No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DISMAN-TRACEROUTE-MIB

DISMAN-TRACEROUTE-MIB

Functions Overview

DISMAN-TRACEROUTE-MIB is a public MIB defined in RFC 2925. It implements traceroute operations in distributed management mode. This document describes how to implement the functions defined in this MIB on the managed devices.

The OID of root objects is:

iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).traceRouteMIB(81)

Relationship Between Tables

Figure 8-1  Relationship between four tables

Description of Single Objects

traceRouteMaxConcurrentRequests

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.81.1.1

traceRouteMaxConcurrentRequests

Unsigned32

Read-write

The maximum number of concurrent active traceroute requests that are allowed within an agent implementation. A value of 0 for this object implies that there is no limit for the number of concurrent active requests in effect. The limit applies only to new requests being activated. When a new value is set, the agent will continue processing all the requests already active, even if their number exceeds the limit just imposed.

Value range for the number of test instances that can be configured: 0 to 5000.

Description of MIB Tables

traceRouteCtlTable

Defines the Remote Operations Traceroute Control Table for providing the capability of invoking traceroute from a remote host. The results of traceroute operations can be stored in the traceRouteResultsTable, traceRouteProbeHistoryTable, and the traceRouteHopsTable.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.81.1.2.1.1

traceRouteCtlOwnerIndex

Octets(0..32)

Not-accessible

To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 3415, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an 'owner index'. Such an initial index has the SnmpAdminString syntax, and can thus be trivially mapped to a securityName or groupName as defined in VACM, in accordance with a security policy.

When used in conjunction with such a security policy, all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask 'wildcarding' the column subidentifier. More elaborate configurations are possible.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.2

traceRouteCtlTestName

Octets(0..32)

Not-accessible

This object indicates the name of a traceroute test. This is locally unique, within the scope of a traceRouteCtlOwnerIndex.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.3

traceRouteCtlTargetAddressType

InetAddressType

Read-create

This object indicates the type of the host address to be used on the traceroute request at the remote host.

Support IPv4, IPv6 and DNS.

The value of this object: ipv4(1), unknown(0).

The default value is unknown(0).

1.3.6.1.2.1.81.1.2.1.4

traceRouteCtlTargetAddress

InetAddress

Read-create

This object indicates the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding traceRouteCtlTargetAddressType index element.

A value for this object MUST be set prior to transitioning its corresponding traceRouteCtlEntry to active(1) via traceRouteCtlRowStatus.

Support IPv4 ,IPv6and DNS.

The value of IPv4 ranges from 1.0.0.0 to 223.255.255.255.

The value of DNS ranges from 0 to 230.

1.3.6.1.2.1.81.1.2.1.5

traceRouteCtlByPassRouteTable

TruthValue

Read-create

The purpose of this object is to optionally enable bypassing the routing table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an error is returned. This option can be used to perform the traceroute operation to a local host through an interface that has no route defined (for example, after the interface was dropped by routed).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.6

traceRouteCtlDataSize

Unsigned32 (0..65507)

Read-create

This object indicates the size of the data portion of a traceroute request in octets.

A traceroute request is essentially transmitted by encoding a UDP datagram into an IP packet. So subtracting the size of a UDP header (8 octets) and the size of an IP header (20 octets) yields the datasize of traceroute request.

The value ranges from 0 to 8100.

1.3.6.1.2.1.81.1.2.1.7

traceRouteCtlTimeOut

Unsigned32 (1..60)

Read-create

This object indicates the time-out value, in seconds, for a traceroute request.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.8

traceRouteCtlProbesPerHop

Unsigned32 (1..10)

Read-create

This object indicates the number of times to reissue a traceroute request with the same time-to-live (TTL) value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.9

traceRouteCtlPort

Unsigned32 (1..65535)

Read-create

This object indicates the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IANA assigned port, 33434, for the traceroute function.

The value ranges from 1 to 50000.

1.3.6.1.2.1.81.1.2.1.10

traceRouteCtlMaxTtl

Unsigned32 (1..255)

Read-create

This object indicates the maximum time-to-live value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.11

traceRouteCtlDSField

Unsigned32 (0..255)

Read-create

This object indicates the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (ToS) octet in an IPv4 header or as the Traffic Class octet in an IPv6 header. This option can be used to determine what effect an explicit DS Field setting has on a traceroute response. Not all values are legal or meaningful. DS Field usage is often not supported by IP implementations.

A value of 0 means that the function represented by this option is not supported. Useful ToS octet values are probably '16' (low delay) and '8' (high throughput).

Read-only

1.3.6.1.2.1.81.1.2.1.12

traceRouteCtlSourceAddressType

InetAddressType

Read-create

This object indicates the type of the source address, traceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.

Only supports IPv4 and IPv6. The default value is IPv4.

1.3.6.1.2.1.81.1.2.1.13

traceRouteCtlSourceAddress

InetAddress

Read-create

Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source address to be something other than the primary IP address of the interface the probe packet is sent on. If the IP address is not one of this machine's interface addresses, an error is retuned and nothing is sent. A zero-length octet string value for this object disables source address specification.

The address type (InetAddressType) that relates to this object is specified by the corresponding value of traceRouteCtlSourceAddressType.

Only supports IPv4 and IPv6.

1.3.6.1.2.1.81.1.2.1.14

traceRouteCtlIfIndex

InterfaceIndexOrZero

Read-create

Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A value of zero for this object implies that this option is not enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.15

traceRouteCtlMiscOptions

SnmpAdminString

Read-create

This object enables an application to specify implementation-dependent options

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.16

traceRouteCtlMaxFailures

Unsigned32 (0..255)

Read-create

This object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (maximum hop count/possible TTL value) or a 0 indicates that the function of terminating a remote traceroute request when a specific number of successive timeouts are detected is disabled.

The minimum value is 1.

1.3.6.1.2.1.81.1.2.1.17

traceRouteCtlDontFragment

TruthValue

Read-create

This object enables setting of the DF flag in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.18

traceRouteCtlInitialTtl

Unsigned32 (1..255)

Read-create

This object indicates the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.19

traceRouteCtlFrequency

Unsigned32

Read-create

This object indicates the number of seconds for waiting to repeat a traceroute test.

The number of hops in a single traceroute test is determined by the value of the corresponding traceRouteCtlProbesPerHop object.

After a single test completes, the number of seconds as defined by the value of traceRouteCtlFrequency must elapse before the next traceroute test is started.

The default value 0 of this object implies that the test is not repeated.

The value ranges from 0 to 604800.

Default value: 0

1.3.6.1.2.1.81.1.2.1.20

traceRouteCtlStorageType

StorageType

Read-create

This object indicates the storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.21

traceRouteCtlAdminStatus

INTEGER { enabled(1), disabled(2) }

Read-create

This object indicates the desired state that an traceRouteCtlEntry should be in.

  • enabled(1): Starts the test defined in the table.
  • disabled(2): Stops the test defined in the table.

Refer to the corresponding traceRouteResultsOperStatus to determine the operational state of the test defined by this entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.22

traceRouteCtlDescr

SnmpAdminString

Read-create

The purpose of this object is to provide a descriptive name of the remote traceroute test.

The default value is NULL; the length of string ranges from 0 to 230.

1.3.6.1.2.1.81.1.2.1.23

traceRouteCtlMaxRows

Unsigned32

Read-create

This object indicates the maximum number of entries allowed in the traceRouteProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow the addition of a new entry once the number of rows in the traceRouteProbeHistoryTable reaches this value.

Old entries are not removed when a new test is started. Entries are added to the traceRouteProbeHistoryTable until traceRouteCtlMaxRows is reached before entries begin to be removed.

A value of 0 for this object disables creation of traceRouteProbeHistoryTable entries.

The value ranges from 1 to 1000.

1.3.6.1.2.1.81.1.2.1.24

traceRouteCtlTrapGeneration

BITS

{

pathChange(0),

testFailure(1),

testCompletion(2)

}

Read-create

This object indicates when and whether to generate a notification for this entry:

pathChange(0): generates a traceRoutePathChange alarm when the current path varies from a previously determined path.

testFailure(1): generates a traceRouteTestFailed alarm when the full path to a target cannot be determined.

testCompletion(2): generates a traceRouteTestCompleted alarm when the path to a target has been determined.

Do not support the trap when the path to a target has changed.

1.3.6.1.2.1.81.1.2.1.25

traceRouteCtlCreateHopsEntries

TruthValue

Read-create

The current path for a traceroute test is kept in the traceRouteHopsTable on a per hop basis when the value of this object is true.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.26

traceRouteCtlType

Object Identifier

Read-create

The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected from traceRouteImplementationTypeDomains.

Additional implementation types should be allocated as required by implementers of the DISMAN-TRACEROUTE-MIB under their enterprise-specific registration point and not beneath traceRouteImplementationTypeDomains.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.2.1.27

traceRouteCtlRowStatus

RowStatus

Read-create

This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same traceRouteCtlOwnerIndex and traceRouteCtlTestName index values) traceRouteResultsTable, traceRouteProbeHistoryTable, and traceRouteHopsTable entries being deleted.

A value MUST be specified for traceRouteCtlTargetAddress prior to a transition to active(1) state being accepted.

Activation of a remote traceroute operation is controlled via traceRouteCtlAdminStatus and not by transitioning of this object's value to active(1).Transitions in and out of active(1) state are not allowed while an entry's traceRouteResultsOperStatus is active(1)

with the exception that deletion of an entry in this table by setting its RowStatus object to destroy(6) will stop an active traceroute operation.

The operational state of a traceroute operation can be determined by examination of the corresponding traceRouteResultsOperStatus object.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • When creating this table, you must specify index traceRouteCtlOwnerIndex, traceRouteCtlTestName, and traceRouteCtlType.

  • When setting the row, make sure to be accordant with the snmp v2 row-creating standard.

  • traceRouteCtlTargetAddressType and traceRouteCtlTargetAddress must be delivered simultaneously.

Modification Restriction

  • Modifying a single object is supported.

  • traceRouteCtlRowStatus is set when the table row is created.

  • When the test team is carrying out the service testing, that is, when the traceRouteCtlAdminStatus is enabled, the parameters, except traceRouteCtlAdminStatus, of the test team cannot be modified.

Deletion Restriction

  • When the test team is operating service testing, that is, when the status of traceRouteCtlAdminStatus is enabled, the test team cannot be deleted.

  • Deletion of this table results in the deletion of related entries in traceRouteResultsTable, traceRouteProbeHistoryTable, and traceRouteHopsTable.

Access Restriction

The entries in this table can be read without restraint.

traceRouteResultsTable

Defines the Remote Operations Traceroute Results Table for keeping track of the status of a traceRouteCtlEntry.

An entry is added to the traceRouteResultsTable when an traceRouteCtlEntry is started by successful transition of its traceRouteCtlAdminStatus object to enabled(1). An entry is removed from the traceRouteResultsTable when its corresponding traceRouteCtlEntry is deleted.

The indexes of this table are traceRouteCtlOwnerIndex and traceRouteCtlTestName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.81.1.3.1.1

traceRouteResultsOperStatus

INTEGER { enabled(1), disabled(2), completed(3) }

Read-only

Reflects the operational state of an traceRouteCtlEntry.

{

enabled(1): The test is in progress.

disabled(2): The test has stopped.

completed(3): The test is completed.

}

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.2

traceRouteResultsCurHopCount

Gauge32

Read-only

Reflects the current TTL value (from 1 to 255) for a remote traceroute operation. Maximum TTL value is determined by traceRouteCtlMaxTtl.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.3

traceRouteResultsCurProbeCount

Gauge32

Read-only

Reflects the current probe count (1..10) for a remote traceroute operation. The maximum probe count is determined by traceRouteCtlProbesPerHop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.4

traceRouteResultsIpTgtAddrType

InetAddressType

Read-only

This object indicates the type of address stored in the corresponding traceRouteResultsIpTgtAddr object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.5

traceRouteResultsIpTgtAddr

InetAddress

Read-only

This object reports the IP address associated with a traceRouteCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero-length octet string when a DNS name is not specified or when a specified DNS name fails to resolve.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.6

traceRouteResultsTestAttempts

Gauge32

Read-only

The current number of attempts to determine a path to a target. The value of this object MUST be started at 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.7

traceRouteResultsTestSuccesses

Gauge32

Read-only

The current number of successful attempts to determine a path to a target. The value of this object MUST be reported as 0 when no attempts have succeeded.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.3.1.8

traceRouteResultsLastGoodPath

Octets

Read-only

The date and time when the last complete path was determined. A path is complete if responses were received or timeout occurred for each hop on the path; that is, for each TTL value from the value of the corresponding traceRouteCtlInitialTtl object up to the end of the path or (if no reply from the target IP address was received) up to the value of the corresponding traceRouteCtlMaxTtl object.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries cannot be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

traceRouteProbeHistoryTable

Defines the Remote Operations Traceroute Results Table for storing the results of a traceroute operation.

An implementation of this MIB will remove the oldest entry in the traceRouteProbeHistoryTable to allow the addition of a new entry once the number of rows in the traceRouteProbeHistoryTable reaches the value specified by traceRouteCtlMaxRows.

The indexes of this table are traceRouteCtlOwnerIndex, traceRouteCtlTestName, traceRouteProbeHistoryIndex, traceRouteProbeHistoryHopIndex and traceRouteProbeHistoryProbeIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.81.1.4.1.1

traceRouteProbeHistoryIndex

Unsigned32 (1..'ffffffff'h)

Not-accessible

An entry in this table is created when the result of a traceroute probe is determined. The initial 2 instance identifier index values identify the traceRouteCtlEntry that a probe result (traceRouteProbeHistoryEntry) belongs to. An entry is removed from this table when its corresponding traceRouteCtlEntry is deleted.

An implementation MUST start assigning traceRouteProbeHistoryIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.2

traceRouteProbeHistoryHopIndex

Unsigned32 (1..255)

Not-accessible

Indicates which hop in a traceroute path the probe's results are for. The value of this object is initially determined by the value of traceRouteCtlInitialTtl.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.3

traceRouteProbeHistoryProbeIndex

Unsigned32 (1..10)

Not-accessible

TIndicates the index of a probe for a particular hop in a traceroute path. The number of probes per hop is determined by the value of the corresponding traceRouteCtlProbesPerHop object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.4

traceRouteProbeHistoryHAddrType

InetAddressType

Read-only

This object indicates the type of address stored in the corresponding traceRouteProbeHistoryHAddr object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.5

traceRouteProbeHistoryHAddr

InetAddress

Read-only

The address of a hop in a traceroute path. This object is not allowed to be a DNS name. The value of the corresponding object, traceRouteProbeHistoryHAddrType, indicates this object's IP address type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.6

traceRouteProbeHistoryResponse

Unsigned32

Read-only

The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.7

traceRouteProbeHistoryStatus

OperationResponseStatus

Read-only

The result of a traceroute operation made by a remote host for a particular probe.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.8

traceRouteProbeHistoryLastRC

Integer32

Read-only

The last implementation-method-specific reply code received.

Traceroute is usually implemented by transmitting a series of probe packets with increasing time-to-live values. A probe packet is a UDP datagram encapsulated into an IP packet. Each hop in a path to the target (destination) host rejects the probe packets (probe's TTL too small, ICMP reply) until either the maximum TTL is exceeded or the target host is received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.4.1.9

traceRouteProbeHistoryTime

DateAndTime

Read-only

Timestamp recorded when this probe result was determined.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries cannot be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

traceRouteHopsTable

Defines the Remote Operations Traceroute Hop Table for keeping track of the results of traceroute tests on a per hop basis.

The indexes of this table are traceRouteCtlOwnerIndex, traceRouteCtlTestName and traceRouteHopsHopIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.81.1.5.1.1

traceRouteHopsHopIndex

Unsigned32 (1..'ffffffff'h)

Not-accessible

This object indicates the index of traceroute hops. For the same traceRouteCtlOwnerIndex and traceRouteCtlTestName, the value of this object must start from 1 and increase per hop.

If traceRouteCtlCreateHopsEntries is set to true(1), traceRouteCtlEntry saves the current traceroute path to traceRouteHopsTable.

All hops in a traceroute path must be updated at the same time when a traceroute operation completes.

The initial portion of the path up to the first hop that has changed must retain the same traceRouteHopsHopIndex. The remaining portion of the path should be assigned new traceRouteHopsHopIndex.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.2

traceRouteHopsIpTgtAddressType

InetAddressType

Read-only

This object indicates the type of the address stored in the corresponding traceRouteHopsIpTargetAddress object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.3

traceRouteHopsIpTgtAddress

InetAddress

Read-only

This object indicates the IP address associated with the hop. The value of this object must be a numeric IP address but not as a DNS name.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.4

traceRouteHopsMinRtt

Unsigned32

Read-only

This object indicates the maximum round-trip-time (RTT) of the hop.

The value 0 implies that no RTT has been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.5

traceRouteHopsMaxRtt

Unsigned32

Read-only

This object indicates the minimum RTT of the hop.

The value 0 implies that no RTT has been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.6

traceRouteHopsAverageRtt

Unsigned32

Read-only

This object indicates the average RTT of the hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.7

traceRouteHopsRttSumOfSquares

Unsigned32

Read-only

This object indicates the square sum of total RTT of this hop. It is used in standard deviation calculation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.8

traceRouteHopsSentProbes

Unsigned32

Read-only

This object indicates the number of probes by this hop during the traceroute test.

The value of this object must start from 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.9

traceRouteHopsProbeResponses

Unsigned32

Read-only

This object indicates the number of responses received by this hop during the traceroute test.

This value of this object must start from 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.81.1.5.1.10

traceRouteHopsLastGoodProbe

DateAndTime

Read-only

This object indicates the date and time at which the last response was received for a probe for this hop during this traceroute test.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries cannot be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

Description of Alarm Objects

traceRoutePathChange

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.81.0.1

traceRoutePathChange

traceRouteCtlTargetAddressType

traceRouteCtlTargetAddress

traceRouteResultsIpTgtAddrType

traceRouteResultsIpTgtAddr

The path to a target has changed.

This object is implemented as defined in the corresponding MIB files.

traceRouteTestFailed

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.81.0.2

traceRouteTestFailed

traceRouteCtlTargetAddressType

traceRouteCtlTargetAddress

traceRouteResultsIpTgtAddrType

traceRouteResultsIpTgtAddr

An alarm is generated when the path to the destination IP address is not determined.

This object is implemented as defined in the corresponding MIB files.

traceRouteTestCompleted

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.2.1.81.0.3

traceRouteTestCompleted

traceRouteCtlTargetAddressType

traceRouteCtlTargetAddress

traceRouteResultsIpTgtAddrType

traceRouteResultsIpTgtAddr

An alarm is generated when the path to the destination IP address is determined.

This object is implemented as defined in the corresponding MIB files.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178290

Views: 896668

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next