No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S7700 and S9700 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of USB-based Deployment

Overview of USB-based Deployment


USB-based deployment allows you to configure or upgrade devices using a USB flash drive. Before device deployment, save the required files in a USB flash drive. After you connect the USB flash drive to a device, the device downloads the files from the USB flash drive to complete automatic upgrade or service deployment.


As the network expands, more and more network devices are used and device deployment becomes more frequent. Traditionally, software engineers have to deploy the devices one by one, which is time-consuming and laborious. USB-based deployment frees software engineers from such trouble. They only need to save the required files in a USB flash drive, and then other onsite personnel can finish the deployment process easily. This function simplifies the device deployment process and lowers deployment costs.

Updated: 2020-02-04

Document ID: EDOC1000178308

Views: 101976

Downloads: 152

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next