the sub-ring can serve as a master node, a transit node, an edge node, or an assistant edge node.

The sub-ring can be created on the following conditions:

  • When the node is an edge node or an assistant edge node, the public interface of the sub-ring is the interface shared with the major ring.

Modification Restriction

The switch on the major ring of the RRPP domain can serve as a master node or a transit node. The switch on the sub-ring can serve as a master node, a transit node, an edge node, or an assistant edge node.

Deletion Restriction

When deleting a ring, make sure that the ring is disabled; otherwise, the ring cannot be deleted.

Before you delete the major ring, make sure that the sub-ring is deleted. Otherwise, the major ring cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwRrppPortTable

This table describes information about the configuration table of the RRPP interface, including the configuration, status, and traffic statistics of the RRPP interface.

The index of this table is hwRrppPortID.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.2.3.1.1

hwRrppPortID

InterfaceIndex

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.2

hwRrppPortType

INTEGER

{

fe(1),

ge(2),

ve(3),

ethtrunk(4),

xge(5),

40ge(6),

100ge(7)

}

Read-only

The value of this object identifies the port type. The values are as follows:
  • 1: FE
  • 2: GE
  • 3: VE
  • 4: Eth-trunk
  • 5: XGE
  • 6: 40GE
  • 7: 100GE

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.3

hwRrppPortRole

INTEGER

{

primary(1),

secondary(2),

common(3),

edge(4)

}

Read-only

The value of this object identifies the interface role.

The values are as follows:
  • 1: primary
  • 2: secondary
  • 3: common
  • 4: edge

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.4

hwRrppPortState

INTEGER

{

unknown(1),

unblocked(2),

blocked(3),

down(4)

}

Read-only

The value of this object identifies the port status. The values are as follows:
  • 1: unknown
  • 2: unblocked
  • 3: blocked
  • 4: down

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.5

hwRrppPortRXError

Counter32

Read-only

The object indicates the number of invalid RRPP protocol packets received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.6

hwRrppPortRXHello

Counter32

Read-only

The object indicates the number of Hello messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.7

hwRrppPortRXLinkUp

Counter32

Read-only

The object indicates the number of LINK-UP messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.8

hwRrppPortRXLinkDown

Counter32

Read-only

The object indicates the number of LINK-DOWN messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.9

hwRrppPortRXCommonFlush

Counter32

Read-only

The object indicates the number of COMMON-FLUSH-FDB messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.10

hwRrppPortRXCompleteFlush

Counter32

Read-only

The object indicates the number of COMPLETE-FLUSH-FDB messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.11

hwRrppPortRXEdgeHello

Counter32

Read-only

The object indicates the number of EDGE-HELLO messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.12

hwRrppPortRXMajorFault

Counter32

Read-only

The object indicates the number of MAJOR-FAULT messages received by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.13

hwRrppPortTXError

Counter32

Read-only

The object indicates the number of RRPP protocol packets that fail to be sent by this RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.14

hwRrppPortTXHello

Counter32

Read-only

The object indicates the number of Hello messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.15

hwRrppPortTXLinkUp

Counter32

Read-only

The object indicates the number of LINK-UP messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.16

hwRrppPortTXLinkDown

Counter32

Read-only

The object indicates the number of LINK-DOWN messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.17

hwRrppPortTXCommonFlush

Counter32

Read-only

The object indicates the number of COMMON-FLUSH-FDB messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.18

hwRrppPortTXCompleteFlush

Counter32

Read-only

The object indicates the number of COMPLETE-FLUSH-FDB messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.19

hwRrppPortTXEdgeHello

Counter32

Read-only

The object indicates the number of Edge-Hello messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.2.3.1.20

hwRrppPortTXMajorFault

Counter32

Read-only

The object indicates the number of MAJOR-FAULT messages sent by the RRPP interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwRrppRingGroupTable

This table describes information status of an RRPP ring group.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.2.5.1.1

hwRrppRingGroupID

Integer32

not-accessible

The value of this object identifies an RRPP ring group ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.113.2.5.1.2

hwRrppRingGroupRowStatus

RowStatus

read-create

This object indicates the row status of an RRPP ring group configuration table.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

You can delete entries in this table.

Access Restriction

The entries in this table can be read without restraint.

hwRrppRingGroupMemberTable

This table describes information status of sub-rings in an RRPP ring group.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.2.6.1.1

hwRrppRingGroupMemberDomainID

Integer32

Not-accessible

The value of this object identifies the domain ID of a sub-ring added to an RRPP ring group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.113.2.6.1.2

hwRrppRingGroupMemberRingID

Integer32

Not-accessible

The value of this object identifies the ring ID of a sub-ring added to an RRPP ring group.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.113.2.6.1.3

hwRrppRingGroupIsEdgeHelloProcess

EnabledStatus

Read-only

This object indicates the flag carried in the Edge-Hello packet sent by a sub-ring.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.113.2.6.1.4

hwRrppRingGroupMemberRowStatus

RowStatus

Read-create

This object indicates the configuration table's row status of a sub-ring in an RRPP ring group.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table. Nodes on sub-rings in a ring group must be either edge nodes or assistant edge nodes. Meanwhile, these sub-rings must use identical Hello timers and identical Fail timers. To add an activated sub-ring to a ring group, you must first add it on an assistant edge node and then add it on an edge node.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted. To delete an activated sub-ring from a ring group, you must first delete it on an assistant edge node and then delete it on an edge node.

Access Restriction

The entries in this table can be read.

hwRrppSnoopingInterfaceTable

This table is the configuration table for the RRPP snooping interface. The table can realize the enabling or disabling of the RRPP snooping function on the interface.

The index of this table is hwRrppSnoopingInterfaceId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.3.1.1.1

hwRrppSnoopingInterfaceId

InterfaceIndex

Not-accessible

This object indicates the index of the RRPP snooping interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.1.1.2

hwRrppSnoopingVsiName

OCTET STRING

Read-only

This object indicates the name of the VSI bound to the RRPP snooping interface. The name is a case-sensitive string of 1 to 31 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.1.1.3

hwRrppSnoopingVlanId

VlanId

Read-only

This object indicates the VLAN ID of the RRPP snooping interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.1.1.4

hwRrppSnoopingEnableStatus

EnabledStatus

Read-create

This object indicates the enabling flag of the RRPP snooping function.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.1.1.5

hwRrppSnoopingRowStatus

RowStatus

Read-create

This object indicates the row status of the configuration table for the RRPP snooping interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.1.1.6

hwRrppSnoopingAllVsiStatus

EnabledStatus

Read-create

This object indicates the status of all VSI configuration that is associated with the RRPP snooping interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The configuration of VPLS must exist on the interface.

Modification Restriction

To delete the configuration of VPLS on the interface and reconfigure VPLS, enable the RRPP snooping function again.

Deletion Restriction

The VPLS configuration is deleted on the interface, and the RRPP snooping function is disabled.

Reading Restriction

The entries in this table can be read without restraint.

hwRrppSnoopingVsiTable

This table is used to associate the VSI configuration table for the RRPP snooping interface. The table can realize the association of a VSI with the interface.

The indexes of this table are hwRrppSnoopingVsiInterfaceId and hwVsiName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.3.2.1.1

hwRrppSnoopingVsiInterfaceId

InterfaceIndex

Not-accessible

This object indicates the index of the RRPP snooping interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.2.1.2

hwVsiName

OCTET STRING

Not-accessible

This object indicates the VSI name associated with the RRPP snooping interface. The object is a case-sensitive string that ranges from 1 to 31 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.113.3.2.1.3

hwRrppSnoopingVsiRowStatus

RowStatus

Read-create

This object indicates the row status of the VSI configuration table that is associated with the RRPP snooping interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The VSI must already exist, and the RRPP snooping function must be already enabled.

Modification Restriction

None

Deletion Restriction

The VSI is deleted, and the corresponding association is also deleted.

Reading Restriction

None

Description of Alarm Objects

hwRrppRingRecover

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.4.1

hwRrppRingRecover

hwRrppRingState

When the link fault occurs, the alarm is generated after the ring returns to the Complete state. This alarm is generated by the master node.

This object is implemented as defined in the corresponding MIB files.

hwRrppRingFail

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.4.2

hwRrppRingFail

hwRrppRingState

The alarm is generated when a link on the ring network was faulty. This alarm is generated by the master node.

This object is implemented as defined in the corresponding MIB files.

hwRrppMultiMaster

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.113.4.3

hwRrppMultiMaster

hwRrppRingNodeMode

The alarm is generated when more than one master node exists on the RRPP ring. This alarm is generated by the master node.

This object is implemented as defined in the corresponding MIB files.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178290

Views: 894950

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next