No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S7700 and S9700 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Device Login Through the Web System

Verifying the Configuration of Device Login Through the Web System


After completing the configuration, run the following commands in any view on the CLI to check information about the SSL policy, loaded digital certificate, online web users, and current HTTPS server.


  • Run the display ssl policy [ policy-name ] command to check the configured SSL policy and loaded digital certificate.
  • Run the display http user [ username username ] command to check online web user information.
  • Run the display http server command to check current HTTPS server information.
Updated: 2020-02-04

Document ID: EDOC1000178308

Views: 100885

Downloads: 152

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next