No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure a User-Side Interface on an STP Switch?

How Do I Configure a User-Side Interface on an STP Switch?

Terminal devices cannot participate in the STP calculation or respond to STP packets. You can configure a user-side interface as follows:

  • On a port, run the stp edge-port enable command to configure the port as an STP edge port, and run the stp bpdu-filter enable command to enable the BPDU packet filtering function and prevent the port from sending BPDU packets.
  • Run the stp disable command on the port to disable the STP protocol and make the port remain in forwarding state.
To ensure availability and security, you are advised to configure the port as an STP edge port. This is because when a loop occurs on a terminal device connected to an edge port, the port automatically switches to a non-edge port and enables the loop breaking function of STP.
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 296698

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next