No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S7700 and S9700 V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Executing User View Commands in the System View

Executing User View Commands in the System View


Some commands need to be executed in the user view. To execute these commands, you need to exit from the system view to the user view and then execute the commands. In order to ease command execution, you can use the run command to execute user view commands directly in the system view.


  1. Run system-view

    The system view is displayed.

  2. Run run command-line

    The user view command is executed.

    The parameter command-line is a user view command. You must enter the complete command manually because automatic command line completion is not supported.

Updated: 2020-02-04

Document ID: EDOC1000178308

Views: 101224

Downloads: 152

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next