No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

S7700 and S9700 V200R011C10

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-MPLSOAM-MIB

HUAWEI-MPLSOAM-MIB

Functions Overview

MPLS-OAM-MIB defines the OAM feature on the source and destination ends of the detected LSP.

The OID of root objects is:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwMpls(12).hwMplsOam(7).hwMplsOamPs(1).hwMplsOamObjects(1)

Relationship Between Tables

These three tables are independent.

Description of Single Objects

hwMplsOamCapability

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.1.1

hwMplsOamCapability

Unsigned32

Read-write

This object indicates whether the OAM module is globally enabled.

Values are as follows:
  • 0: incapable
  • 1: capable
  • 2: capable (based-itu)

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwMplsOamIgrTable

hwMplsOamIgrTable describes the OAM feature of the source end of the detected LSP. It provides the following functions:

  • Creating, modifying and deleting OAM instances

  • Configuring the parameters of OAM, including the tunnel name bound to the detected LSP, OAM detection parameters, reverse channel parameters, and the enable flag

  • Querying the detection status, including whether the configuration takes effect, LSP availability status, and defect status

The index of this table is hwMplsOamIgrIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1

hwMplsOamIgrIndex

Unsigned32

accessible-for-notify

This object indicates the index of the OAM ingress entry of the LSP ingress.

The value ranges from 1 to 4294967296.

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2

hwMplsOamIgrTunnName

OCTET STRING

Read-create

This object indicates the name of the tunnel bound to the LSP.

The value is a string of a maximum of 16 characters.

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3

hwMplsOamIgrDetType

INTEGER {cv(1), ffd(2)}

Read-create

The value of this object identifies the OAM detection type.

Values are as follows:

  • CV (1)
  • FFD (2)

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4

hwMplsOamIgrDetFreq

INTEGER {cv1000ms(0), ffd10ms2(1), ffd20ms3(2), ffd50ms4(3), ffd100ms5(4), ffd200ms6(5), ffd500ms7(6), ffd3ms8(7)}

Read-create

The value of this object identifies the OAM detection frequency.

Values are as follows:

  • 1s (0)
  • 10 ms (1)
  • 20 ms (2)
  • 50 ms (3)
  • 100 ms (4)
  • 200 ms (5)
  • 500 ms (6)
  • 7: 3ms

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5

hwMplsOamIgrRevType

INTEGER {private(1), share(2)}

Read-create

The value of this object identifies the reverse channel type.

Values are as follows:

  • exclusive (1)
  • shared (2)

The default value is 2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6

hwMplsOamIgrRevLspName

OCTET STRING

Read-create

This object indicates the name of the reverse LSP.

The value is a string of a maximum of 16 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7

hwMplsOamIgrRevLsrId

IpAddress

Read-create

This object indicates the LSR ID of the reverse channel.

The value is a four-byte IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8

hwMplsOamIgrRevSessTunnId

Integer32 (0..65535)

Read-create

The value of this object identifies the tunnel ID of the reverse channel.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9

hwMplsOamIgrEnable

INTEGER {disable(0), enable(1)}

Read-create

The value of this object identifies whether the OAM detection is enabled.

Values are as follows:

  • disable (0)
  • enable (1)

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10

hwMplsOamIgrValid

Integer32 (0..1)

Read-only

The value of this object identifies whether OAM configuration takes effect.

Values are as follows:

  • 0: invalid, indicating that detection does not start.
  • 1: valid, indicating that detection starts.

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11

hwMplsOamIgrAvaState

Integer32 (0..1)

Read-only

The value of this object identifies the LSP availability status.

Values are as follows:

  • available (0)
  • unavailable (1)

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12

hwMplsOamIgrDefectType

Integer32 (0..9)

Read-only

The value of this object identifies the LSP defect type.

Values are as follows:

  • No defect (0)
  • dServer (1)
  • dPeerme (2)
  • dLocv (3)
  • dTTSI_Mismatch (4)
  • dTTSI_Mismerge (5)
  • dExcess (6)
  • dUnknown (7)
  • RLSN Down (8)
  • dIngressDown (9)

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13

hwMplsOamIgrRowStatus

RowStatus

Read-create

The value of this object identifies the entry operation mode.

Values are as follows:

  • active (1)
  • not in service (2)
  • not ready (3)
  • create and go (4)
  • create and wait (5)
  • destroy (6)

There is no default value.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The creation restrictions are as follows:

  • When the hwMplsOamIgrDetType is 1, hwMplsOamIgrDetFreq can only be 0. When the hwMplsOamIgrDetType is 2, hwMplsOamIgrDetFreq can be any integer from 1 to 6.

  • hwMplsOamIgrRowStatus is set to 4.

  • When creating new entries, you must set hwMplsOamIgrTunnName and hwMplsOamIgrRowStatus, but cannot set hwMplsOamIgrIndex, hwMplsOamIgrValid, hwMplsOamIgrAvaState, and hwMplsOamIgrDefectType. Other parameters take the default values if not configured.

Modification Restriction

The modification restrictions are as follows:

  • When modifying entries, you can set only hwMplsOamIgrDetType, hwMplsOamIgrDetFreq, hwMplsOamIgrRevType, hwMplsOamIgrRevLspName, hwMplsOamIgrRevLsrId, and hwMplsOamIgrRevSessTunnId, but cannot set the other parameters.

  • hwMplsOamIgrDetType and hwMplsOamIgrDetFreq must be set at the same time. When hwMplsOamIgrDetType is 1, hwMplsOamIgrDetFreq can only be 0. When the hwMplsOamIgrDetType is 2, the hwMplsOamIgrDetFreq can be any integer from 1 to 6.

Deletion Restriction

The deletion restrictions are as follows:

  • When deleting entries, you need to set hwMplsOamIgrTunnName and hwMplsOamIgrRowStatus, but cannot set the other parameters.

  • hwMplsOamIgrTunnName takes the default value, and hwMplsOamIgrRowStatus is set to 6.

Accessing Restriction

The entries in this table can be read without restraint.

hwMplsOamEgrTable

hwMplsOamEgrTable describes the OAM feature of the destination end of the detected LSP. It provides the following functions:

  • Creating, modifying and deleting OAM instances

  • Configuring the parameters of OAM, including the tunnel name bound to the detected LSP, OAM detection parameters, reverse channel parameters, and the enable flag

  • Querying the detection status, including whether the configuration takes effect, LSP availability status, and defect status

The indexes of this table are hwMplsOamEgrLspName, hwMplsOamEgrLsrId, and hwMplsOamEgrSessTunnId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1

hwMplsOamEgrLspName

OCTET STRING

accessible-for-notify

This object indicates the name of the LSP.

The value is a string of a maximum of 16 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2

hwMplsOamEgrLsrId

IpAddress

accessible-for-notify

This object indicates the LSR ID of the LSP ingress.

The value is a four-byte IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3

hwMplsOamEgrSessTunnId

Integer32 (0..65535)

not-accessible

This object indicates the ID of the tunnel bound to the LSP.

The value ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4

hwMplsOamEgrDetType

INTEGER { invalid(0), cv(1), ffd(2)}

Read-create

The value of this object identifies the OAM detection type.

Values are as follows:

  • 1: CV
  • 2: FFD
  • 0: invalid (automatic protocol enabled).

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5

hwMplsOamEgrDetFreq

INTEGER {cv1000ms(0), ffd10ms2(1), ffd20ms3(2), ffd50ms4(3), ffd100ms5(4), ffd200ms6(5), ffd500ms7(6),invalid8(7), ffd3ms9(8)}

Read-create

The value of this object identifies the OAM detection frequency.Values are as follows:

  • 1s (0)
  • 10 ms (1)
  • 20 ms (2)
  • 50 ms (3)
  • 100 ms (4)
  • 200 ms (5)
  • 500 ms (6)
  • invalid (7)
  • 8: 3ms

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6

hwMplsOamEgrRevType

INTEGER {invalid(0), rivate(1), share(2)}

Read-create

The value of this object identifies the reverse channel type.

Values are as follows:

0: invalid.

1: exclusive.

2: shared.

The default value is 2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7

HwMplsOamEgrRevTunnName

OCTET STRING

Read-create

This object indicates the name of the reverse tunnel.

The value is a string of a maximum of 16 characters.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8

HwMplsOamEgrAutoEn

INTEGER {disable(0), enable(1)}

Read-create

The value of this object identifies the enable flag of the automatic protocol.

Values are as follows:

  • 0: disable
  • 1: enable

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9

HwMplsOamEgrAutoOvertime

Integer32 (0..255)

Read-create

The value of this object identifies the timeout period of the automatic protocol.

The value ranges from 0 to 255.

The default value is 10.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10

HwMplsOamEgrBDIFreq

INTEGER {perSecond(0),detectFrequency(1)}

Read-create

The value of this object identifies the BDI frequency.

Values are as follows:

  • 0: every second
  • 1: inheriting the packet reception frequency

The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11

HwMplsOamEgrEnable

INTEGER {disable(0), enable(1)}

Read-create

The value of this object identifies whether OAM is enabled.

The values are as follows:

  • 0: disable
  • 1: enable

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12

HwMplsOamEgrValid

INTEGER {stop(1), start(2)}

Read-only

The value of this object identifies whether OAM configuration is valid.

Values are as follows:

  • 1: invalid
  • 2: valid

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13

HwMplsOamEgrAvaState

Integer32 (0..1)

Read-only

The value of this object identifies the LSP availability status.

Values are as follows:

  • 0: unavailable
  • 1: available

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14

HwMplsOamEgrDefectType

Integer32 (0..9)

Read-only

The value of this object identifies the LSP defect type.

Values are as follows:

  • 0: no defect
  • 1: dServer
  • 2: dPeerme
  • 3: dLocv
  • 4: dTTSI_Mismatch
  • 5: dTTSI_Mismerge
  • 6: dExcess
  • 7: dUnknown
  • 8: RLSN Down
  • 9: dEgressDown

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15

HwMplsOamEgrRowStatus

RowStatus

Read-create

The value of this object identifies the entry operation.

Values are as follows:

1: active

2: not in service

3: not ready

4: create and go

5: create and wait

6: destroy

There is no default value.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The creation restrictions are as follows:

  • When hwMplsOamEgrDetType is 1, hwMplsOamEgrDetFreq can only be 0. When hwMplsOamEgrDetType is 2, hwMplsOamEgrDetFreq can be any integer from 1 to 6.

  • When hwMplsOamEgrAutoEn is 1, you cannot set hwMplsOamEgrDetType or hwMplsOamEgrDetType. If not specified, hwMplsOamEgrAutoOvertime defaults to be 10. When hwMplsOamEgrAutoEn is 0, you must set hwMplsOamEgrDetType and hwMplsOamEgrDetFreq. If not specified, hwMplsOamEgrRevType defaults to be 2.

  • When hwMplsOamEgrRevType is 0, you cannot specify hwMplsOamEgrRevTunnName. When hwMplsOamEgrRevType is 0 or 2, if you do not specify hwMplsOamEgrRevTunnName, the system changes hwMplsOamEgrRevTyp to 0.

  • hwMplsOamEgrRowState is set to 4.

  • When creating new entries, you must set hwMplsOamIgrRowState, and cannot set hwMplsOamEgrValid, hwMplsOamEgrAvaState, and hwMplsOamEgrDefectType. Other parameters take the default values if not configured.

Modification Restriction

The modification restrictions are as follows:

  • When modifying entries, you can set only hwMplsOamEgrDetType, hwMplsOamEgrDetFreq, hwMplsOamEgrRevType, hwMplsOamEgrRevTunnName, hwMplsOamEgrAutoEn, hwMplsOamEgrAutoOvertime, hwMplsOamEgrBDIFreq, and hwMplsOamEgrEnable. Other parameters cannot be configured.

  • hwMplsOamIgrDetType and hwMplsOamIgrDetFreq must be set at the same time. When hwMplsOamIgrDetType is 1, hwMplsOamIgrDetFreq can only be 0. When hwMplsOamIgrDetType is 2, hwMplsOamIgrDetFreq can be any integer from 1to 6.

  • When hwMplsOamEgrAutoEn is 1, you cannot set hwMplsOamEgrDetType and hwMplsOamEgrDetType. If not specified, hwMplsOamEgrAutoOvertime defaults to be 10. When hwMplsOamEgrAutoEn is 1, you must set hwMplsOamEgrDetType and hwMplsOamEgrDetFreq. If not specified, hwMplsOamEgrRevType defaults to be 2.

  • When hwMplsOamEgrRevType is 0, you cannot specify hwMplsOamEgrRevTunnName. When the hwMplsOamEgrRevType is 1 or 2, if you do not specify the hwMplsOamEgrRevTunnName, the system will change the hwMplsOamEgrRevTyp to 0.

Deletion Restriction

When deleting entries, you need to set hwMplsOamIgrRowStatus to 6, and do not need to set the other parameters.

Accessing Restriction

The entries in this table can be read without restraint

hwMplsPsTable

hwMplsPs table describes features of the protection group. It is used to:

  • Check all the parameters, including the names of and the IDs of the active and standby tunnels, switch-back mode, WTR time, and the Holdoff time required by the protection group.

  • Check the protection switch status, including the status of the active and standby tunnels and the switch result

The index of this table is hwMplsPsIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.1

hwMplsPsIndex

Unsigned32

Read-only

The value of this object identifies the index of the active tunnel interface

Value range: 1 to 4294967296

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.2

hwMplsPsType

Integer32

Read-only

The value of this object identifies the protection type.

Values are as follows:
  • 1: 1:1
  • 2: 1+1
  • 3: shared mesh
  • 4: packet 1+1
Currently, only 1:1 is supported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3

hwMplsPsWorkTunnName

OCTET STRING

Read-only

This object indicates the active tunnel.

The string must be of no more than 16 bytes.

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.4

hwMplsPsWorkTunnId

Integer32

Read-only

The value of this object identifies the active tunnel ID.

Value range: 1 to 65535

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.5

hwMplsPsProtectTunnName

OCTET STRING

Read-only

This object indicates the name of the standby tunnel.

The string must be of no more than 16 bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.6

hwMplsPsProtectTunnId

Integer32

Read-only

The value of this object identifies the standby tunnel ID.

Value range: 1 to 65535

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.7

hwMplsPsRevertiveMode

Integer32

Read-only

The value of this object identifies the switch-back mode.

Values are as follows:
  • 1: Can switch-back
  • 2: Cannot switch-back

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.8

hwMplsPsWTR

Integer32

Read-only

The value of this object identifies the WTR time.

Value range: 0 to 60, Step length: 30s

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.9

hwMplsPsHoldOff

Integer32

Read-only

The value of this object identifies the Holdoff time

Value range:0 to 100

Step length: 100 ms

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.10

hwMplsPsSwitchCondition

Integer32

Read-only

The value of this object identifies the present function protection command.

Values are as follows:
  • 1: clear
  • 2: lockout of protection
  • 3: forced protection
  • 4: signal fail
  • 5: manual switch for working-lsp
  • 6: manual switch for protection-lsp
  • 7: WTR-timer
  • 8: Holdoff-timer
  • 9: others
There is no default value.
Currently, the following values are not supported:
  • 4: signal fail
  • 7: WTR-timer
  • 8: Holdoff-timer

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.11

hwMplsPsWorkTunnelState

Integer32

Read-only

The value of this object identifies the active tunnel status.

Values are as follows:
  • 1: indefective
  • 2: defective
There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.12

hwMplsPsProtTunnelState

Integer32

Read-only

The value of this object identifies the standby tunnel status.

Values are as follows:
  • 1: indefective
  • 2: defective
There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.13

hwMplsPsSwitchResult

Integer32

Read-only

The value of this object identifies the present switch result.

Values are as follows:
  • 1: indicates that the active tunnel is in operation.
  • 2: indicates that the standby tunnel is in operation.
There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.14

hwMplsPsCfgType

Integer32

Read-only

The value of this object identifies the type of configured protection groups. The configuration takes effect after commit.

Values are as follows:
  • 1: 1:1
  • 2: 1+1
  • 3: shared mesh
  • 4: packet 1+1
Currently, only 1:1 is supported.

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.15

hwMplsPsCfgProtectTunnId

Integer32

Read-only

The value of this object identifies the configured standby Tunnel ID. The configuration takes effect after commit.

Value range: 1 to 65535

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.16

hwMplsPsCfgRevertiveMode

Integer32

Read-only

The value of this object identifies the configured switch-back mode. The configuration takes effect after commit.

Values are as follows:
  • 1: can switch back
  • 2: cannot switch back
Default value: 1

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.17

hwMplsPsCfgWTR

Integer32

Read-only

The value of this object identifies the configured WTR time. The configuration takes effect after commit.

Value range: 1 to 60

Step length: 30s

Default value: 720s

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.18

hwMplsPsCfgHoldOff

Integer32

Read-only

The value of this object identifies the configured Holdoff time. The configuration takes effect after commit.

Value range:0 to 100

Step length: 100ms

Default value: 0ms

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.19

hwMplsPsRowStatus

Row Status

Read-create

This object indicates the operating status of rows.

Values are as follows:
  • 1:active
  • 2:not in service
  • 3:not ready
  • 4:create and go
  • 5:create and wait
  • 6:destroy
There is no default value.
Currently, only the following operation modes are supported:
  • 1: active

  • 4: create and go

  • 6: destroy

1.3.6.1.4.1.2011.5.12.7.1.3.1.1.20

hwMplsPsLocalState

SYNTAX Integer32 (0..11)

read-only

The current local state of the protection group.

Values are as follows:
  • 0: Lockout of Protection (LO)
  • 1: Signal Fail for Protection (SF-P)
  • 2: Forced Switch (FS)
  • 3: Signal Fail for Working (SF)
  • 4: Signal Degrade for Protection(SD-P)
  • 5: Signal Degrade for Working(SD)
  • 6: Manual Switch (MS)
  • 7: Wait-to-Restore (WTR)
  • 8: Exercise (EXER)
  • 9: Reverse Request(RR)
  • 10: Do Not Revert (DNR)
  • 11: No Request (NR)

The priorities of the commands are as follows:

LO-> SF-P->FS->SF->SD-P->SD->MS->WTR->EXER->RR->DNR->NR

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Description of Alarm Objects

hwMplsOamIgrLSPOutDefect

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.1

hwMplsOamIgrLSPOutDefect

  • hwMplsOamIgrIndex
  • hwMplsOamIgrTunnName
  • hwMplsOamIgrAvaState
  • hwMplsOamIgrDefectType

OAM detects that the source of the LSP recovers from the defect state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamIgrLSPInDefect

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.2

hwMplsOamIgrLSPInDefect

  • hwMplsOamIgrIndex
  • hwMplsOamIgrTunnName
  • hwMplsOamIgrAvaState
  • hwMplsOamIgrDefectType

OAM detects that the source of the LSP is in the defect state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamIgrLSPAva

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.3

hwMplsOamIgrLSPAva

  • hwMplsOamIgrIndex
  • hwMplsOamIgrTunnName
  • hwMplsOamIgrAvaState
  • hwMplsOamIgrDefectType

OAM detects that the source of the LSP is in the available state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamIgrLSPUnAva

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.4

hwMplsOamIgrLSPUnAva

  • hwMplsOamIgrIndex
  • hwMplsOamIgrTunnName
  • hwMplsOamIgrAvaState
  • hwMplsOamIgrDefectType

OAM detects that the source of the LSP is in the unavailable state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamEgrLSPOutDefect

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.5

hwMplsOamEgrLSPOutDefect

  • hwMplsOamEgrLspName
  • hwMplsOamEgrLsrId
  • hwMplsOamEgrSessTunnId
  • hwMplsOamEgrAvaState
  • hwMplsOamEgrDefectType

OAM detects that the destination of the LSP recovers from the defect state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamEgrLSPInDefect

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.6

hwMplsOamEgrLSPInDefect

  • hwMplsOamEgrLspName
  • hwMplsOamEgrLsrId
  • hwMplsOamEgrSessTunnId
  • hwMplsOamEgrAvaState
  • hwMplsOamEgrDefectType

OAM detects that the destination of the LSP is in the defect state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamEgrLSPAva

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.7

hwMplsOamEgrLSPAva

  • hwMplsOamEgrLspName
  • hwMplsOamEgrLsrId
  • hwMplsOamEgrSessTunnId
  • hwMplsOamEgrAvaState
  • hwMplsOamEgrDefectType

OAM detects that the source of the LSP is in the available state.

This object is implemented as defined in the corresponding MIB files.

hwMplsOamEgrLSPUnAva

OID

Object

Binding Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.2.8

hwMplsOamEgrLSPUnAva

  • hwMplsOamEgrLspName
  • hwMplsOamEgrLsrId
  • hwMplsOamEgrSessTunnId
  • hwMplsOamEgrAvaState
  • hwMplsOamEgrDefectType

OAM detects that the source of the LSP is in the unavailable state.

This object is implemented as defined in the corresponding MIB files.

hwMplsPsSwitchPtoW

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.4.1

hwMplsPsSwitchPtoW

1 hwMplsPsWorkTunnName

2 hwMplsPsWorkTunnId

3 hwMplsPsProtectTunnName

4 hwMplsPsProtectTunnId

5 hwMplsPsSwitchResult

The data stream is switched to the active tunnel from the standby tunnel of the protection group.

This object is implemented as defined in the corresponding MIB files.

hwMplsPsSwitchWtoP

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.12.7.1.4.2

hwMplsPsSwitchWtoP

1 hwMplsPsWorkTunnName

2 hwMplsPsWorkTunnId

3 hwMplsPsProtectTunnName

4 hwMplsPsProtectTunnId

5 hwMplsPsSwitchResult

The data stream is switched to the standby tunnel from the active tunnel of the protection group.

This object is implemented as defined in the corresponding MIB files.

Unsupported Objects

The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.

Table 85-1  List of unsupported objects

Object ID

Object Name

Table

1.3.6.1.4.1.2011.5.12.7.1.2.12

hwMplsOamL2vcOutDefect

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.13

hwMplsOamL2vcInDefect

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.14

hwMplsOamL2vcAva

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.15

hwMplsOamL2vcUnAva

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.16

hwMplsOamBidirectionalTunnelOutDefect

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.17

hwMplsOamBidirectionalTunnelInDefect

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.18

hwMplsOamBidirectionalTunnelAva

Single object

1.3.6.1.4.1.2011.5.12.7.1.2.19

hwMplsOamBidirectionalTunnelUnAva

Single object

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178290

Views: 900489

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next