No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of Multiple Instances Single-homed to an RRPP Aggregation Ring

Application of Multiple Instances Single-homed to an RRPP Aggregation Ring

In Figure 18-27, CEs access an RRPP ring through UPEs, and then access the backbone network through the PE-AGG.

Figure 18-27  Multiple instances single-homed to an RRPP aggregation ring

Four UPEs and one PE-AGG construct a ring in two domains: ring 1 in domain 1 and ring 1 in domain 2. Domain 1 processes data in VLANs 101 to 200 and domain 2 processes data in VLANs 1 to 100.

Domain 1 maps instance 1 and domain 2 maps instance 2. Services in VLANs 1 to 200 are sent from CEs.

Service VLANs processed in the two RRPP domains do not overlap and all service VLANs are processed. Traffic in domain 1 and domain 2 is load balanced on the RRPP ring.

Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 286282

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next