No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic VBST Configuration

Verifying the Basic VBST Configuration


  • Run the display stp [ vlan vlan-id ] [ interface interface-type interface-number | slot slot-id ] [ brief ] command to check the spanning tree status and statistics.
  • Run the display stp [ vlan vlan-id ] active command to check details of and statistics on spanning trees of all ports in Up state.
  • Run the display stp [ vlan vlan-id ] bridge { root | local } command to check the spanning tree status of the local bridge and root bridge.
  • Run the display stp global command to check the summary of the spanning tree protocol.
  • Run the display stp region-configuration [ digest ] command to check the mapping between instances and VLANs.
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 296644

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next