No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S7700 and S9700 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining Client Information

Maintaining Client Information


Client information saved on the Commander includes the global parameter settings, group information, and client information. Based on client information, the Commander determines what files each client needs to load and tracks the client status in real time.

The maximum number of clients managed by the Commander depends on the device specifications. If the number of clients exceeds the upper limit, information about new clients cannot be configured on the Commander. To prevent clients in lost state from occupying the database resources for a long time, enable the function of aging lost state clients. When the aging time expires, lost state clients are deleted. If some clients in lost state occupy the database resources for a long time, delete these clients.


Age lost state clients.

  1. Run the system-view command to enter the system view.

  2. Run the easy-operation command to enter the Easy-Operation view.

  3. Run the client aging-time aging-time command to age clients in lost state and specify the aging time.

    By default, clients in lost state are not aged.

    • Automatically learnt clients are deleted after their aging time expires.
    • Manually configured clients are not deleted but their status changes to unknown.

Delete lost state clients.

Run the reset easy-operation client-offline command in the user view to delete lost state clients.

  • If clients are automatically learnt, they can be deleted.
  • If clients are configured manually, they cannot be deleted but their status changes to unknown.
Clear the client database.

If you clear the client database, information about configured clients is lost. Exercise caution when you clear the client database.

Run the reset easy-operation client-database command in the user view to delete the client database.

After you clear the client database, information about manually configured and automatically learnt clients is deleted. If the client auto-join function is enabled on the Commander, it continues adding learned client information to the client database.

Updated: 2020-02-04

Document ID: EDOC1000178308

Views: 101473

Downloads: 152

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next