No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Switch to Age All VLANs

(Optional) Configuring a Switch to Age All VLANs

Context

On a network with one or more rings, you can enable a switch to age all VLANs or only the local VLANs.

You are advised to enable a switch to age all VLANs when the switch is located at the intersection point of rings.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run hvrp vlan-age all

    The switch is configured to age all VLANs.

    By default, only local VLANs are aged.

    NOTE:

    In HVRP, VLAN 1 is not identified as the local VLAN. When the PVID is not VLAN 1 and the hvrp vlan-age all command is executed, VLAN 1 will be aged.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 299734

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next