No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S7700 and S9700 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Password Submenu

Password Submenu

In the BootROM main menu, select 8 to enter the password submenu.
             MAIN  MENU

     1. Boot with default mode
     2. Boot from Flash
     3. Boot from CFCard
     4. Enter serial submenu
     5. Enter ethernet submenu
     6. Enter file system submenu
     7. Enter test submenu
     8. Enter password submenu
     9. Modify Flash description area
    10. Clear password for console user
    11. Reboot

Enter your choice(1-11): 8


     1. Modify BootROM password
     2. Reset BootROM password
     3. Return to main menu
Table 10-7  Password submenu description



1. Modify BootROM password

Changes the BootROM password. You can change the BootROM password to prevent unauthorized users from entering the BootROM menu.

2. Reset BootROM password

Restores the default BootROM password. The default BootROM password is

3. Return to main menu


Updated: 2020-02-04

Document ID: EDOC1000178308

Views: 101309

Downloads: 152

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next