No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

S7700 and S9700 V200R011C10

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Principal VLAN for MUX VLANs

Configuring a Principal VLAN for MUX VLANs

Context

Interfaces in a principal VLAN can communicate with other interfaces in the same MUX VLAN.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan vlan-id

    A VLAN is created and the VLAN view is displayed. If the VLAN already exists, the VLAN view is displayed.

    The VLAN ID ranges from 1 to 4094. To create VLANs in a batch, run the vlan batch { vlan-id1 [ to vlan-id2 ] } &<1-10> command. Then run the vlan vlan-id command to enter the view of a specified VLAN.

    NOTE:

    If a device is configured with multiple VLANs, configure names for the VLANs to facilitate VLAN management.

    Run the name vlan-name command in the VLAN view. After a VLAN name is configured, you can run the vlan vlan-name vlan-name command in the system view to enter the corresponding VLAN view.

  3. Run mux-vlan

    The VLAN is configured as a principal VLAN.

    The VLAN ID assigned to a principal VLAN cannot be used to configure the super-VLAN or sub-VLAN. Additionally, it is not recommended that this VLAN ID be used to configure VLAN mapping and VLAN stacking.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178310

Views: 299835

Downloads: 141

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next