No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Does the Switch Support QinQ?

Does the Switch Support QinQ?

The switch supports QinQ. QinQ falls into basic QinQ and selective QinQ. After selective QinQ is configured on an SA card, configure VLAN mapping to map the VLAN tag that needs to be transparently transmitted to itself, for example, port vlan-mapping vlan 20 map-vlan 20. SA cards include the ES0D0G24SA00 and ES0D0G24CA00 cards of the S7700, and the EH1D2S24CSA0 and EH1D2G24SSA0 cards of the S9700.

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 296460

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next