No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Aging Timer of Registered VLANs

(Optional) Setting the Aging Timer of Registered VLANs

Context

If an HVRP interface does not receive any registration packets from a VLAN within the aging time, the VLAN is deleted from the HVRP interface. The switch learns only MAC addresses in registered VLANs. This reduces the number of MAC addresses that the switch learns and improves the stability of the switch when network flapping occurs.

NOTE:
  • VLAN aging is implemented only on HVRP non-root interfaces. VLANs on the HVRP root interface never age out because all packets must pass through the HVRP root interface.
  • The value of the VLAN registration timer must be smaller than the value of the aging timer of registered VLANs. It is recommended that the value of the aging timer of registered VLANs be over three times the value of the VLAN registration timer.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run hvrp timer registervlan-age timer-interval

    The aging timer of registered VLANs is set.

    The default value of the aging timer of registered VLANs is 15 seconds.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 285351

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next